mitelAccResTableTcpSyn
MITEL-IPFILTER-MIB ·
.1.3.6.1.4.1.1027.4.8.1.1.1.3.1.19
Object
column
r/w
Enumeration
TCP header, synchronize sequence numbers flag.
Context
- MIB
- MITEL-IPFILTER-MIB
- OID
.1.3.6.1.4.1.1027.4.8.1.1.1.3.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mitelFltGrpAccessRestrictEntry
- Table
- mitelFltGrpAccessRestrictTable
- Siblings
- 27
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | any |
2 | zero |
3 | one |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mitelAccResTableIfIndex Identifies the destination interface to which this
filter apply. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.1 |
| mitelAccResTableProtocolFrom Defines the lower bound of the protocol ID range. When
determining protocol ID ranges, these four values are
sequential: 254, 255, 0, and 1. | column | Integer32 | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.10 |
| mitelAccResTableProtocolTo Defines the upper bound of the protocol ID range. When
determining protocol ID ranges, these four values are
sequential: 254, 255, 0, and 1. | column | Integer32 | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.11 |
| mitelAccResTableProtocolOutsideRange This indicates whether action is taken on values outside of
the protocol ID range or within that range. | column | Enumeration | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.12 |
| mitelAccResTableSrcPortFrom Defines the lower bound of the source port number range. When
determining port number ranges, these four values are
sequential: 65534, 65535, 0, and 1. | column | Integer32 | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.13 |
| mitelAccResTableSrcPortTo Defines the upper bound of the source port number range. When
determining port number ranges, these four values are
sequential: 65534, 65535, 0, and 1. | column | Integer32 | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.14 |
| mitelAccResTableSrcPortOutsideRange This indicates whether action is taken on values outside of
the source port number range or within that range. | column | Enumeration | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.15 |
| mitelAccResTableDstPortFrom Defines the lower bound of the destination port number range.
When determining port number ranges, these four values are
sequential: 65534, 65535, 0, and 1. | column | Integer32 | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.16 |
| mitelAccResTableDstPortTo Defines the upper bound of the destination port number range.
When determining port number ranges, these four values are
sequential: 65534, 65535, 0, and 1. | column | Integer32 | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.17 |
| mitelAccResTableDstPortOutsideRange This indicates whether action is taken on values outside of
the destination port number range or within that range. | column | Enumeration | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.18 |
| mitelAccResTableOrder Specifies the order that the filters on a destination
are searched. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.2 |
| mitelAccResTableTcpAck TCP header, acknowledgment flag. | column | Enumeration | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.20 |
| mitelAccResTableTcpFin TCP header, finish flag. | column | Enumeration | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.21 |
| mitelAccResTableTcpRst TCP header, reset flag. | column | Enumeration | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.22 |
| mitelAccResTableMatchIn Indicates whether the filter applies to datagrams received
on the interface. Normally, either mitelAccResTableMatchIn or
mitelAccResTableMatchOut should be enabled. | column | Enumeration | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.23 |
| mitelAccResTableMatchOut Indicates whether the filter applies to datagrams
transmitted on the interface. Normally, either
mitelAccResTableMatchIn or mitelAccResTableMatchOut should be enabled. | column | Enumeration | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.24 |
| mitelAccResTableLog Controls whether a log message is to be produced each time
a datagram matches the filter. | column | Enumeration | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.25 |
| mitelAccResTableTrap Controls the generation of SNMP trap. | column | Enumeration | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.26 |
| mitelAccResTableStatus The current status of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.27 |
| mitelAccResTableCount Records the number of datagrams that matched this
instance. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.28 |
| mitelAccResTableType This object indicates what action should be taken
when a match on this entry has occurred. | column | Enumeration | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.3 |
| mitelAccResTableSrcAddrFrom Defines the lower bound of the source IP address range.
When determining address ranges, these four values are
sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and
0.0.0.1. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.4 |
| mitelAccResTableSrcAddrTo Defines the upper bound of the source IP address range.
When determining address ranges, these four values are
sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and
0.0.0.1. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.5 |
| mitelAccResTableSrcAddrOutsideRange This indicates whether action is taken on values outside of
the source IP address range or within that range. | column | Enumeration | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.6 |
| mitelAccResTableDstAddrFrom Defines the lower bound of the destination IP address range.
When determining address ranges, these four values are
sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and
0.0.… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.7 |
| mitelAccResTableDstAddrTo Defines the upper bound of the destination IP address range.
When determining address ranges, these four values are
sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and
0.0.… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.8 |
| mitelAccResTableDstAddrOutsideRange This indicates whether action is taken on values outside of
the destination IP address range or within that range. | column | Enumeration | .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.9 |