MPLS-LSR-STD-MIB Table View

This table specifies per-interface MPLS capability
and associated information.

mplsInterfaceEntry row .1.3.6.1.2.1.10.166.2.1.1.1

A conceptual row in this table is created
automatically by an LSR for every interface capable
of supporting MPLS and which is configured to do so.
A conceptual row in this table will exist if and only if
a corresponding…

Indexes

mplsInterfaceIndex

Column	Syntax	OID
mplsInterfaceIndex This is a unique index for an entry in the MplsInterfaceTable. A non-zero index for an entry indicates the ifIndex for the corresponding interface entry of the MPLS-layer in the ifTable. The entry with index 0 represen…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.2.1.10.166.2.1.1.1.1
mplsInterfaceLabelMinIn This is the minimum value of an MPLS label that this LSR is willing to receive on this interface.	MPLS-TC-STD-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.1.1.2
mplsInterfaceLabelMaxIn This is the maximum value of an MPLS label that this LSR is willing to receive on this interface.	MPLS-TC-STD-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.1.1.3
mplsInterfaceLabelMinOut This is the minimum value of an MPLS label that this LSR is willing to send on this interface.	MPLS-TC-STD-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.1.1.4
mplsInterfaceLabelMaxOut This is the maximum value of an MPLS label that this LSR is willing to send on this interface.	MPLS-TC-STD-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.1.1.5
mplsInterfaceTotalBandwidth This value indicates the total amount of usable bandwidth on this interface and is specified in kilobits per second (Kbps). This variable is not applicable when applied to the interface with index 0. When this value ca…	kilobits per secondMPLS-TC-STD-MIBMplsBitRate Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.1.1.6
mplsInterfaceAvailableBandwidth This value indicates the total amount of available bandwidth available on this interface and is specified in kilobits per second (Kbps). This value is calculated as the difference between the amount of bandwidth curren…	MPLS-TC-STD-MIBMplsBitRate Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.1.1.7
mplsInterfaceLabelParticipationType If the value of the mplsInterfaceIndex for this entry is zero, then this entry corresponds to the per-platform label space for all interfaces configured to use that label space. In this case the perPlatform(0) bit MUST …	Bits Enumerated Values: 0 perPlatform 1 perInterface	.1.3.6.1.2.1.10.166.2.1.1.1.8

This table provides MPLS performance information on
a per-interface basis.

mplsInterfacePerfEntry row .1.3.6.1.2.1.10.166.2.1.2.1

An entry in this table is created by the LSR for
every interface capable of supporting MPLS. Its is
an extension to the mplsInterfaceEntry table.
Note that the discontinuity behavior of entries in
this table MUST be ba…

Indexes

No indexes recorded

Column	Syntax	OID
mplsInterfacePerfInLabelsInUse This object counts the number of labels that are in use at this point in time on this interface in the incoming direction. If the interface participates in only the per-platform label space, then the value of the instan…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.2.1.1
mplsInterfacePerfInLabelLookupFailures This object counts the number of labeled packets that have been received on this interface and which were discarded because there was no matching cross- connect entry. This object MUST count on a per- interface basis re…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.2.1.2
mplsInterfacePerfOutLabelsInUse This object counts the number of top-most labels in the outgoing label stacks that are in use at this point in time on this interface. This object MUST count on a per-interface basis regardless of which label space the …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.2.1.3
mplsInterfacePerfOutFragmentedPkts This object counts the number of outgoing MPLS packets that required fragmentation before transmission on this interface. This object MUST count on a per-interface basis regardless of which label space the interface par…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.2.1.4

This table contains a description of the incoming MPLS
segments (labels) to an LSR and their associated parameters.
The index for this table is mplsInSegmentIndex.
The index structure of this table is specifically designed
to handle many different MPLS implementations that manage
their labels both in a distributed and centralized manner.
The table is also designed to handle existing MPLS labels
as defined in RFC3031 as well as longer ones that may
be necessary in the future.
          
In cases where the label cannot fit into the
mplsInSegmentLabel object, the mplsInSegmentLabelPtr
will indicate this by being set to the first accessible
column in the appropriate extension table's row.
In this case an additional table MUST
be provided and MUST be indexed by at least the indexes
used by this table. In all other cases when the label is
represented within the mplsInSegmentLabel object, the
mplsInSegmentLabelPtr MUST be set to 0.0. Due to the
fact that MPLS labels may not exceed 24 bits, the
mplsInSegmentLabelPtr object is only a provision for
future-proofing the MIB module. Thus, the definition
of any extension tables is beyond the scope of this
MIB module.

mplsInSegmentEntry row .1.3.6.1.2.1.10.166.2.1.4.1

An entry in this table represents one incoming
segment as is represented in an LSR's LFIB.
An entry can be created by a network
administrator or an SNMP agent, or an MPLS signaling
protocol. The creator of the entry is…

Indexes

mplsInSegmentIndex

Column	Syntax	OID
mplsInSegmentIndex The index for this in-segment. The string containing the single octet 0x00 MUST not be used as an index.	MplsIndexType Type Constraints: range: 1..24	.1.3.6.1.2.1.10.166.2.1.4.1.1
mplsInSegmentInterface This object represents the interface index for the incoming MPLS interface. A value of zero represents all interfaces participating in the per-platform label space. This may only be used in cases where the incoming in…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.2.1.10.166.2.1.4.1.2
mplsInSegmentLabel If the corresponding instance of mplsInSegmentLabelPtr is zeroDotZero then this object MUST contain the incoming label associated with this in-segment. If not this object SHOULD be zero and MUST be ignored.	MPLS-TC-STD-MIBMplsLabelr/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.4.1.3
mplsInSegmentLabelPtr If the label for this segment cannot be represented fully within the mplsInSegmentLabel object, this object MUST point to the first accessible column of a conceptual row in an external table containing the label. In th…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.10.166.2.1.4.1.4
mplsInSegmentNPop The number of labels to pop from the incoming packet. Normally only the top label is popped from the packet and used for all switching decisions for that packet. This is indicated by setting this object to the default…	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.2.1.10.166.2.1.4.1.5
mplsInSegmentAddrFamily The IANA address family [IANAFamily] of packets received on this segment, which is used at an egress LSR to deliver them to the appropriate layer 3 entity. A value of other(0) indicates that the family type is either un…	IANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbersr/w Type Values: 0 other 1 ipV4 2 ipV6 3 nsap 4 hdlc 5 bbn1822 6 all802 7 e163 8 e164 9 f69 10 x121 11 ipx 12 appleTalk 13 decnetIV 14 banyanVines 15 e164withNsap 16 dns 17 distinguishedName 18 asNumber 19 xtpOverIpv4 20 xtpOverIpv6 21 xtpNativeModeXTP 22 fibreChannelWWPN 23 fibreChannelWWNN 24 gwid 25 afi 26 mplsTpSectionEndpointIdentifier 27 mplsTpLspEndpointIdentifier 28 mplsTpPseudowireEndpointIdentifier 29 mtipmultitopologyipversion4 30 mtipv6multitopologyipversion6 31 bgpSfc 16384 eigrpCommonServiceFamily 16385 eigrpIpv4ServiceFamily 16386 eigrpIpv6ServiceFamily 16387 lispCanonicalAddressFormat 16388 bgpLs 16389 fortyeightBitMac 16390 sixtyfourBitMac 16391 oui 16392 mac24 16393 mac40 16394 ipv664 16395 rBridgePortID 16396 trillNickname 16397 universallyUniqueIdentifier 16398 routingPolicyAfi 16399 mplsNamespaces 65535 reserved	.1.3.6.1.2.1.10.166.2.1.4.1.6
mplsInSegmentXCIndex Index into mplsXCTable which identifies which cross- connect entry this segment is part of. The string containing the single octet 0x00 indicates that this entry is not referred to by any cross-connect entry. When a cr…	MplsIndexType Type Constraints: range: 1..24	.1.3.6.1.2.1.10.166.2.1.4.1.7
mplsInSegmentOwner Denotes the entity that created and is responsible for managing this segment.	MPLS-TC-STD-MIBMplsOwner Type Values: 1 unknown 2 other 3 snmp 4 ldp 5 crldp 6 rsvpTe 7 policyAgent	.1.3.6.1.2.1.10.166.2.1.4.1.8
mplsInSegmentTrafficParamPtr This variable represents a pointer to the traffic parameter specification for this in-segment. This value may point at an entry in the mplsTunnelResourceTable in the MPLS-TE-STD-MIB (RFC3812) to indicate which traffic …	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.10.166.2.1.4.1.9
mplsInSegmentRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row can be modified except the mplsInSegmentRowStatus and mplsInS…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.166.2.1.4.1.10
mplsInSegmentStorageType This variable indicates the storage type for this object. The agent MUST ensure that this object's value remains consistent with the associated mplsXCEntry. Conceptual rows having the value 'permanent' need not allow wr…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.166.2.1.4.1.11

This table contains statistical information for
incoming MPLS segments to an LSR.

mplsInSegmentPerfEntry row .1.3.6.1.2.1.10.166.2.1.5.1

An entry in this table contains statistical
information about one incoming segment which is
configured in the mplsInSegmentTable. The counters
in this entry should behave in a manner similar to
that of the interface.
mp…

Indexes

No indexes recorded

Column	Syntax	OID
mplsInSegmentPerfOctets This value represents the total number of octets received by this segment. It MUST be equal to the least significant 32 bits of mplsInSegmentPerfHCOctets if mplsInSegmentPerfHCOctets is supported according to the rules …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.5.1.1
mplsInSegmentPerfPackets Total number of packets received by this segment.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.5.1.2
mplsInSegmentPerfErrors The number of errored packets received on this segment.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.5.1.3
mplsInSegmentPerfDiscards The number of labeled packets received on this in- segment, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a labele…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.5.1.4
mplsInSegmentPerfHCOctets The total number of octets received. This is the 64 bit version of mplsInSegmentPerfOctets, if mplsInSegmentPerfHCOctets is supported according to the rules spelled out in RFC2863.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.166.2.1.5.1.5
mplsInSegmentPerfDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization o…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.166.2.1.5.1.6

This table contains a representation of the outgoing
segments from an LSR.

mplsOutSegmentEntry row .1.3.6.1.2.1.10.166.2.1.7.1

An entry in this table represents one outgoing

segment. An entry can be created by a network
administrator, an SNMP agent, or an MPLS signaling
protocol. The object mplsOutSegmentOwner indicates
the creat…

Indexes

mplsOutSegmentIndex

Column	Syntax	OID
mplsOutSegmentIndex This value contains a unique index for this row. While a value of a string containing the single octet 0x00 is not valid as an index for entries in this table, it can be supplied as a valid value to index the mplsXCTabl…	MplsIndexType Type Constraints: range: 1..24	.1.3.6.1.2.1.10.166.2.1.7.1.1
mplsOutSegmentInterface This value must contain the interface index of the outgoing interface. This object cannot be modified if mplsOutSegmentRowStatus is active(1). The mplsOutSegmentRowStatus cannot be set to active(1) until this object is …	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.2.1.10.166.2.1.7.1.2
mplsOutSegmentPushTopLabel This value indicates whether or not a top label should be pushed onto the outgoing packet's label stack. The value of this variable MUST be set to true(1) if the outgoing interface does not support pop-and-go (and no l…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.166.2.1.7.1.3
mplsOutSegmentTopLabel If mplsOutSegmentPushTopLabel is true then this represents the label that should be pushed onto the top of the outgoing packet's label stack. Otherwise this value SHOULD be set to 0 by the management station and MUST be…	MPLS-TC-STD-MIBMplsLabelr/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.7.1.4
mplsOutSegmentTopLabelPtr If the label for this segment cannot be represented fully within the mplsOutSegmentLabel object, this object MUST point to the first accessible column of a conceptual row in an external table containing the label. In t…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.10.166.2.1.7.1.5
mplsOutSegmentNextHopAddrType Indicates the next hop Internet address type. Only values unknown(0), ipv4(1) or ipv6(2) have to be supported. A value of unknown(0) is allowed only when the outgoing interface is of type point-to-point. …	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.10.166.2.1.7.1.6
mplsOutSegmentNextHopAddr The internet address of the next hop. The type of this address is determined by the value of the mplslOutSegmentNextHopAddrType object. This object cannot be modified if mplsOutSegmentRowSt…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.10.166.2.1.7.1.7
mplsOutSegmentXCIndex Index into mplsXCTable which identifies which cross- connect entry this segment is part of. A value of the string containing the single octet 0x00 indicates that this entry is not referred to by any cross-connect entry…	MplsIndexType Type Constraints: range: 1..24	.1.3.6.1.2.1.10.166.2.1.7.1.8
mplsOutSegmentOwner Denotes the entity which created and is responsible for managing this segment.	MPLS-TC-STD-MIBMplsOwner Type Values: 1 unknown 2 other 3 snmp 4 ldp 5 crldp 6 rsvpTe 7 policyAgent	.1.3.6.1.2.1.10.166.2.1.7.1.9
mplsOutSegmentTrafficParamPtr This variable represents a pointer to the traffic parameter specification for this out-segment. This value may point at an entry in the MplsTunnelResourceEntry in the MPLS-TE-STD-MIB (RFC3812) RFC Editor…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.10.166.2.1.7.1.10
mplsOutSegmentRowStatus For creating, modifying, and deleting this row. When a row in this table has a row in the active(1) state, no objects in this row can be modified except the mplsOutSegmentRowStatus or mplsOutSegmentStorageType.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.166.2.1.7.1.11
mplsOutSegmentStorageType This variable indicates the storage type for this object. The agent MUST ensure that this object's value remains consistent with the associated mplsXCEntry. Conceptual rows having the value 'permanent' need not allow wr…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.166.2.1.7.1.12

This table contains statistical information about
          
outgoing segments from an LSR. The counters in this
entry should behave in a manner similar to that of
the interface.

mplsOutSegmentPerfEntry row .1.3.6.1.2.1.10.166.2.1.8.1

An entry in this table contains statistical
information about one outgoing segment configured in
mplsOutSegmentTable. The object
mplsOutSegmentPerfDiscontinuityTime indicates the
time of the last discontinuity in these …

Indexes

No indexes recorded

Column	Syntax	OID
mplsOutSegmentPerfOctets This value contains the total number of octets sent on this segment. It MUST be equal to the least significant 32 bits of mplsOutSegmentPerfHCOctets if mplsOutSegmentPerfHCOctets is supported according to the rules spel…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.8.1.1
mplsOutSegmentPerfPackets This value contains the total number of packets sent on this segment.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.8.1.2
mplsOutSegmentPerfErrors Number of packets that could not be sent due to errors on this segment.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.8.1.3
mplsOutSegmentPerfDiscards The number of labeled packets attempted to be transmitted on this out-segment, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discar…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.8.1.4
mplsOutSegmentPerfHCOctets Total number of octets sent. This is the 64 bit version of mplsOutSegmentPerfOctets, if mplsOutSegmentPerfHCOctets is supported according to the rules spelled out in RFC2863.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.166.2.1.8.1.5
mplsOutSegmentPerfDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization o…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.166.2.1.8.1.6

This table specifies information for switching
between LSP segments.  It supports point-to-point,
point-to-multipoint and multipoint-to-point
connections.  mplsLabelStackTable specifies the
label stack information for a cross-connect LSR and
is referred to from mplsXCTable.

mplsXCEntry row .1.3.6.1.2.1.10.166.2.1.10.1

A row in this table represents one cross-connect
entry. It is indexed by the following objects:

- cross-connect index mplsXCIndex that uniquely
identifies a group of cross-connect entries

- …

Indexes

mplsXCIndex mplsXCInSegmentIndex mplsXCOutSegmentIndex

Column	Syntax	OID
mplsXCIndex Primary index for the conceptual row identifying a group of cross-connect segments. The string containing a single octet 0x00 is an invalid index.	MplsIndexType Type Constraints: range: 1..24	.1.3.6.1.2.1.10.166.2.1.10.1.1
mplsXCInSegmentIndex Incoming label index. If this object is set to the string containing a single octet 0x00, this indicates a special case outlined in the table's description above. In this case no corresponding mplsInSegmentEntry shall e…	MplsIndexType Type Constraints: range: 1..24	.1.3.6.1.2.1.10.166.2.1.10.1.2
mplsXCOutSegmentIndex Index of out-segment for LSPs not terminating on this LSR if not set to the string containing the single octet 0x00. If the segment identified by this entry is terminating, then this object MUST be set to the string con…	MplsIndexType Type Constraints: range: 1..24	.1.3.6.1.2.1.10.166.2.1.10.1.3
mplsXCLspId This value identifies the label switched path that this cross-connect entry belongs to. This object cannot be modified if mplsXCRowStatus is active(1) except for this object.	MPLS-TC-STD-MIBMplsLSPIDr/w Type Constraints: range: 2 range: 6	.1.3.6.1.2.1.10.166.2.1.10.1.4
mplsXCLabelStackIndex Primary index into mplsLabelStackTable identifying a stack of labels to be pushed beneath the top label. Note that the top label identified by the out- segment ensures that all the components of a multipoint-to-point co…	MplsIndexTyper/w Type Constraints: range: 1..24	.1.3.6.1.2.1.10.166.2.1.10.1.5
mplsXCOwner Denotes the entity that created and is responsible for managing this cross-connect.	MPLS-TC-STD-MIBMplsOwner Type Values: 1 unknown 2 other 3 snmp 4 ldp 5 crldp 6 rsvpTe 7 policyAgent	.1.3.6.1.2.1.10.166.2.1.10.1.6
mplsXCRowStatus For creating, modifying, and deleting this row. When a row in this table has a row in the active(1) state, no objects in this row except this object and the mplsXCStorageType can be modified.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.166.2.1.10.1.7
mplsXCStorageType This variable indicates the storage type for this object. The agent MUST ensure that the associated in and out segments also have the same StorageType value and are restored consistently upon system restart. This value …	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.166.2.1.10.1.8
mplsXCAdminStatus The desired operational status of this segment.	Enumerationr/w Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.2.1.10.166.2.1.10.1.9
mplsXCOperStatus The actual operational status of this cross- connect.	Enumeration Enumerated Values: 1 up 2 down 3 testing 4 unknown 5 dormant 6 notPresent 7 lowerLayerDown	.1.3.6.1.2.1.10.166.2.1.10.1.10

This table specifies the label stack to be pushed
onto a packet, beneath the top label.  Entries into
this table are referred to from mplsXCTable.

mplsLabelStackEntry row .1.3.6.1.2.1.10.166.2.1.13.1

An entry in this table represents one label which is
to be pushed onto an outgoing packet, beneath the
top label. An entry can be created by a network
administrator or by an SNMP agent as instructed by
an MPLS signalin…

Indexes

mplsLabelStackIndex mplsLabelStackLabelIndex

Column	Syntax	OID
mplsLabelStackIndex Primary index for this row identifying a stack of labels to be pushed on an outgoing packet, beneath the top label. An index containing the string with a single octet 0x00 MUST not be used.	MplsIndexType Type Constraints: range: 1..24	.1.3.6.1.2.1.10.166.2.1.13.1.1
mplsLabelStackLabelIndex Secondary index for this row identifying one label of the stack. Note that an entry with a smaller mplsLabelStackLabelIndex would refer to a label higher up the label stack and would be popped at a downstream LSR befor…	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.10.166.2.1.13.1.2
mplsLabelStackLabel The label to pushed.	MPLS-TC-STD-MIBMplsLabelr/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.13.1.3
mplsLabelStackLabelPtr If the label for this segment cannot be represented fully within the mplsLabelStackLabel object, this object MUST point to the first accessible column of a conceptual row in an external table containing the label. In t…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.10.166.2.1.13.1.4
mplsLabelStackRowStatus For creating, modifying, and deleting this row. When a row in this table has a row in the active(1) state, no objects in this row except this object and the mplsLabelStackStorageType can be modified.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.166.2.1.13.1.5
mplsLabelStackStorageType This variable indicates the storage type for this object. This object cannot be modified if mplsLabelStackRowStatus is active(1). No objects are required to be writable for rows in this table with this object set to per…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.166.2.1.13.1.6

This table specifies the mapping from the
mplsInSegmentIndex to the corresponding
mplsInSegmentInterface and mplsInSegmentLabel
objects. The purpose of this table is to
provide the manager with an alternative
means by which to locate in-segments.

mplsInSegmentMapEntry row .1.3.6.1.2.1.10.166.2.1.14.1

An entry in this table represents one interface
and incoming label pair.

In cases where the label cannot fit into the
mplsInSegmentLabel object, the mplsInSegmentLabelPtr
will indicate this by being set to …

Indexes

mplsInSegmentMapInterface mplsInSegmentMapLabel mplsInSegmentMapLabelPtrIndex

Column	Syntax	OID
mplsInSegmentMapInterface This index contains the same value as the mplsInSegmentIndex in the mplsInSegmentTable.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.2.1.10.166.2.1.14.1.1
mplsInSegmentMapLabel This index contains the same value as the mplsInSegmentLabel in the mplsInSegmentTable.	MPLS-TC-STD-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.2.1.14.1.2
mplsInSegmentMapLabelPtrIndex This index contains the same value as the mplsInSegmentLabelPtr. If the label for the InSegment cannot be represented fully within the mplsInSegmentLabel object, this index MUST point to the first accessi…	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.10.166.2.1.14.1.3
mplsInSegmentMapIndex The mplsInSegmentIndex that corresponds to the mplsInSegmentInterface and mplsInSegmentLabel, or the mplsInSegmentInterface and mplsInSegmentLabelPtr, if applicable. The string containing the single octet 0x00 MUST not …	MplsIndexType Type Constraints: range: 1..24	.1.3.6.1.2.1.10.166.2.1.14.1.4