mplsOutSegmentIndexNext
MPLS-LSR-STD-MIB ·
.1.3.6.1.2.1.10.166.2.1.6
Object
scalar
MplsIndexNextType
This object contains the next available value to be used for mplsOutSegmentIndex when creating entries in the mplsOutSegmentTable. The special value of a string containing the single octet 0x00 indicates that no new entries can be created in this table. Agents not allowing managers to create entries in this table MUST set this object to this special value.
Context
- MIB
- MPLS-LSR-STD-MIB
- OID
.1.3.6.1.2.1.10.166.2.1.6- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- mplsLsrObjects
- Siblings
- 14
Syntax
MplsIndexNextType
- Source
- MplsIndexNextType
- Base type
OctetString
Values & Constraints
Type Constraints
range: 1..24
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsInterfaceTable This table specifies per-interface MPLS capability
and associated information. | table | - | .1.3.6.1.2.1.10.166.2.1.1 |
| mplsXCTable This table specifies information for switching
between LSP segments. It supports point-to-point,
point-to-multipoint and multipoint-to-point
connections. mplsLabelStackTable spe… | table | - | .1.3.6.1.2.1.10.166.2.1.10 |
| mplsMaxLabelStackDepth The maximum stack depth supported by this LSR. | scalar | Unsigned32 | .1.3.6.1.2.1.10.166.2.1.11 |
| mplsLabelStackIndexNext This object contains the next available value to
be used for mplsLabelStackIndex when creating entries
in the mplsLabelStackTable. The special string
containing the single octet 0… | scalar | MplsIndexNextType | .1.3.6.1.2.1.10.166.2.1.12 |
| mplsLabelStackTable This table specifies the label stack to be pushed
onto a packet, beneath the top label. Entries into
this table are referred to from mplsXCTable. | table | - | .1.3.6.1.2.1.10.166.2.1.13 |
| mplsInSegmentMapTable This table specifies the mapping from the
mplsInSegmentIndex to the corresponding
mplsInSegmentInterface and mplsInSegmentLabel
objects. The purpose of this table is to
provide th… | table | - | .1.3.6.1.2.1.10.166.2.1.14 |
| mplsXCNotificationsEnable If this object is set to true(1), then it enables
the emission of mplsXCUp and mplsXCDown
notifications; otherwise these notifications are not
emitted. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.166.2.1.15 |
| mplsInterfacePerfTable This table provides MPLS performance information on
a per-interface basis. | table | - | .1.3.6.1.2.1.10.166.2.1.2 |
| mplsInSegmentIndexNext This object contains the next available value to
be used for mplsInSegmentIndex when creating entries
in the mplsInSegmentTable. The special value of a
string containing the singl… | scalar | MplsIndexNextType | .1.3.6.1.2.1.10.166.2.1.3 |
| mplsInSegmentTable This table contains a description of the incoming MPLS
segments (labels) to an LSR and their associated parameters.
The index for this table is mplsInSegmentIndex.
The index struc… | table | - | .1.3.6.1.2.1.10.166.2.1.4 |
| mplsInSegmentPerfTable This table contains statistical information for
incoming MPLS segments to an LSR. | table | - | .1.3.6.1.2.1.10.166.2.1.5 |
| mplsOutSegmentTable This table contains a representation of the outgoing
segments from an LSR. | table | - | .1.3.6.1.2.1.10.166.2.1.7 |
| mplsOutSegmentPerfTable This table contains statistical information about
outgoing segments from an LSR. The counters in this
entry should behave in a manner similar to that of
the interface. | table | - | .1.3.6.1.2.1.10.166.2.1.8 |
| mplsXCIndexNext This object contains the next available value to
be used for mplsXCIndex when creating entries in
the mplsXCTable. A special value of the zero length
string indicates that no more… | scalar | MplsIndexNextType | .1.3.6.1.2.1.10.166.2.1.9 |