mplsTunnelHopPathOptionName

MPLS-TE-STD-MIB · .1.3.6.1.2.1.10.166.3.2.4.1.12
MIB view Table view

Object

column r/w SNMP-FRAMEWORK-MIBSnmpAdminString 
The description of this series of hops as they
relate to the specified path option. The
value of this object SHOULD be the same for
each hop in the series that comprises a
path option.

Context

MIB
MPLS-TE-STD-MIB
OID
.1.3.6.1.2.1.10.166.3.2.4.1.12
Type
column
Access
readwrite
Status
current
Parent
mplsTunnelHopEntry
Table
mplsTunnelHopTable
Siblings
14

Syntax

SNMP-FRAMEWORK-MIBSnmpAdminString
Source
SNMP-FRAMEWORK-MIBSnmpAdminString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mplsTunnelHopListIndex
Primary index into this table identifying a particular explicit route object.
columnMPLS-TC-STD-MIBMplsPathIndex.1.3.6.1.2.1.10.166.3.2.4.1.1
mplsTunnelHopType
Denotes whether this tunnel hop is routed in a strict or loose fashion. The value of this object has no meaning if the mplsTunnelHopInclude object is set to 'false'.
columnEnumeration.1.3.6.1.2.1.10.166.3.2.4.1.10
mplsTunnelHopInclude
If this value is set to true, then this indicates that this hop must be included in the tunnel's path. If this value is set to 'false', then this hop must be avoided when calculat…
columnSNMPv2-TCTruthValue.1.3.6.1.2.1.10.166.3.2.4.1.11
mplsTunnelHopEntryPathComp
If this value is set to dynamic, then the user should only specify the source and destination of the path and expect that the CSPF will calculate the remainder of the path. If th…
columnEnumeration.1.3.6.1.2.1.10.166.3.2.4.1.13
mplsTunnelHopRowStatus
This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent ex…
columnSNMPv2-TCRowStatus.1.3.6.1.2.1.10.166.3.2.4.1.14
mplsTunnelHopStorageType
The storage type for this Hop entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
columnSNMPv2-TCStorageType.1.3.6.1.2.1.10.166.3.2.4.1.15
mplsTunnelHopPathOptionIndex
Secondary index into this table identifying a particular group of hops representing a particular configured path. This is otherwise known as a path option.
columnMPLS-TC-STD-MIBMplsPathIndex.1.3.6.1.2.1.10.166.3.2.4.1.2
mplsTunnelHopIndex
Tertiary index into this table identifying a particular hop.
columnMPLS-TC-STD-MIBMplsPathIndex.1.3.6.1.2.1.10.166.3.2.4.1.3
mplsTunnelHopAddrType
The Hop Address Type of this tunnel hop. The value of this object cannot be changed if the value of the corresponding mplsTunnelHopRowStatus object is 'active'. …
columnMPLS-TC-STD-MIBTeHopAddressType.1.3.6.1.2.1.10.166.3.2.4.1.4
mplsTunnelHopIpAddr
The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding mplsTunnelHopAddrType. The value…
columnMPLS-TC-STD-MIBTeHopAddress.1.3.6.1.2.1.10.166.3.2.4.1.5
mplsTunnelHopIpPrefixLen
If mplsTunnelHopAddrType is set to ipv4(1) or ipv6(2), then this value will contain an appropriate prefix length for the IP address in object mplsTunnelHopIpAddr. Otherwise this v…
columnINET-ADDRESS-MIBInetAddressPrefixLength.1.3.6.1.2.1.10.166.3.2.4.1.6
mplsTunnelHopAsNumber
If mplsTunnelHopAddrType is set to asnumber(3), then this value will contain the AS number of this hop. Otherwise the agent should set this object to zero- length string and the m…
columnMPLS-TC-STD-MIBTeHopAddressAS.1.3.6.1.2.1.10.166.3.2.4.1.7
mplsTunnelHopAddrUnnum
If mplsTunnelHopAddrType is set to unnum(4), then this value will contain the interface identifier of the unnumbered interface for this hop. This object should be used in conjunct…
columnMPLS-TC-STD-MIBTeHopAddressUnnum.1.3.6.1.2.1.10.166.3.2.4.1.8
mplsTunnelHopLspId
If mplsTunnelHopAddrType is set to lspid(5), then this value will contain the LSPID of a tunnel of this hop. The present tunnel being configured is tunneled through this hop (usin…
columnMPLS-TC-STD-MIBMplsLSPID.1.3.6.1.2.1.10.166.3.2.4.1.9