mplsL3VpnNumVrfRouteMaxThreshCleared

This notification is generated only after the number of routes
contained by the specified VRF exceeds or attempts to exceed
the maximum allowed value as indicated by
mplsVrfMaxRouteThreshold, and then falls below this value.  The
emission of this notification informs the operator that the
error condition has been cleared without the operator having to
query the device.
          
Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval at
which the mplsNumVrfRouteMaxThreshExceeded notification will
be reissued after the maximum value has been exceeded (or
reached if mplsL3VpnVrfConfMaxRoutes and
mplsL3VpnVrfConfHighRteThresh are equal) and the initial
notification has been issued.  Therefore,
the generation of this notification should also be emitted with
this same frequency (assuming that the error condition is
cleared).  Specifically, if the error condition is reached and
cleared several times during the period of time specified in
mplsL3VpnVrfConfRteMxThrshTime, only a single notification will
be issued to indicate the first instance of the error condition
as well as the first time the error condition is cleared.
This behavior is intended to prevent continuous generation of
notifications by an agent in the event that routes are
continually added and removed to/from a VRF after it has
reached its maximum value.  The default value is 0.  If this
value is set to 0, the agent should issue a notification
whenever the maximum threshold has been cleared.

MIB

MPLS-L3VPN-STD-MIB

OID

.1.3.6.1.2.1.10.166.11.0.6

Type

notification

Status

current

Parent

mplsL3VpnNotifications

Siblings

5