mplsL3VpnVrfCreationTime
MPLS-L3VPN-STD-MIB ·
.1.3.6.1.2.1.10.166.11.1.2.2.1.5
Object
column
SNMPv2-TCTimeStamp
The time at which this VRF entry was created.
Context
- MIB
- MPLS-L3VPN-STD-MIB
- OID
.1.3.6.1.2.1.10.166.11.1.2.2.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mplsL3VpnVrfEntry
- Table
- mplsL3VpnVrfTable
- Siblings
- 14
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsL3VpnVrfName The human-readable name of this VPN. This MAY
be equivalent to the [RFC2685] VPN-ID, but may
also vary. If it is set to the VPN ID, it MUST
be equivalent to the value of mplsL3V… | column | MplsL3VpnName | .1.3.6.1.2.1.10.166.11.1.2.2.1.1 |
| mplsL3VpnVrfConfHighRteThresh Denotes high-level water marker for the number of
routes that this VRF may hold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.166.11.1.2.2.1.10 |
| mplsL3VpnVrfConfMaxRoutes Denotes maximum number of routes that this VRF is
configured to hold. This value MUST be less than or
equal to mplsL3VpnVrfConfMaxPossRts unless it is set
to 0. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.166.11.1.2.2.1.11 |
| mplsL3VpnVrfConfLastChanged The value of sysUpTime at the time of the last
change of this table entry, which includes changes of
VRF parameters defined in this table or addition or
deletion of interfaces ass… | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.10.166.11.1.2.2.1.12 |
| mplsL3VpnVrfConfRowStatus This variable is used to create, modify, and/or
delete a row in this table.
When a row in this table is in active(1) state, no
objects in that row can be modified e… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.166.11.1.2.2.1.13 |
| mplsL3VpnVrfConfAdminStatus Indicates the desired operational status of this
VRF. | column | Enumeration | .1.3.6.1.2.1.10.166.11.1.2.2.1.14 |
| mplsL3VpnVrfConfStorageType The storage type for this VPN VRF entry.
Conceptual rows having the value 'permanent'
need not allow write access to any columnar
objects in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.10.166.11.1.2.2.1.15 |
| mplsL3VpnVrfVpnId The VPN ID as specified in [RFC2685]. If a VPN ID
has not been specified for this VRF, then this
variable SHOULD be set to a zero-length OCTET
STRING. | column | VPN-TC-STD-MIBVPNIdOrZero | .1.3.6.1.2.1.10.166.11.1.2.2.1.2 |
| mplsL3VpnVrfDescription The human-readable description of this VRF. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.10.166.11.1.2.2.1.3 |
| mplsL3VpnVrfRD The route distinguisher for this VRF. | column | MplsL3VpnRouteDistinguisher | .1.3.6.1.2.1.10.166.11.1.2.2.1.4 |
| mplsL3VpnVrfOperStatus Denotes whether or not a VRF is operational. A VRF is
up(1) when there is at least one interface associated
with the VRF whose ifOperStatus is up(1). A VRF is
down(2) when:
a. T… | column | Enumeration | .1.3.6.1.2.1.10.166.11.1.2.2.1.6 |
| mplsL3VpnVrfActiveInterfaces Total number of interfaces connected to this VRF with
ifOperStatus = up(1).
This value should increase when an interface is associated
with the corresponding VRF an… | column | SNMPv2-SMIGauge32 | .1.3.6.1.2.1.10.166.11.1.2.2.1.7 |
| mplsL3VpnVrfAssociatedInterfaces Total number of interfaces connected to this VRF
(independent of ifOperStatus type). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.166.11.1.2.2.1.8 |
| mplsL3VpnVrfConfMidRteThresh Denotes mid-level water marker for the number
of routes that this VRF may hold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.166.11.1.2.2.1.9 |