rlPimBsrCandidateRPGroupPrefixList

NETGEAR-RADLAN-PIM-BSR-MIB · .1.3.6.1.4.1.4526.17.220.1.3
Commands MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
Identifies a standard access list containing the
set of IP multicast group prefixes for which the
local router will advertise itself as a Candidate-RP
with the given RP address.
              
If there is any rule in the list with
aallStdAccessListIncluded set to 'false',
DC-PIM does not advertise this RP address as a
Candidate-RP.  Otherwise DC-PIM advertises the
RP address as a Candidate-RP for every IP multicast
group prefix corresponding to a rule in the access list
with row status 'active' and admin status 'up'.
              
rlPimBsrCandidateRPGroupPrefixList defaults to an empty string, which
indicates that no access list has yet been specified.
              
rlPimBsrCandidateRPStatus can only be set to 'active' if a
non-empty string has been specified for
rlPimBsrCandidateRPGroupPrefixList.

Context

MIB
NETGEAR-RADLAN-PIM-BSR-MIB
OID
.1.3.6.1.4.1.4526.17.220.1.3
Type
column
Access
readwrite
Status
current
Parent
rlPimBsrCandidateRPEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-PIM-BSR-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-PIM-BSR-MIB::rlPimBsrCandidateRPGroupPrefixList'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'NETGEAR-RADLAN-PIM-BSR-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-PIM-BSR-MIB::rlPimBsrCandidateRPGroupPrefixList.<rlPimBsrCandidateRPAddressType>.<rlPimBsrCandidateRPAddress>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'NETGEAR-RADLAN-PIM-BSR-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'NETGEAR-RADLAN-PIM-BSR-MIB::rlPimBsrCandidateRPGroupPrefixList'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255