netBotz-metric-onboard-doorajar
NETBOTZ-MIB ·
.1.3.6.1.4.1.5528.32.10.6
Object
scalar
mandatory
Integer32
The reading of the door switch probe open(1) or closed(0).
Context
- MIB
- NETBOTZ-MIB
- OID
.1.3.6.1.4.1.5528.32.10.6- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- netBotz-metric-onboard
- Siblings
- 16
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| netBotz-metric-onboard-model mandatory The model description of the appliance. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.5528.32.10.1 |
| netBotz-metric-onboard-humidity-max mandatory The humidity probe maximum, from 10 to 90 percent. | scalar | Integer32 | .1.3.6.1.4.1.5528.32.10.10 |
| netBotz-metric-onboard-airflow-mins mandatory Minutes without airflow before alarm set. | scalar | Integer32 | .1.3.6.1.4.1.5528.32.10.11 |
| netBotz-metric-onboard-audio-secs mandatory Seconds of alarm audio before alarm set. | scalar | Integer32 | .1.3.6.1.4.1.5528.32.10.12 |
| netBotz-metric-onboard-switch-state mandatory Switch state setting. The state controls which condition of the door switch indicates an alarm. If set to 0, alarm is set when the switch is closed. If set to 1, alarm is set w… | scalar | Integer32 | .1.3.6.1.4.1.5528.32.10.13 |
| netBotz-metric-onboard-audio-level mandatory Audio level setting, this is the relative audio level, from 0-11, above which an alarm will be sent. | scalar | Integer32 | .1.3.6.1.4.1.5528.32.10.14 |
| netBotz-metric-onboard-airflow-level mandatory Airflow alert level. This is the level, in meters per second, below which an alarm will be sent. | scalar | Integer32 | .1.3.6.1.4.1.5528.32.10.15 |
| netBotz-metric-onboard-cam-motion mandatory The current motion reading for the camera motion sensor (0=none, 1=motion detected, -1=not licensed). | scalar | Integer32 | .1.3.6.1.4.1.5528.32.10.16 |
| netBotz-metric-onboard-cam-motion-sensitivity mandatory Camera motion sensor sensitivity: 1=max, 15=min, 0=disabled. | scalar | Integer32 | .1.3.6.1.4.1.5528.32.10.17 |
| netBotz-metric-onboard-temp mandatory The reading of the built-in temperature probe, in tenths of a degree C. | scalar | Integer32 | .1.3.6.1.4.1.5528.32.10.2 |
| netBotz-metric-onboard-humidity mandatory The reading of the built-in humidity probe, in percent. | scalar | Integer32 | .1.3.6.1.4.1.5528.32.10.3 |
| netBotz-metric-onboard-airflow mandatory The reading of the built-in airflow probe, in meters/minute. | scalar | Integer32 | .1.3.6.1.4.1.5528.32.10.4 |
| netBotz-metric-onboard-audio mandatory The reading of the built-in audio alarm probe on/off. | scalar | Integer32 | .1.3.6.1.4.1.5528.32.10.5 |
| netBotz-metric-onboard-temp-min mandatory The temperature probe minimum, from 1 to 50 degrees C in tenths of a degree C. | scalar | Integer32 | .1.3.6.1.4.1.5528.32.10.7 |
| netBotz-metric-onboard-temp-max mandatory The temperature probe maximum, from 1 to 50 degrees C in tenths of a degree C. | scalar | Integer32 | .1.3.6.1.4.1.5528.32.10.8 |
| netBotz-metric-onboard-humidity-min mandatory The humidity probe minimum, from 10 to 90 percent. | scalar | Integer32 | .1.3.6.1.4.1.5528.32.10.9 |