myRipRecommendSetting
MY-RIP-MIB ·
.1.3.6.1.4.1.4881.1.1.10.2.13.1.5
Object
scalar
r/w
Enumeration
User can set this object to 1,2,3.
1 means that the system sending and receiving RIP version1 packets,
2 means that the system sending and receiving RIP version2 packets,
3 means that the system sending RIP version1 packets and receiving both
RIP version1 and RIP version2 packets.
If the system RIP interface configuration has been modified by user,this
object will be 4.
Context
- MIB
- MY-RIP-MIB
- OID
.1.3.6.1.4.1.4881.1.1.10.2.13.1.5- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- myRIPMIBObjects
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | ripv1 |
2 | ripv2 |
3 | compatible |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| myRipEnable Rip management function status | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.4881.1.1.10.2.13.1.1 |
| myRipValidateUpdateSrcEnable This object allow of enabling or disabling validate the
source IP address of incoming RIP routing updates. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.4881.1.1.10.2.13.1.10 |
| myRipPassiveStatus The myRipIfPassiveStatus of a interface equal to this object value
when this interface is created. If you change this object value to 'enabled'
or 'disabled'all interfaces which h… | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.4881.1.1.10.2.13.1.11 |
| myRipNextDueIn Waitting time interval before next update packet generatting
in units of second | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.4881.1.1.10.2.13.1.12 |
| myRipIfOffsetTable The interface configuration about offset.
Apply an offset list to routing metrics to increase incoming and
outgoing metrics to routes learned through RIP. You can limit
the offs… | table | - | .1.3.6.1.4.1.4881.1.1.10.2.13.1.13 |
| myRipNetworkTable the network for rip routing. | table | - | .1.3.6.1.4.1.4881.1.1.10.2.13.1.14 |
| myRipNeighborTable the neighbor for rip routing. | table | - | .1.3.6.1.4.1.4881.1.1.10.2.13.1.15 |
| myRipUpdateTime The rate (time in seconds between updates) at which routing updates are sent. | scalar | Integer32 | .1.3.6.1.4.1.4881.1.1.10.2.13.1.2 |
| myRipInvalidTime The interval of time (in seconds) after which a route is declared invalid. | scalar | Integer32 | .1.3.6.1.4.1.4881.1.1.10.2.13.1.3 |
| myRipHolddownTime The amount of time (in seconds) that must pass before a route
is removed from the routing table | scalar | Integer32 | .1.3.6.1.4.1.4881.1.1.10.2.13.1.4 |
| myRipIfStatTable A list of subnets which require separate
status monitoring in RIP. | table | - | .1.3.6.1.4.1.4881.1.1.10.2.13.1.6 |
| myRipIfConfTable A list of interfaces which require separate
configuration in RIP. | table | - | .1.3.6.1.4.1.4881.1.1.10.2.13.1.7 |
| myRipOffsetMetric This object means the value of increasing incoming
and outgoing metrics to routes learned via RIP | scalar | Integer32 | .1.3.6.1.4.1.4881.1.1.10.2.13.1.8 |
| myRipAdministrativeDistance This object specified the priority of route information learned via RIP. | scalar | Integer32 | .1.3.6.1.4.1.4881.1.1.10.2.13.1.9 |