NETGEAR-RADLAN-PIM-BSR-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
9
rlPimBsrCandidateRPTable
table
.1.3.6.1.4.1.4526.17.220
·
1 row entry
·
9 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk rlPimBsrCandidateRPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-PIM-BSR-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-PIM-BSR-MIB::rlPimBsrCandidateRPTable'
The (conceptual) table listing the IP multicast group prefixes for which the local router is to advertise itself as a Candidate-RP.
An entry (conceptual row) in the
rlPimBsrCandidateRPTable.
rlPimBsrCandidateRPTable.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The Inet address type of the Candidate-RP.
|
INET-ADDRESS-MIBInetAddressType Type Values:
|
.1.3.6.1.4.1.4526.17.220.1.1 |
||||||||||||||
|
The (unicast) address that will be advertised as a
Candidate-RP. The InetAddressType is given by the rlPimBsrCandidateRPAddressType object. If this is not an address on the local router, DC-PIM will not … |
OctetString Constraints: range: 4-4range: 8-8range: 16-16 |
.1.3.6.1.4.1.4526.17.220.1.2 |
||||||||||||||
|
Identifies a standard access list containing the
set of IP multicast group prefixes for which the local router will advertise itself as a Candidate-RP with the given RP address. If there is any rule in th… |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.4526.17.220.1.3 |
||||||||||||||
|
If this object is set to TRUE, this group range is
advertised with this RP as a BIDIR-PIM group range. If it is set to FALSE, it is advertised as a PIM-SM group range. DC-PIM only supports the value FALSE… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.4526.17.220.1.5 |
||||||||||||||
|
The time remaining before the local router next sends
a Candidate-RP-Advertisement to the elected BSR. This will be zero if the C-RP is shutting down or any of the following conditions are true: - the en… |
SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.4526.17.220.1.6 |
||||||||||||||
|
The priority for this Candidate RP advertised in
Candidate-RP-Advertisements. Numerically higher values for this object indicate lower priorities, with the value zero denoting the highest priority. |
Unsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.4526.17.220.1.7 |
||||||||||||||
|
A Candidate RP generates Candidate-RP-Advertisements
periodically. This object represents the time interval in seconds between two consecutive advertisements. |
secondsUnsigned32r/w Constraints: range: 1-26214 |
.1.3.6.1.4.1.4526.17.220.1.8 |
||||||||||||||
|
Holdtime for this Candidate RP. The amount of time (in
seconds) this Candidate-RP entry is valid. |
secondsUnsigned32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.4526.17.220.1.9 |
||||||||||||||
|
The status of this row, by which new entries may be
created, or old entries deleted from this table. All writable objects in this entry can be modified when the status of this entry is active(1). |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.4526.17.220.1.10 |
