sslCipherSort

MOXA-NP6000-MIB · .1.3.6.1.4.1.8691.2.8.1.4.5.1.1.1
Commands MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
SSL cipher sorting. The format is '2,0,1,3,5,6,8,9,4,7' for example.
The index mapping of each cipher method is shown blow. EDH-RSA-DES-CBC3-SHA(2) has
the highest priority in this example.
			DHE-RSA-AES256-SHA(0),
			AES256-SHA(1),
			EDH-RSA-DES-CBC3-SHA(2),
			DES-CBC3-SHA(3),
			DES-CBC3-MD5(SSL2)(4),
			DHE-RSA-AES128-SHA(5),
			AES128-SHA(6),
			RC4-SHA(7),
			RC4-MD5(8),
			EDH-RSA-DES-CBC-SHA(9),
			DES-CBC-SHA(10),
			DES-CBC-MD5(SSL2)(11)

Context

MIB
MOXA-NP6000-MIB
OID
.1.3.6.1.4.1.8691.2.8.1.4.5.1.1.1
Type
column
Access
readwrite
Status
current
Parent
cipherSettingsPortEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-NP6000-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-NP6000-MIB::sslCipherSort'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'MOXA-NP6000-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-NP6000-MIB::sslCipherSort.<portIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'MOXA-NP6000-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MOXA-NP6000-MIB::sslCipherSort'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Object Constraints
range: 53-53
Type Constraints
range: 0..255