myPimInterfaceBsrBorderEnabled
MY-PIM-MIB ·
.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.23
Object
Enabled means Define a PIM bootstrap message boundary for the PIM domain,use disabled to remove the PIM border.
Context
- MIB
- MY-PIM-MIB
- OID
.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.23- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- myPimInterfaceEntry
- Table
- myPimInterfaceTable
- Siblings
- 25
Syntax
P-BRIDGE-MIBEnabledStatus
- Source
- P-BRIDGE-MIBEnabledStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| myPimInterfaceIfIndex The ifIndex value of this PIM interface. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.1 |
| myPimInterfaceHelloHoldtime The value set in the Holdtime field of Hello messages
transmitted on this interface. This should be 3.5
times the value of pimInterfaceHelloInterval. | column | seconds Integer32 | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.10 |
| myPimInterfacePropagationDelay The value inserted into the LAN Prune Delay field of a
LAN Prune Delay option on this interface. | column | milliseconds Integer32 | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.12 |
| myPimInterfaceOverrideInterval The value inserted into the Override Interval field of
a LAN Prune Delay option on this interface. | column | Integer32 | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.13 |
| myPimInterfaceJoinPruneHoldtime The value inserted into the Holdtime field of a Join/
Prune message sent on this interface. The value should
be 3.5 times pimInterfaceJoinPruneInterval. | column | seconds Integer32 | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.15 |
| myPimInterfaceGraftRetryInterval The interval a PIM router waits for a Graft Ack before
resending a Graft on this interface. | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.16 |
| myPimInterfaceMaxGraftRetries The maximum number of times this router will resend a
Graft on this interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.17 |
| myPimInterfaceSRTTLThreshold The Time To Live in a PIM-DM Refresh message at
which it is not forwarded on this interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.18 |
| myPimInterfaceLanDelayEnabled Evaluates to TRUE if all routers on this interface are
using the LAN Prune Delay Option. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.19 |
| myPimInterfaceAddress The IP address of the PIM interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.2 |
| myPimInterfaceSRCapable Evaluates to TRUE if all routers on this interface are
using the State Refresh Capable Option. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.20 |
| myPimInterfaceDRPriority The Designater Router Priority inserted into the DR
priority option on this interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.21 |
| myPimInterfaceNbrCounter The number of interface's neighbour. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.22 |
| myPimInterfaceCountIn Number of packets into the interface since the
router has been up. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.24 |
| myPimInterfaceCountOut Number of packets out of the interface
since the router has been up. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.25 |
| myPimInterfaceEnabled use the ip pim command in interface configuration mode.
To disable PIM on the interface, use the no form of this
command. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.26 |
| myPimNeighborFilterAcl The name of the neighbor filter address list,which limits
the scope of the neighbor,The default value means all
neighbors will be allowed. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.27 |
| myPimDrSupportAddressBound The name of the DR support address list,which limits the scope of
the souce address ,this will be only used when the interface is DR,
The default value means all souce address w… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.28 |
| myPimInterfaceNetMask The network mask for the IP address of the PIM interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.3 |
| myPimInterfaceMode The configured mode of this PIM interface. A value of
sparseDense is only valid for PIMv1. | column | Enumeration | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.4 |
| myPimInterfaceDR The Designated Router on this PIM interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.5 |
| myPimInterfaceHelloInterval The frequency at which PIM Hello messages are transmitted
on this interface. | column | seconds Integer32 | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.6 |
| myPimInterfaceJoinPruneInterval The frequency at which PIM Join/Prune messages are
transmitted on this PIM interface. The default value of
this object is the pimJoinPruneInterval. | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.7 |
| myPimInterfaceCBSRPreference The preference value for the local interface as a candidate
bootstrap router. The value of -1 is used to indicate that
the local interface is not a candidate BSR interface. | column | Integer32 | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.8 |
| myPimInterfaceTrigHelloInterval The maximum time before a triggered PIM Hello message
is transmitted on this interface. | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.9 |