mplsTunnelHopTable
MPLS-TE-STD-MIB ·
.1.3.6.1.2.1.10.166.3.2.4
Object
table
The mplsTunnelHopTable is used to indicate the hops, strict or loose, for an instance of an MPLS tunnel defined in mplsTunnelTable, when it is established via signalling, for the outgoing direction of the tunnel. Thus at a transit LSR, this table contains the desired path of the tunnel from this LSR onwards. Each row in this table is indexed by mplsTunnelHopListIndex which corresponds to a group of hop lists or path options. Each row also has a secondary index mplsTunnelHopIndex, which indicates a group of hops (also known as a path option). Finally, the third index, mplsTunnelHopIndex indicates the specific hop information for a path option. In case we want to specify a particular interface on the originating LSR of an outgoing tunnel by which we want packets to exit the LSR, we specify this as the first hop for this tunnel in mplsTunnelHopTable.
Context
- MIB
- MPLS-TE-STD-MIB
- OID
.1.3.6.1.2.1.10.166.3.2.4- Type
- table
- Status
- current
- Parent
- mplsTeObjects
- Siblings
- 10
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsTunnelIndexNext This object contains an unused value for
mplsTunnelIndex, or a zero to indicate
that none exist. Negative values are not allowed,
as they do not correspond to valid val… | scalar | Unsigned32 | .1.3.6.1.2.1.10.166.3.2.1 |
| mplsTunnelCRLDPResTable The mplsTunnelCRLDPResTable allows a manager to
specify which CR-LDP-specific resources are desired
for an MPLS tunnel if that tunnel is signaled using
CR-LDP. Note that these att… | table | - | .1.3.6.1.2.1.10.166.3.2.10 |
| mplsTunnelNotificationEnable If this object is true, then it enables the
generation of mplsTunnelUp and mplsTunnelDown
traps, otherwise these traps are not emitted. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.166.3.2.11 |
| mplsTunnelTable The mplsTunnelTable allows new MPLS tunnels to be
created between an LSR and a remote endpoint, and
existing tunnels to be reconfigured or removed.
Note that only point-to-point t… | table | - | .1.3.6.1.2.1.10.166.3.2.2 |
| mplsTunnelHopListIndexNext This object contains an appropriate value to be used
for mplsTunnelHopListIndex when creating entries in
the mplsTunnelHopTable. If the number of
unassigned entries is exhausted,… | scalar | MPLS-TC-STD-MIBMplsPathIndexOrZero | .1.3.6.1.2.1.10.166.3.2.3 |
| mplsTunnelResourceIndexNext This object contains the next appropriate value to
be used for mplsTunnelResourceIndex when creating
entries in the mplsTunnelResourceTable. If the
number of unassigned entries is… | scalar | Unsigned32 | .1.3.6.1.2.1.10.166.3.2.5 |
| mplsTunnelResourceTable The mplsTunnelResourceTable allows a manager to
specify which resources are desired for an MPLS
tunnel. This table also allows several tunnels to
point to a single entry in this … | table | - | .1.3.6.1.2.1.10.166.3.2.6 |
| mplsTunnelARHopTable The mplsTunnelARHopTable is used to indicate the
hops for an MPLS tunnel defined in mplsTunnelTable,
as reported by the MPLS signalling protocol. Thus at
a transit LSR, this table… | table | - | .1.3.6.1.2.1.10.166.3.2.7 |
| mplsTunnelCHopTable The mplsTunnelCHopTable is used to indicate the
hops, strict or loose, for an MPLS tunnel defined
in mplsTunnelTable, as computed by a constraint-
based routing protocol, based on… | table | - | .1.3.6.1.2.1.10.166.3.2.8 |
| mplsTunnelPerfTable This table provides per-tunnel instance MPLS
performance information. | table | - | .1.3.6.1.2.1.10.166.3.2.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsTunnelHopEntry An entry in this table represents a tunnel hop. An
entry is created by a network administrator for
signaled ERLSP set up by an MPLS signalling
protocol. | row | - | .1.3.6.1.2.1.10.166.3.2.4.1 |