MY-PIM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

myPimInterfaceTable

table

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2 · 1 row entry · 26 columns

Open in standard view

The (conceptual) table listing the router's PIM interfaces.
IGMP and PIM are enabled on all interfaces listed in this
table.

myPimInterfaceEntry entry .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1

An entry (conceptual row) in the myPimInterfaceTable.

Indexes

myPimInterfaceIfIndex

Column Syntax OID

myPimInterfaceIfIndex

The ifIndex value of this PIM interface.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.1

myPimInterfaceAddress

The IP address of the PIM interface.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.2

myPimInterfaceNetMask

The network mask for the IP address of the PIM interface.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.3

myPimInterfaceMode

The configured mode of this PIM interface. A value of
sparseDense is only valid for PIMv1.

Enumerationr/w

Enumerated Values:

1	dense
2	sparse
3	sparseDense

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.4

myPimInterfaceDR

The Designated Router on this PIM interface.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.5

myPimInterfaceHelloInterval

The frequency at which PIM Hello messages are transmitted
on this interface.

secondsInteger32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.6

myPimInterfaceJoinPruneInterval

The frequency at which PIM Join/Prune messages are
transmitted on this PIM interface. The default value of
this object is the pimJoinPruneInterval.

secondsSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.7

myPimInterfaceCBSRPreference

The preference value for the local interface as a candidate
bootstrap router. The value of -1 is used to indicate that
the local interface is not a candidate BSR interface.

Integer32r/w

Constraints:
range: -1-255

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.8

myPimInterfaceTrigHelloInterval

The maximum time before a triggered PIM Hello message
is transmitted on this interface.

secondsSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.9

myPimInterfaceHelloHoldtime

The value set in the Holdtime field of Hello messages
transmitted on this interface. This should be 3.5
times the value of pimInterfaceHelloInterval.

secondsInteger32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.10

myPimInterfacePropagationDelay

The value inserted into the LAN Prune Delay field of a
LAN Prune Delay option on this interface.

millisecondsInteger32r/w

Constraints:
range: 0-32767

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.12

myPimInterfaceOverrideInterval

The value inserted into the Override Interval field of
a LAN Prune Delay option on this interface.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.13

myPimInterfaceJoinPruneHoldtime

The value inserted into the Holdtime field of a Join/
Prune message sent on this interface. The value should
be 3.5 times pimInterfaceJoinPruneInterval.

secondsInteger32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.15

myPimInterfaceGraftRetryInterval

The interval a PIM router waits for a Graft Ack before
resending a Graft on this interface.

secondsSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.16

myPimInterfaceMaxGraftRetries

The maximum number of times this router will resend a
Graft on this interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.17

myPimInterfaceSRTTLThreshold

The Time To Live in a PIM-DM Refresh message at
which it is not forwarded on this interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.18

myPimInterfaceLanDelayEnabled

Evaluates to TRUE if all routers on this interface are
using the LAN Prune Delay Option.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.19

myPimInterfaceSRCapable

Evaluates to TRUE if all routers on this interface are
using the State Refresh Capable Option.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.20

myPimInterfaceDRPriority

The Designater Router Priority inserted into the DR
priority option on this interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.21

myPimInterfaceNbrCounter

The number of interface's neighbour.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.22

myPimInterfaceBsrBorderEnabled

Enabled means Define a PIM bootstrap message boundary
for the PIM domain,use disabled to remove the PIM border.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.23

myPimInterfaceCountIn

Number of packets into the interface since the
router has been up.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.24

myPimInterfaceCountOut

Number of packets out of the interface
since the router has been up.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.25

myPimInterfaceEnabled

use the ip pim command in interface configuration mode.
To disable PIM on the interface, use the no form of this
command.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.26

myPimNeighborFilterAcl

The name of the neighbor filter address list,which limits
the scope of the neighbor,The default value means all
neighbors will be allowed.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.27

myPimDrSupportAddressBound

The name of the DR support address list,which limits the scope of
the souce address ,this will be only used when the interface is DR,
The default value means all souce address will be allowed.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.28

myPimNeighborTable

table

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.3 · 1 row entry · 10 columns

Open in standard view

The (conceptual) table listing the router's PIM neighbors.

myPimNeighborEntry entry .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.3.1

An entry (conceptual row) in the myPimNeighborTable.

Indexes

myPimNeighborAddress

Column Syntax OID

myPimNeighborAddress

The IP address of the PIM neighbor for which this entry
contains information.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.3.1.1

myPimNeighborIfIndex

The value of ifIndex for the interface used to reach this
PIM neighbor.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.3.1.2

myPimNeighborUpTime

The time since this PIM neighbor (last) became a neighbor
of the local router.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.3.1.3

myPimNeighborExpiryTime

The minimum time remaining before this PIM neighbor will be
aged out.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.3.1.4

myPimNeighborMode deprecated

The active PIM mode of this neighbor. This object is
deprecated for PIMv2 routers since all neighbors on the
interface must be either dense or sparse as determined by
the protocol running on the interface.

Enumeration

Enumerated Values:

1	dense
2	sparse

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.3.1.5

myPimNeighborLanPruneDelay

The value of LAN Prune Delay field of the LAN Prune
Delay Option received from this neighbor. A value of
0 indicates that no LAN Prune Delay Option was
received from this neigbor.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.3.1.6

myPimNeighborOverrideInterval

The value of Override Interval field of the LAN Prune
Delay Option received from this neighbor. A value of
0 indicates that no LAN Prune Delay Option was
received from this neigbor.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.3.1.7

myPimNeighborTBit

The value of the T bit field of the LAN Prune
Delay Option received from this neighbor. The T bit
specifies the ability of the neighbor to disable
join suppression.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.3.1.8

myPimNeighborSRCapable

Evaluates to TRUE if this neighbor is using the State
Refresh Capable Option.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.3.1.9

myPimNeighborDRPresent

Evaluates to TRUE if this neighbor is using the
Designated Router Option.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.3.1.10

myPimIpMRouteTable

table

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.4 · 1 row entry · 7 columns

Open in standard view

The (conceptual) table listing PIM-specific information on
a subset of the rows of the ipMRouteTable defined in the IP
Multicast MIB.

myPimIpMRouteEntry entry .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.4.1

An entry (conceptual row) in the pimIpMRouteTable. There
is one entry per entry in the ipMRouteTable whose incoming
interface is running PIM.

Indexes

IPMROUTE-STD-MIBipMRouteGroup IPMROUTE-STD-MIBipMRouteSource IPMROUTE-STD-MIBipMRouteSourceMask

Column Syntax OID

myPimIpMRouteUpstreamAssertTimer

The time remaining before the router changes its upstream
neighbor back to its RPF neighbor. This timer is called the
Assert timer in the PIM Sparse and Dense mode specification.
A value of 0 indicates that no Assert h…

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.4.1.1

myPimIpMRouteAssertMetric

The metric advertised by the assert winner on the upstream
interface, or 0 if no such assert is in received.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.4.1.2

myPimIpMRouteAssertMetricPref

The preference advertised by the assert winner on the
upstream interface, or 0 if no such assert is in effect.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.4.1.3

myPimIpMRouteAssertRPTBit

The value of the RPT-bit advertised by the assert winner on
the upstream interface, or false if no such assert is in
effect.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.4.1.4

myPimIpMRouteRPFNeighbor

The IP Address of the current RPF neighbor. If there
is an upstream Assert Winner, it will be the RPF
neighbor. Otherwise, the RPF neighbor will be
the next hop indicated by unicast routing.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.4.1.6

myPimIpMRouteSourceTimer

The time before this router ceases originating State
Refresh messages for this route.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.4.1.7

myPimIpMRouteOriginatorSRTTL

The TTL used in State Refresh messages originated by
this router for this route.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.4.1.8

myPimIpMRouteNextHopTable

table

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.5 · 1 row entry · 6 columns

Open in standard view

The (conceptual) table listing PIM-specific information on
a subset of the rows of the ipMRouteNextHopTable defined in
the IP Multicast MIB.

myPimIpMRouteNextHopEntry entry .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.5.1

An entry (conceptual row) in the pimIpMRouteNextHopTable.
There is one entry per entry in the ipMRouteNextHopTable
whose interface is running PIM and whose
ipMRouteNextHopState is pruned(1).

Indexes

IPMROUTE-STD-MIBipMRouteNextHopGroup IPMROUTE-STD-MIBipMRouteNextHopSource IPMROUTE-STD-MIBipMRouteNextHopSourceMask IPMROUTE-STD-MIBipMRouteNextHopIfIndex IPMROUTE-STD-MIBipMRouteNextHopAddress

Column Syntax OID

myPimIpMRouteNextHopPruneReason

This object indicates why the downstream interface was
pruned, whether in response to a PIM prune message or due to
PIM Assert processing.

Enumeration

Enumerated Values:

1	other
2	prune
3	assert

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.5.1.1

myPimIpMRouteNextHopAssertWinner

The IP Address of the Assert Winner.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.5.1.2

myPimIpMRouteNextHopAssertTimer

The time remaining before the PIM router leaves the
current Assert state. A value of 0 indicates that the
router is in the No Info state.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.5.1.3

myPimIpMRouteNextHopAssertMetric

The metric advertised by the Assert Winner.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.5.1.4

myPimIpMRouteNextHopAssertMetricPref

The metric preference advertised by the Assert Winner.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.5.1.5

myPimIpMRouteNextHopJoinPruneTimer

The time remaining before the PIM router reverts to
default operation on this interface. PIM-SM will
cease forwarding, PIM-DM will resume forwarding.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.5.1.6

myPimRPSetTable

table

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.6 · 1 row entry · 7 columns

Open in standard view

The (conceptual) table listing PIM information for
candidate Rendezvous Points (RPs) for IP multicast groups.
When the local router is the BSR, this information is
obtained from received Candidate-RP-Advertisements.  When
the local router is not the BSR, this information is
obtained from received RP-Set messages.

myPimRPSetEntry entry .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.6.1

An entry (conceptual row) in the pimRPSetTable.

Indexes

myPimRPSetComponent myPimRPSetGroupAddress myPimRPSetGroupMask myPimRPSetAddress

Column	Syntax	OID
myPimRPSetGroupAddress The IP multicast group address which, when combined with pimRPSetGroupMask, gives the group prefix for which this entry contains information about the Candidate-RP.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.6.1.1`
myPimRPSetGroupMask The multicast group address mask which, when combined with pimRPSetGroupAddress, gives the group prefix for which this entry contains information about the Candidate-RP.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.6.1.2`
myPimRPSetAddress The IP address of the Candidate-RP.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.6.1.3`
myPimRPSetHoldTime The holdtime of a Candidate-RP.	secondsInteger32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.6.1.4`
myPimRPSetExpiryTime The minimum time remaining before the Candidate-RP will be declared down.	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.6.1.5`
myPimRPSetComponent A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value.	Integer32 Constraints: `range: 1-255`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.6.1.6`
myPimRPSetUpTime Length of time that this rp has been up.	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.6.1.7`

myPimComponentTable

table

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.7 · 1 row entry · 9 columns

Open in standard view

The (conceptual) table containing objects specific to a PIM
domain.  One row exists for each domain to which the router
is connected.  A PIM-SM domain is defined as an area of the
network over which Bootstrap messages are forwarded.
Typically, a PIM-SM router will be a member of exactly one
domain.  This table also supports, however, routers which
may form a border between two PIM-SM domains and do not
forward Bootstrap messages between them.

myPimComponentEntry entry .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.7.1

An entry (conceptual row) in the starPimComponentTable.

Indexes

myPimComponentIndex

Column	Syntax	OID
myPimComponentIndex A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Routers that only support membership in a single PIM-SM domain should use a pimCo…	Integer32 Constraints: `range: 1-255`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.7.1.1`
myPimComponentBSRAddress The IP address of the bootstrap router (BSR) for the local PIM region.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.7.1.2`
myPimComponentBSRExpiryTime The minimum time remaining before the bootstrap router in the local domain will be declared down. For candidate BSRs, this is the time until the component sends an RP-Set message. For other routers, this is the time u…	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.7.1.3`
myPimComponentCRPHoldTime The holdtime of the component when it is a candidate RP in the local domain.	secondsInteger32r/w Constraints: `range: 0-255`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.7.1.4`
myPimComponentBSRUptime Length of time that this router has been up.	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.7.1.5`
myPimComponentBSRPriority The Priority of Bsr.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.7.1.6`
myPimComponentBSRHashMaskLength Length of a mask (32 bits maximum) that is to be ANDed with the group address before the hash function is called.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.7.1.7`
myPimComponentBSRNextBsrMessage Time (in hours, minutes, and seconds) in which the next bootstrap message is due from this BSR.	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.7.1.8`
myPimComponentNextCandRPAdv Time (in hours, minutes, and seconds) in which the next candidate RP advertisement will be sent.	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.7.1.9`

myPimRPTable

table

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.13 · 1 row entry · 4 columns

Open in standard view

The (conceptual) table listing PIM version 2 information
for the Rendezvous Points (RPs) for IP multicast groups.

myPimRPEntry entry .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.13.1

An entry (conceptual row) in the pimRPTable.

Indexes

myPimRPGroupAddress

Column	Syntax	OID
myPimRPGroupAddress The IP multicast group address which, when combined with pimRPSetGroupMask, gives the group prefix for which this entry contains information about the Candidate-RP.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.13.1.1`
myPimRPAddress The IP address of the RP.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.13.1.2`
myPimRPExpiryTime The minimum time remaining before the RP will be declared down. If the local router is not the BSR, this value is 0.	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.13.1.3`
myPimRPNextRPReachableIn Indicates the time the next RP-reachable message will be sent. Time is expressed in hours:minutes:seconds.	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.13.1.4`

myPimStaticRPTable

table

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.14 · 1 row entry · 4 columns

Open in standard view

The (conceptual) table listing PIM version 2 information
for the Rendezvous Points (RPs) for IP multicast groups.

myPimStaticRPEntry entry .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.14.1

An entry (conceptual row) in the pimStaticRPTable.

Indexes

myPimStaticRPAddress

Column Syntax OID

myPimStaticRPAddress

The IP address of the RP.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.14.1.1

myPimStaticRPAddressIsOverride

Indicates that if there is a conflict, the RP configured with
this command prevails over the RP learned by Bsr-RP.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.14.1.2

myPimStaticRPAclName

Name of an access list that defines for which
multicast groups the RP should be used,the
default value means all groups should be
used.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.14.1.3

myPimStaticRPStatus

The status of this entry. Creating the entry enables PIM
on the interface; destroying the entry disables PIM on the
interface.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.14.1.4

myPimRpCandidateTable

table

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.15 · 1 row entry · 3 columns

Open in standard view

The (conceptual) table listing the IP multicast groups for
which the local router is to advertise itself as a
Candidate-RP when the value of pimComponentCRPHoldTime is
non-zero.  If this table is empty, then the local router
will advertise itself as a Candidate-RP for all groups
(providing the value of pimComponentCRPHoldTime is non-
zero).

myPimRpCandidateEntry entry .1.3.6.1.4.1.4881.1.1.10.2.27.1.1.15.1

An entry (conceptual row) in the pimRpCandidateTable.

Indexes

myPimRpCandidateIfindex

Column Syntax OID

myPimRpCandidateIfindex

IP address associated with this interface type and number
is advertised as a candidate RP address.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.15.1.1

myPimRpCandidateAclName

The name of Acl list,that defines the group
prefixes that are advertised in association
with the RP address,the default value means
all groups will be advertised in association
with the RP address.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.15.1.2

myPimRpCandidateStatus

The status of this entry. Creating the entry enables PIM
on the interface; destroying the entry disables PIM on the
interface.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.4881.1.1.10.2.27.1.1.15.1.3