MITEL-IPFILTER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
30

mitelFltGrpLogicalTable

table
.1.3.6.1.4.1.1027.4.8.1.1.1.2 · 1 row entry · 2 columns
Open in standard view
Uses the mitel variant from /opt/observium/mibs/mitel.
Command help
Walk mitelFltGrpLogicalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MITEL-IPFILTER-MIB' -M '/opt/observium/mibs/mitel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MITEL-IPFILTER-MIB::mitelFltGrpLogicalTable' 
A table containing information about logical IP LAN
destinations.
mitelFltGrpLogicalEntry row .1.3.6.1.4.1.1027.4.8.1.1.1.2.1
Each entry of this table contains information about
a specific logical interface toa local area network.
Each logical LAN can support routing or bridging
functions, these are considered virtual interfaces.
Indexes
Column Syntax OID
mitelLogTableAccessDef
This object indicates what default access rights
will apply to IP packets that do not match any of the
access restrictions.
Enumerationr/w
Enumerated Values:
1filter
2forward
 .1.3.6.1.4.1.1027.4.8.1.1.1.2.1.1
mitelLogTableAllowSrcRouting
This indicates whether IP datagrams received on this
interface and containing a source route option are to
be discarded or accepted.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1027.4.8.1.1.1.2.1.2

mitelFltGrpAccessRestrictTable

table
.1.3.6.1.4.1.1027.4.8.1.1.1.3 · 1 row entry · 28 columns
Open in standard view
Uses the mitel variant from /opt/observium/mibs/mitel.
Command help
Walk mitelFltGrpAccessRestrictTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MITEL-IPFILTER-MIB' -M '/opt/observium/mibs/mitel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MITEL-IPFILTER-MIB::mitelFltGrpAccessRestrictTable' 
The IP Access REstriction configuration table.
mitelFltGrpAccessRestrictEntry row .1.3.6.1.4.1.1027.4.8.1.1.1.3.1
Contains information about a single IP Access
filter.
Indexes
Column Syntax OID
mitelAccResTableIfIndex
Identifies the destination interface to which this
filter apply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.1
mitelAccResTableOrder
Specifies the order that the filters on a destination
are searched.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.2
mitelAccResTableType
This object indicates what action should be taken
when a match on this entry has occurred.
Enumerationr/w
Enumerated Values:
1filter
2forward
3neither
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.3
mitelAccResTableSrcAddrFrom
Defines the lower bound of the source IP address range.
When determining address ranges, these four values are
sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and
0.0.0.1.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.4
mitelAccResTableSrcAddrTo
Defines the upper bound of the source IP address range.
When determining address ranges, these four values are
sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and
0.0.0.1.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.5
mitelAccResTableSrcAddrOutsideRange
This indicates whether action is taken on values outside of
the source IP address range or within that range.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.6
mitelAccResTableDstAddrFrom
Defines the lower bound of the destination IP address range.
When determining address ranges, these four values are
sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and
0.0.0.1.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.7
mitelAccResTableDstAddrTo
Defines the upper bound of the destination IP address range.
When determining address ranges, these four values are
sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and
0.0.0.1.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.8
mitelAccResTableDstAddrOutsideRange
This indicates whether action is taken on values outside of
the destination IP address range or within that range.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.9
mitelAccResTableProtocolFrom
Defines the lower bound of the protocol ID range. When
determining protocol ID ranges, these four values are
sequential: 254, 255, 0, and 1.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.10
mitelAccResTableProtocolTo
Defines the upper bound of the protocol ID range. When
determining protocol ID ranges, these four values are
sequential: 254, 255, 0, and 1.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.11
mitelAccResTableProtocolOutsideRange
This indicates whether action is taken on values outside of
the protocol ID range or within that range.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.12
mitelAccResTableSrcPortFrom
Defines the lower bound of the source port number range. When
determining port number ranges, these four values are
sequential: 65534, 65535, 0, and 1.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.13
mitelAccResTableSrcPortTo
Defines the upper bound of the source port number range. When
determining port number ranges, these four values are
sequential: 65534, 65535, 0, and 1.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.14
mitelAccResTableSrcPortOutsideRange
This indicates whether action is taken on values outside of
the source port number range or within that range.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.15
mitelAccResTableDstPortFrom
Defines the lower bound of the destination port number range.
When determining port number ranges, these four values are
sequential: 65534, 65535, 0, and 1.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.16
mitelAccResTableDstPortTo
Defines the upper bound of the destination port number range.
When determining port number ranges, these four values are
sequential: 65534, 65535, 0, and 1.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.17
mitelAccResTableDstPortOutsideRange
This indicates whether action is taken on values outside of
the destination port number range or within that range.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.18
mitelAccResTableTcpSyn
TCP header, synchronize sequence numbers flag.
Enumerationr/w
Enumerated Values:
1any
2zero
3one
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.19
mitelAccResTableTcpAck
TCP header, acknowledgment flag.
Enumerationr/w
Enumerated Values:
1any
2zero
3one
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.20
mitelAccResTableTcpFin
TCP header, finish flag.
Enumerationr/w
Enumerated Values:
1any
2zero
3one
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.21
mitelAccResTableTcpRst
TCP header, reset flag.
Enumerationr/w
Enumerated Values:
1any
2zero
3one
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.22
mitelAccResTableMatchIn
Indicates whether the filter applies to datagrams received
on the interface. Normally, either mitelAccResTableMatchIn or
mitelAccResTableMatchOut should be enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.23
mitelAccResTableMatchOut
Indicates whether the filter applies to datagrams
transmitted on the interface. Normally, either
mitelAccResTableMatchIn or mitelAccResTableMatchOut should be enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.24
mitelAccResTableLog
Controls whether a log message is to be produced each time
a datagram matches the filter.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.25
mitelAccResTableTrap
Controls the generation of SNMP trap.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.26
mitelAccResTableStatus
The current status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.27
mitelAccResTableCount
Records the number of datagrams that matched this
instance.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.1.1.3.1.28