MPLS-L3VPN-STD-MIB Table View

This table specifies per-interface MPLS capability
and associated information.

mplsL3VpnIfConfEntry row .1.3.6.1.2.1.10.166.11.1.2.1.1

An entry in this table is created by an LSR for
every interface capable of supporting MPLS L3VPN.
Each entry in this table is meant to correspond to
an entry in the Interfaces Table.

Indexes

mplsL3VpnVrfName mplsL3VpnIfConfIndex

Column	Syntax	OID
mplsL3VpnIfConfIndex This is a unique index for an entry in the mplsL3VpnIfConfTable. A non-zero index for an entry indicates the ifIndex for the corresponding interface entry in the MPLS-VPN-layer in the ifTable. Note that this table does…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.10.166.11.1.2.1.1.1
mplsL3VpnIfVpnClassification Denotes whether this link participates in a carrier's carrier, enterprise, or inter-provider scenario.	Enumerationr/w Enumerated Values: 1 carrierOfCarrier 2 enterprise 3 interProvider	.1.3.6.1.2.1.10.166.11.1.2.1.1.2
mplsL3VpnIfVpnRouteDistProtocol Denotes the route distribution protocol across the PE-CE link. Note that more than one routing protocol may be enabled at the same time; thus, this object is specified as a bitmask. For example, static(5) and ospf(2) …	Bitsr/w Enumerated Values: 0 none 1 bgp 2 ospf 3 rip 4 isis 5 static 6 other	.1.3.6.1.2.1.10.166.11.1.2.1.1.3
mplsL3VpnIfConfStorageType The storage type for this VPN If entry. Conceptual rows having the value 'permanent' need not allow write access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.166.11.1.2.1.1.4
mplsL3VpnIfConfRowStatus This variable is used to create, modify, and/or delete a row in this table. Rows in this table signify that the specified interface is associated with this VRF. If the row creation operation succeeds, the interface wi…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.166.11.1.2.1.1.5

This table specifies per-interface MPLS L3VPN
VRF Table capability and associated information.
Entries in this table define VRF routing instances
associated with MPLS/VPN interfaces.  Note that
multiple interfaces can belong to the same VRF
instance.  The collection of all VRF instances
comprises an actual VPN.

mplsL3VpnVrfEntry row .1.3.6.1.2.1.10.166.11.1.2.2.1

An entry in this table is created by an LSR for
every VRF capable of supporting MPLS L3VPN. The
indexing provides an ordering of VRFs per-VPN
interface.

Indexes

mplsL3VpnVrfName

Column	Syntax	OID
mplsL3VpnVrfName The human-readable name of this VPN. This MAY be equivalent to the [RFC2685] VPN-ID, but may also vary. If it is set to the VPN ID, it MUST be equivalent to the value of mplsL3VpnVrfVpnId. It is strongly recommended t…	MplsL3VpnName Type Constraints: range: 0..31	.1.3.6.1.2.1.10.166.11.1.2.2.1.1
mplsL3VpnVrfVpnId The VPN ID as specified in [RFC2685]. If a VPN ID has not been specified for this VRF, then this variable SHOULD be set to a zero-length OCTET STRING.	VPN-TC-STD-MIBVPNIdOrZeror/w Type Constraints: range: 0 range: 7	.1.3.6.1.2.1.10.166.11.1.2.2.1.2
mplsL3VpnVrfDescription The human-readable description of this VRF.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.10.166.11.1.2.2.1.3
mplsL3VpnVrfRD The route distinguisher for this VRF.	MplsL3VpnRouteDistinguisherr/w Type Constraints: range: 0..256	.1.3.6.1.2.1.10.166.11.1.2.2.1.4
mplsL3VpnVrfCreationTime The time at which this VRF entry was created.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.166.11.1.2.2.1.5
mplsL3VpnVrfOperStatus Denotes whether or not a VRF is operational. A VRF is up(1) when there is at least one interface associated with the VRF whose ifOperStatus is up(1). A VRF is down(2) when: a. There does not exist at least one interfa…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.2.1.10.166.11.1.2.2.1.6
mplsL3VpnVrfActiveInterfaces Total number of interfaces connected to this VRF with ifOperStatus = up(1). This value should increase when an interface is associated with the corresponding VRF and its corresponding ifOperStatus is equa…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.11.1.2.2.1.7
mplsL3VpnVrfAssociatedInterfaces Total number of interfaces connected to this VRF (independent of ifOperStatus type).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.11.1.2.2.1.8
mplsL3VpnVrfConfMidRteThresh Denotes mid-level water marker for the number of routes that this VRF may hold.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.11.1.2.2.1.9
mplsL3VpnVrfConfHighRteThresh Denotes high-level water marker for the number of routes that this VRF may hold.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.11.1.2.2.1.10
mplsL3VpnVrfConfMaxRoutes Denotes maximum number of routes that this VRF is configured to hold. This value MUST be less than or equal to mplsL3VpnVrfConfMaxPossRts unless it is set to 0.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.11.1.2.2.1.11
mplsL3VpnVrfConfLastChanged The value of sysUpTime at the time of the last change of this table entry, which includes changes of VRF parameters defined in this table or addition or deletion of interfaces associated with this VRF.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.166.11.1.2.2.1.12
mplsL3VpnVrfConfRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except mplsL3VpnVrfConfAdminStatus, mplsL…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.166.11.1.2.2.1.13
mplsL3VpnVrfConfAdminStatus Indicates the desired operational status of this VRF.	Enumerationr/w Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.2.1.10.166.11.1.2.2.1.14
mplsL3VpnVrfConfStorageType The storage type for this VPN VRF entry. Conceptual rows having the value 'permanent' need not allow write access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.166.11.1.2.2.1.15

This table specifies per-VRF route target association.
Each entry identifies a connectivity policy supported
as part of a VPN.

mplsL3VpnVrfRTEntry row .1.3.6.1.2.1.10.166.11.1.2.3.1

An entry in this table is created by an LSR for
each route target configured for a VRF supporting
a MPLS L3VPN instance. The indexing provides an
ordering per-VRF instance. See [RFC4364] for a
complete definition of a…

Indexes

mplsL3VpnVrfName mplsL3VpnVrfRTIndex mplsL3VpnVrfRTType

Column	Syntax	OID
mplsL3VpnVrfRTIndex Auxiliary index for route targets configured for a particular VRF.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.10.166.11.1.2.3.1.2
mplsL3VpnVrfRTType The route target distribution type.	MplsL3VpnRtType Type Values: 1 import 2 export 3 both	.1.3.6.1.2.1.10.166.11.1.2.3.1.3
mplsL3VpnVrfRT The route target distribution policy.	MplsL3VpnRouteDistinguisherr/w Type Constraints: range: 0..256	.1.3.6.1.2.1.10.166.11.1.2.3.1.4
mplsL3VpnVrfRTDescr Description of the route target.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.10.166.11.1.2.3.1.5
mplsL3VpnVrfRTRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except mplsL3VpnVrfRTRowStatus.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.166.11.1.2.3.1.6
mplsL3VpnVrfRTStorageType The storage type for this VPN route target (RT) entry. Conceptual rows having the value 'permanent' need not allow write access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.166.11.1.2.3.1.7

This table specifies per MPLS L3VPN VRF Table
security-related counters.

mplsL3VpnVrfSecEntry row .1.3.6.1.2.1.10.166.11.1.2.6.1

An entry in this table is created by an LSR for
every VRF capable of supporting MPLS L3VPN. Each
entry in this table is used to indicate security-related
information for each VRF entry.

Indexes

No indexes recorded

Column	Syntax	OID
mplsL3VpnVrfSecIllegalLblVltns Indicates the number of illegally received labels on this VPN/VRF. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.11.1.2.6.1.1
mplsL3VpnVrfSecDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local mana…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.166.11.1.2.6.1.2

This table specifies per MPLS L3VPN VRF Table performance
          
information.

mplsL3VpnVrfPerfEntry row .1.3.6.1.2.1.10.166.11.1.3.1.1

An entry in this table is created by an LSR for
every VRF capable of supporting MPLS L3VPN.

Indexes

No indexes recorded

Column	Syntax	OID
mplsL3VpnVrfPerfRoutesAdded Indicates the number of routes added to this VPN/VRF since the last discontinuity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated b…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.11.1.3.1.1.1
mplsL3VpnVrfPerfRoutesDeleted Indicates the number of routes removed from this VPN/VRF. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.11.1.3.1.1.2
mplsL3VpnVrfPerfCurrNumRoutes Indicates the number of routes currently used by this VRF.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.11.1.3.1.1.3
mplsL3VpnVrfPerfRoutesDropped This counter should be incremented when the number of routes contained by the specified VRF exceeds or attempts to exceed the maximum allowed value as indicated by mplsL3VpnVrfMaxRouteThreshold. Discontin…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.11.1.3.1.1.4
mplsL3VpnVrfPerfDiscTime The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local mana…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.166.11.1.3.1.1.5

This table specifies per-interface MPLS L3VPN VRF Table
routing information.  Entries in this table define VRF routing
entries associated with the specified MPLS/VPN interfaces.  Note
          
that this table contains both BGP and Interior Gateway Protocol
IGP routes, as both may appear in the same VRF.

mplsL3VpnVrfRteEntry row .1.3.6.1.2.1.10.166.11.1.4.1.1

An entry in this table is created by an LSR for every route
present configured (either dynamically or statically) within
the context of a specific VRF capable of supporting MPLS/BGP
VPN. The indexing provides an orderi…

Indexes

mplsL3VpnVrfName mplsL3VpnVrfRteInetCidrDestType mplsL3VpnVrfRteInetCidrDest mplsL3VpnVrfRteInetCidrPfxLen mplsL3VpnVrfRteInetCidrPolicy mplsL3VpnVrfRteInetCidrNHopType mplsL3VpnVrfRteInetCidrNextHop

Column	Syntax	OID
mplsL3VpnVrfRteInetCidrDestType The type of the mplsL3VpnVrfRteInetCidrDest address, as defined in the InetAddress MIB. Only those address types that may appear in an actual routing table are allowed as values of this object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.10.166.11.1.4.1.1.1
mplsL3VpnVrfRteInetCidrDest The destination IP address of this route. The type of this address is determined by the value of the mplsL3VpnVrfRteInetCidrDestType object. The values for the index objects mplsL3VpnVrfRte…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.2.1.10.166.11.1.4.1.1.2
mplsL3VpnVrfRteInetCidrPfxLen Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the mplsL3VpnVrfRteInetCidrDest field. The…	Unsigned32 Constraints: range: 0-128	.1.3.6.1.2.1.10.166.11.1.4.1.1.3
mplsL3VpnVrfRteInetCidrPolicy This object is an opaque object without any defined semantics. Its purpose is to serve as an additional index that may delineate between multiple entries to the same destination. The value { 0 0 } shall be used as the…	ObjectIdentifier	.1.3.6.1.2.1.10.166.11.1.4.1.1.4
mplsL3VpnVrfRteInetCidrNHopType The type of the mplsL3VpnVrfRteInetCidrNextHop address, as defined in the InetAddress MIB. Value should be set to unknown(0) for non-remote routes. Only those address types that may appear …	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.10.166.11.1.4.1.1.5
mplsL3VpnVrfRteInetCidrNextHop On remote routes, the address of the next system en route. For non-remote routes, a zero-length string. The type of this address is determined by the value of the mplsL3VpnVrfRteInetCidrNHopType object.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.2.1.10.166.11.1.4.1.1.6
mplsL3VpnVrfRteInetCidrIfIndex The ifIndex value that identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scenario where no interface is specified.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.2.1.10.166.11.1.4.1.1.7
mplsL3VpnVrfRteInetCidrType The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destination. Routes that do no…	Enumerationr/w Enumerated Values: 1 other 2 reject 3 local 4 remote 5 blackhole	.1.3.6.1.2.1.10.166.11.1.4.1.1.8
mplsL3VpnVrfRteInetCidrProto The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.	IANA-RTPROTO-MIBIANAipRouteProtocol Type Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isIs 10 esIs 11 ciscoIgrp 12 bbnSpfIgp 13 ospf 14 bgp 15 idpr 16 ciscoEigrp 17 dvmrp 18 rpl 19 dhcp 20 ttdp	.1.3.6.1.2.1.10.166.11.1.4.1.1.9
mplsL3VpnVrfRteInetCidrAge The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied except through knowledge of the routing protocol by which the route was …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.11.1.4.1.1.10
mplsL3VpnVrfRteInetCidrNextHopAS The Autonomous System Number of the next hop. The semantics of this object are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value. When this object is unknown or not relevan…	INET-ADDRESS-MIBInetAutonomousSystemNumberr/w	.1.3.6.1.2.1.10.166.11.1.4.1.1.11
mplsL3VpnVrfRteInetCidrMetric1 The primary routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value. If this metric is not used, it…	Integer32r/w Constraints: range: -1-2147483647	.1.3.6.1.2.1.10.166.11.1.4.1.1.12
mplsL3VpnVrfRteInetCidrMetric2 An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value. If this metric is not used, its value should…	Integer32r/w Constraints: range: -1-2147483647	.1.3.6.1.2.1.10.166.11.1.4.1.1.13
mplsL3VpnVrfRteInetCidrMetric3 An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value. If this metric is not used, its value should…	Integer32r/w Constraints: range: -1-2147483647	.1.3.6.1.2.1.10.166.11.1.4.1.1.14
mplsL3VpnVrfRteInetCidrMetric4 An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value. If this metric is not used, its value should…	Integer32r/w Constraints: range: -1-2147483647	.1.3.6.1.2.1.10.166.11.1.4.1.1.15
mplsL3VpnVrfRteInetCidrMetric5 An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value. If this metric is not used, its value should…	Integer32r/w Constraints: range: -1-2147483647	.1.3.6.1.2.1.10.166.11.1.4.1.1.16
mplsL3VpnVrfRteXCPointer Index into mplsXCTable that identifies which cross- connect entry is associated with this VRF route entry by containing the mplsXCIndex of that cross-connect entry. The string containing the single-octet 0x00 indicates …	MPLS-LSR-STD-MIBMplsIndexTyper/w Type Constraints: range: 1..24	.1.3.6.1.2.1.10.166.11.1.4.1.1.17
mplsL3VpnVrfRteInetCidrStatus The row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.166.11.1.4.1.1.18