MY-RIP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
22

myRipIfStatTable

table
.1.3.6.1.4.1.4881.1.1.10.2.13.1.6 · 1 row entry · 4 columns
Open in standard view 
A list of subnets which require separate
status monitoring in RIP.
myRipIfStatEntry entry .1.3.6.1.4.1.4881.1.1.10.2.13.1.6.1
A Single Routing Domain in a single Subnet.
Indexes
myRipIfStatIfIndex
Column Syntax OID
myRipIfStatIfIndex
VID of vlan which each net interface associate.
MY-TCIfIndex
Textual Convention: MY-TCIfIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.6.1.1
myRipIfStatRcvBadPackets
The number of RIP response packets received by
the RIP process which were subsequently discarded
for any reason (e.g. a version 0 packet, or an
unknown command type).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.6.1.2
myRipIfStatRcvBadRoutes
The number of routes, in valid RIP packets,
which were ignored for any reason (e.g. unknown
address family, or invalid metric).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.6.1.3
myRipIfStatSentUpdates
The number of triggered RIP updates actually
sent on this interface. This explicitly does
NOT include full updates sent containing new
information.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.6.1.4

myRipIfConfTable

table
.1.3.6.1.4.1.4881.1.1.10.2.13.1.7 · 1 row entry · 8 columns
Open in standard view 
A list of interfaces which require separate
configuration in RIP.
myRipIfConfEntry entry .1.3.6.1.4.1.4881.1.1.10.2.13.1.7.1
A Single Routing Domain in a single interface.
Indexes
myRipIfConfIfIndex
Column Syntax OID
myRipIfConfIfIndex
IfIndex vale of vlan interface.
MY-TCIfIndex
Textual Convention: MY-TCIfIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.7.1.1
myRipIfConfAuthType
The type of Authentication used on this
interface.
Enumerationr/w
Enumerated Values:
1noAuthentication
2simplePassword
3md5
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.7.1.2
myRipIfConfAuthKeyChain
The key chain name which interface associated. It indicate that
this interface doesn't match any key chain which this string is null
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.7.1.3
myRipIfConfSend
What the router sends on this interface.
ripVersion1 implies sending RIP updates compliant
with RFC 1058. rip1Compatible implies
broadcasting RIP-2 updates using RFC 1058 route
subsumption rules. ripVersion2 implie…
Enumerationr/w
Enumerated Values:
1ripVersion1
2rip1Compatible
3ripVersion2
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.7.1.4
myRipIfConfReceive
This indicates which version of RIP updates
are to be accepted. Note that rip2 and
rip1OrRip2 implies reception of multicast
packets.
Enumerationr/w
Enumerated Values:
1rip1
2rip2
3rip1OrRip2
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.7.1.5
myRipIfPassiveStatus
The interface will not send routing updates if this value is 'enabled'
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.7.1.6
myRipIfBroadcastEnable
Enable or disable broadcast updats of RIP in this interface
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.7.1.7
myRipIfAdminStat
The RIP interface's administrative status.
The value formed on the interface, and the in-
terface will be advertised as an internal route
to some area. The value 'disabled' denotes
that the interface is externa…
P-BRIDGE-MIBEnabledStatus
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.7.1.8

myRipIfOffsetTable

table
.1.3.6.1.4.1.4881.1.1.10.2.13.1.13 · 1 row entry · 5 columns
Open in standard view 
The interface configuration about offset.
Apply an offset list to routing metrics to increase incoming and 
outgoing metrics to routes learned through RIP. You can limit 
the offset list with an access list or an interface.
myRipIfOffsetEntry entry .1.3.6.1.4.1.4881.1.1.10.2.13.1.13.1
the entry of this table.
Indexes
myRipIfOffsetIfIndex myRipIfOffsetMethod
Column Syntax OID
myRipIfOffsetIfIndex
the interface that this offset list apply to.

If this value is 0,it indicate that this offset list apply in all
interfaces except the interfaceswhich which have not Offset configure.

Other…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.13.1.1
myRipIfOffsetMethod
the offset list apply to incoming routes or
outgoing routes.
Enumeration
Enumerated Values:
1out
2in
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.13.1.2
myRipIfOffsetAclName
the offset list with Access list name .
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.13.1.3
myRipIfOffsetMetric
the offset list with offset value,
in condition the value will be added to route metric.
Unsigned32r/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.13.1.4
myRipIfOffsetStatus
if this value is setted destroy,
the entry will be deleted .
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.13.1.5

myRipNetworkTable

table
.1.3.6.1.4.1.4881.1.1.10.2.13.1.14 · 1 row entry · 3 columns
Open in standard view 
the network for rip routing.
myRipNetworkEntry entry .1.3.6.1.4.1.4881.1.1.10.2.13.1.14.1
the entry of this table.
Indexes
myRipNetworkAddr
Column Syntax OID
myRipNetworkAddr
define a network for rip routing .
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.14.1.1
myRipNetworkMask
define a network's mask for rip routing .
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.14.1.2
myRipNetworkStatus
if destroy is setted,
this entry will be deleted .
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.14.1.3

myRipNeighborTable

table
.1.3.6.1.4.1.4881.1.1.10.2.13.1.15 · 1 row entry · 2 columns
Open in standard view 
the neighbor for rip routing.
myRipNeighborEntry entry .1.3.6.1.4.1.4881.1.1.10.2.13.1.15.1
the entry of this table.
Indexes
myRipNeighborIndex
Column Syntax OID
myRipNeighborIndex
define a neighbor for rip .
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.15.1.1
myRipNeighborStatus
if destroy is setted,
this entry will be deleted.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4881.1.1.10.2.13.1.15.1.2