eamTimerVariantsResetSpecific
MX-EAM-MIB ·
.0.1880.1.100.300.1.1900
Object
column
r/w
Enumeration
Reset Specific
Resets specific settings of E&M Timers parameters with the
default signaling type settings. This command is used to
retrieve the default configuration of the selected Signaling
Type set in the SignalingType parameter.
Context
- MIB
- MX-EAM-MIB
- OID
.0.1880.1.100.300.1.1900- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- eamTimerVariantsEntry
- Table
- eamTimerVariantsTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | noOp |
10 | resetSpecific |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eamTimerVariantsInterfaceName Interface Name
Identifies the interface. | column | OctetString | .0.1880.1.100.300.1.100 |
| eamTimerVariantsFwdWaitPreDialTimeout Wait PreDial Timeout
The amount of time an outgoing register waits after the wink
to start dialing.
This value is expressed in milliseconds (ms). | column | Integer32 | .0.1880.1.100.300.1.1000 |
| eamTimerVariantsFwdWaitAnswerTimeout Wait Answer Timeout
The maximum time an outgoing register waits for the call to
be answered.
This value is expressed in milliseconds (ms). | column | Integer32 | .0.1880.1.100.300.1.1100 |
| eamTimerVariantsFwdClearForwardTimeout Clear Forward Timeout
The maximum time an outgoing register waits after sending a
clear forward line signal before transiting to the idle
state.
This… | column | Integer32 | .0.1880.1.100.300.1.1200 |
| eamTimerVariantsReleaseGuardTimeout Release Guard Timeout
Maximum time a register waits after sending an idle line
signal to prevent a new seizure of the line.
This value is expressed i… | column | Integer32 | .0.1880.1.100.300.1.1300 |
| eamTimerVariantsOverrideDefault Override Default
Overrides the default settings of E&M Signaling parameters
for the SignalingType and InterfaceName.
* Disable: The interface uses … | column | MX-TCMxEnableState | .0.1880.1.100.300.1.200 |
| eamTimerVariantsBwdWaitPreWinkTimeout Seizure Ack Timeout
Amount of time an incoming register waits before sending the
wink that acknowledges the seizure.
This value is expressed in milli… | column | Integer32 | .0.1880.1.100.300.1.300 |
| eamTimerVariantsBwdSendWinkTimeout Send Wink Timeout
Duration of the wink signal applied by the incoming register
to signal seizure acknowledgment.
This value is expressed in milliseco… | column | Integer32 | .0.1880.1.100.300.1.400 |
| eamTimerVariantsBwdWait1stDigitTimeout Wait 1st Digit Timeout
Maximum time an incoming register waits for the first
incoming digit after the line seizure.
This value is expressed in millis… | column | Integer32 | .0.1880.1.100.300.1.500 |
| eamTimerVariantsBwdClearBackwardTimeout Clear Backward Timeout
The maximum time an incoming register waits after sending a
clear backward line signal before transiting to the idle
state.
Th… | column | Integer32 | .0.1880.1.100.300.1.600 |
| eamTimerVariantsBwdDigitCompleteTimeout Digit Complete Timeout
The maximum time the incoming register waits for the next
digit before considering the digit sequence as completed.
This value… | column | Integer32 | .0.1880.1.100.300.1.700 |
| eamTimerVariantsFwdWaitWinkTimeout Wait Wink Timeout
Maximum time an outgoing register waits for seizure
acknowledgement after seizing the line.
This value is expressed in milliseconds… | column | Integer32 | .0.1880.1.100.300.1.800 |
| eamTimerVariantsFwdWaitMaxWinkOnTimeout Wait Max Wink On Timeout
The maximum time an outgoing register waits for the seizure
acknowledgment wink to complete.
This value is expressed in mill… | column | Integer32 | .0.1880.1.100.300.1.900 |