me1200LldpmedStatusRemoteDeviceInfoElinAddr
ME1200-LLDPMED-MIB ·
.1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.12
Object
column
OctetString
Emergency Call Service ELIN identifier data format is defined to carry the ELIN identifier as used during emergency call setup to a traditional CAMA or ISDN trunk-based PSAP. This format consists of a numerical digit string, corresponding to the ELIN to be used for emergency calling. Maximum number of octets are 25.
Context
- MIB
- ME1200-LLDPMED-MIB
- OID
.1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- me1200LldpmedStatusRemoteDeviceInfoEntry
- Table
- me1200LldpmedStatusRemoteDeviceInfoTable
- Siblings
- 22
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-25
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| me1200LldpmedStatusRemoteDeviceInfoIfIndex Logical interface number. | column | ME1200-TCME1200InterfaceIndex | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.1 |
| me1200LldpmedStatusRemoteDeviceInfoDatum Datum (geodetic system) .
The Map Datum is used for the coordinates given in these options:
WGS84: (Geographical 3D) - World Geodesic System 1984, CR… | column | ME1200lldpmedDatumType | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.10 |
| me1200LldpmedStatusRemoteDeviceInfoDeviceType Shows the LLDP neighbor's device type. | column | ME1200lldpmedRemoteDeviceType | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.13 |
| me1200LldpmedStatusRemoteDeviceInfoHwRev Shows the LLDP neighbor's hardware revision. | column | OctetString | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.14 |
| me1200LldpmedStatusRemoteDeviceInfoFwRev Shows the LLDP neighbor's firmware revision. | column | OctetString | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.15 |
| me1200LldpmedStatusRemoteDeviceInfoSwRev Shows the LLDP neighbor's software revision. | column | OctetString | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.16 |
| me1200LldpmedStatusRemoteDeviceInfoSerialNo Shows the LLDP neighbor's serial number. | column | OctetString | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.17 |
| me1200LldpmedStatusRemoteDeviceInfoManufacturerName Shows the LLDP neighbor's manufacturer name. | column | OctetString | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.18 |
| me1200LldpmedStatusRemoteDeviceInfoModelName Shows the LLDP neighbor's model name. | column | OctetString | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.19 |
| me1200LldpmedStatusRemoteDeviceInfoLldpmedIndex Neighbor information table entry index. | column | Integer32 | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.2 |
| me1200LldpmedStatusRemoteDeviceInfoAssetId Shows the LLDP neighbor's asset id. | column | OctetString | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.20 |
| me1200LldpmedStatusRemoteDeviceInfoEeeRxTwSys Shows the LLDP neighbor's Receive tw_sys_rx . Tw_sys_rx is defined as
the time (expressed in microseconds) that the transmitting link partner
will wait before it starts transmitti… | column | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.21 |
| me1200LldpmedStatusRemoteDeviceInfoEeeTxTwSys Shows the LLDP neighbor's Transmit Tw_sys_tx . Tw_sys_tx is defined as
the time (expressed in microseconds) that the receiving link partner is
requesting the transmitting link par… | column | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.22 |
| me1200LldpmedStatusRemoteDeviceInfoEeeFbTwSys Shows the LLDP neighbor's Fallback tw_sys_tx. A receiving link partner
may inform the transmitter of an alternate desired Tw_sys_tx. Since a
receiving link partner is likely to ha… | column | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.23 |
| me1200LldpmedStatusRemoteDeviceInfoEeeTxTwSysEcho Shows the LLDP neighbor's echo transmit Tw. The respective echo values
shall be defined as the local link partners reflection (echo) of the
remote link partners respective values.… | column | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.24 |
| me1200LldpmedStatusRemoteDeviceInfoEeeRxTwSysEcho Shows the LLDP neighbor's echo receive Tw. The respective echo values
shall be defined as the local link partners reflection (echo) of the
remote link partners respective values. … | column | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.25 |
| me1200LldpmedStatusRemoteDeviceInfoCapabilities LLDP neighbor's capabilities bit mask.
Bit 0 represents LLDP-MED capabilities.
Bit 1 represents Network Policy.
Bit 2 represents Locat… | column | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.4 |
| me1200LldpmedStatusRemoteDeviceInfoCapabilitiesEnabled LLDP neighbor's capabilities bit mask for the capabilities which are
currently enabled.
Bit 0 represents LLDP-MED capabilities.
Bit 1 represents Netw… | column | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.5 |
| me1200LldpmedStatusRemoteDeviceInfoLatitude Latitude degrees in 2s-complement as specified in RFC 3825. Positive
numbers are north of the equator and negative numbers are south of the
equator. | column | ME1200-TCME1200Integer64 | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.6 |
| me1200LldpmedStatusRemoteDeviceInfoLongitude Longitude degrees in 2s-complement as specified in RFC 3825. Positive
values are East of the prime meridian and negative numbers are West of
the prime meridian. | column | ME1200-TCME1200Integer64 | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.7 |
| me1200LldpmedStatusRemoteDeviceInfoAltitudeType Altitude type as either floors or meters. Meters are representing
meters of altitude defined by the vertical datum specified. Floors are
representing altitude in a form more relev… | column | ME1200lldpmedAltitudeType | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.8 |
| me1200LldpmedStatusRemoteDeviceInfoAltitude Altitude value in 2s-complement as specified in RFC 3825 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.9 |