nbsSffWdmLaserWavelength
NBS-SFF-MIB ·
.1.3.6.1.4.1.629.204.1.2.1.1.16
Object
column
OctetString
Nominal transmitter output wavelength.
For SFPs, per Specification for DWDM SFP Transceiver,
section 2.2.1, The laser wavelength
is equal to the 16 bit integer value in nm (16 bit value with
byte 60 as high order byte and byte 61 as low order byte) and
with the fractional part of the wavelength in units of 0.01nm
(byte 62).
For XFPs,per specification for INF8077i, see section 5.33
Context
- MIB
- NBS-SFF-MIB
- OID
.1.3.6.1.4.1.629.204.1.2.1.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- nbsSffWdmEntry
- Table
- nbsSffWdmTable
- Siblings
- 18
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-150
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nbsSffWdmClassOfPower Extended identifier of class of Power. | column | Enumeration | .1.3.6.1.4.1.629.204.1.2.1.1.1 |
| nbsSffWdmVariableDecisionThreshold DWDM Variable Decission Threshold. | column | Enumeration | .1.3.6.1.4.1.629.204.1.2.1.1.10 |
| nbsSffWdmWavelengthMonitorType DWDM Wavelength monitor type in A2 byte. | column | Enumeration | .1.3.6.1.4.1.629.204.1.2.1.1.11 |
| nbsSffWdmExtTransmitPowerType DWDM Extended Transmit Power Type. | column | Enumeration | .1.3.6.1.4.1.629.204.1.2.1.1.12 |
| nbsSffWdmVariableOpticalAttenuator DWDM Variable Optical Atttenuator. | column | Enumeration | .1.3.6.1.4.1.629.204.1.2.1.1.13 |
| nbsSffWdmPilotToneFunctionality DWDM Pilot Tone Functionality. | column | Enumeration | .1.3.6.1.4.1.629.204.1.2.1.1.14 |
| nbsSffWdmOptionalInterruptPin DWDM Optional Interrupt Pin. | column | Enumeration | .1.3.6.1.4.1.629.204.1.2.1.1.15 |
| nbsSffWdmFrequency Nominal transmitter frequency, in MHz | column | NBS-MIBNbsTcMHz | .1.3.6.1.4.1.629.204.1.2.1.1.17 |
| nbsSffWdmChannelBand ITU Channel Band | column | NBS-CMMCENUM-MIBNbsCmmcChannelBand | .1.3.6.1.4.1.629.204.1.2.1.1.18 |
| nbsSffWdmChannelNumber ITU Channel Number | column | Integer32 | .1.3.6.1.4.1.629.204.1.2.1.1.19 |
| nbsSffWdmClassOfTemperature Extended identifier of class of Temperature.
class0 - Temperature in [-5, 70C]
class1 - Temperature in [-40, 85C]
class2 - reserved
class3 - defined by MIB objects nbsSffDwdmMaxCa… | column | Enumeration | .1.3.6.1.4.1.629.204.1.2.1.1.2 |
| nbsSffWdmClassOfWdm Extended identifier of class of WDM.
1 - No WDM
2 - CWDM
3 - DWDM
4 - Reserved | column | Enumeration | .1.3.6.1.4.1.629.204.1.2.1.1.3 |
| nbsSffWdmOpticalReach This value specifies the link length in kilometers that is
supported by the transceiver while operating in compliance
with the applicable standards using single mode fiber. | column | Integer32 | .1.3.6.1.4.1.629.204.1.2.1.1.4 |
| nbsSffWdmMaxCaseTemperature This field defines the maximum operating case temperature in
Celsius. For WDMs, this value is in byte 15 in A0h, For XFPs,
this value is in byte 190. | column | Integer32 | .1.3.6.1.4.1.629.204.1.2.1.1.5 |
| nbsSffWdmMinCaseTemperature This field defines the minimum operating case temperature
in Celsius. | column | Integer32 | .1.3.6.1.4.1.629.204.1.2.1.1.6 |
| nbsSffWdmMaxSupplyCurrent This field defines the maximum supply current, in milli Amps,
which the module will consume under worst case conditions. | column | Integer32 | .1.3.6.1.4.1.629.204.1.2.1.1.7 |
| nbsSffWdmNumberOfChannels This specifies the tuning range from 1 to 63, where 1
indicates this module is not tunable by user commands. | column | Integer32 | .1.3.6.1.4.1.629.204.1.2.1.1.8 |
| nbsSffWdmChannelSpacing This field identifies the densest channel spacing the module
is compatible with and the number of channels over which the
module may be tuned by user command. | column | Enumeration | .1.3.6.1.4.1.629.204.1.2.1.1.9 |