mplsL3VpnVrfNumVrfRouteMaxThreshExceeded
MPLS-L3VPN-STD-MIB ·
.1.3.6.1.2.1.10.166.11.0.4
Object
notification
This notification is generated when the number of routes
contained by the specified VRF exceeds or attempts to exceed
the maximum allowed value as indicated by
mplsL3VpnVrfMaxRouteThreshold. In cases where
mplsL3VpnVrfConfHighRteThresh is set to the same value
as mplsL3VpnVrfConfMaxRoutes, mplsL3VpnVrfConfHighRteThresh
need not be exceeded; rather, just reached for this notification
to be issued.
Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval
at which the this notification will be reissued after the
maximum value has been exceeded (or reached if
mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are
equal) and the initial notification has been issued. This value
is intended to prevent continuous generation of notifications by
an agent in the event that routes are continually added to a VRF
after it has reached its maximum value. The default value is 0
minutes. If this value is set to 0, the agent should only issue
a single notification at the time that the maximum threshold has
been reached, and should not issue any more notifications until
the value of routes has fallen below the configured threshold
value.
Context
- MIB
- MPLS-L3VPN-STD-MIB
- OID
.1.3.6.1.2.1.10.166.11.0.4- Type
- notification
- Status
- current
- Parent
- mplsL3VpnNotifications
- Siblings
- 5
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsL3VpnVrfUp This notification is generated when:
a. No interface is associated with this VRF, and the first
(and only first) interface associated with it has its
ifOperStatus change to … | notification | - | .1.3.6.1.2.1.10.166.11.0.1 |
| mplsL3VpnVrfDown This notification is generated when:
a. One interface is associated with this VRF, and
the ifOperStatus of this interface changes from up(1)
to down(2).
b. Multip… | notification | - | .1.3.6.1.2.1.10.166.11.0.2 |
| mplsL3VpnVrfRouteMidThreshExceeded This notification is generated when the number of routes
contained by the specified VRF exceeds the value indicated by
mplsL3VpnVrfMidRouteThreshold. A single notification MUST b… | notification | - | .1.3.6.1.2.1.10.166.11.0.3 |
| mplsL3VpnNumVrfSecIllglLblThrshExcd This notification is generated when the number of illegal
label violations on a VRF as indicated by
mplsL3VpnVrfSecIllegalLblVltns has exceeded
mplsL3VpnIllLblRcvThrsh.… | notification | - | .1.3.6.1.2.1.10.166.11.0.5 |
| mplsL3VpnNumVrfRouteMaxThreshCleared This notification is generated only after the number of routes
contained by the specified VRF exceeds or attempts to exceed
the maximum allowed value as indicated by
mplsVrfMaxRou… | notification | - | .1.3.6.1.2.1.10.166.11.0.6 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsL3VpnVrfPerfCurrNumRoutes Indicates the number of routes currently used by this
VRF. | column | SNMPv2-SMIGauge32 | .1.3.6.1.2.1.10.166.11.1.3.1.1.3 |
| mplsL3VpnVrfConfHighRteThresh Denotes high-level water marker for the number of
routes that this VRF may hold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.166.11.1.2.2.1.10 |