ME1200-LLDPMED-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
71

me1200LldpmedConfigTable

table
.1.3.6.1.4.1.9.9.815.1.71.1.2.3 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200LldpmedConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-LLDPMED-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-LLDPMED-MIB::me1200LldpmedConfigTable' 
This is a table to configure LLDP MEDIA configurations for a specific
interface.
me1200LldpmedConfigEntry row .1.3.6.1.4.1.9.9.815.1.71.1.2.3.1
Each port has a set of control parameters
Indexes
Column Syntax OID
me1200LldpmedConfigIfIndex
Logical interface number.
ME1200-TCME1200InterfaceIndex
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.815.1.71.1.2.3.1.1
me1200LldpmedConfigOptionalTlvs
Enables/Disables the LLDP optional TLVs. Bit mask, where setting the
bit(1) to 1 means enable the optional TLV.

Bit 0 represents the capabilities TLV.

Bit 1 represents the network Policy TL…
Unsigned32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.9.9.815.1.71.1.2.3.1.3
me1200LldpmedConfigDeviceType
Setting device type to configure the mode the device shall operate as.
ME1200lldpmedDeviceTyper/w
Type Values:
0connectivity
1endpoint
 .1.3.6.1.4.1.9.9.815.1.71.1.2.3.1.4

me1200LldpmedConfigPolicyTable

table
.1.3.6.1.4.1.9.9.815.1.71.1.2.4 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200LldpmedConfigPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-LLDPMED-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-LLDPMED-MIB::me1200LldpmedConfigPolicyTable' 
This is a table to configure LLDP MED Policies for the device.
me1200LldpmedConfigPolicyEntry row .1.3.6.1.4.1.9.9.815.1.71.1.2.4.1
Network Policy Discovery enables the efficient discovery and diagnosis
of mismatch issues with the VLAN configuration, along with the
associated Layer 2 and Layer 3 attributes, which apply for a set of
specific protocol…
Indexes
Column Syntax OID
me1200LldpmedConfigPolicyLldpmedPolicy
Policy index.
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.1
me1200LldpmedConfigPolicyApplicationType
The LLDP policy application type.
ME1200lldpmedRemoteNetworkPolicyApplicationTyper/w
Type Values:
1voice
2voiceSignaling
3guestVoice
4gustVoiceSignaling
5softphoneVoice
6videoConferencing
7streamingVideo
8videoSignaling
 .1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.2
me1200LldpmedConfigPolicyTagged
Defines if LLDP policy uses tagged VLAN.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.3
me1200LldpmedConfigPolicyVlanId
The policy VLAN ID. Only valid when policy 'Tagged' is TRUE.
Unsigned32r/w
Constraints:
range: 1-4095
 .1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.4
me1200LldpmedConfigPolicyL2Priority
Shows the LLDP neighbor's policy L2 priority. Only valid when policy
'Tagged' is TRUE.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.5
me1200LldpmedConfigPolicyDscp
LLDP policy DSCP.
Unsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.6
me1200LldpmedConfigPolicyAction
Action
ME1200-TCME1200RowEditorStater/w .1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.100

me1200LldpmedConfigPolicyListTable

table
.1.3.6.1.4.1.9.9.815.1.71.1.2.5 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200LldpmedConfigPolicyListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-LLDPMED-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-LLDPMED-MIB::me1200LldpmedConfigPolicyListTable' 
Each interface can be mapped to multiple policies. Set to TRUE in order
to enable the corresponding policy to be transmitted at the interface.
It is a requirement that the policy is defined.
me1200LldpmedConfigPolicyListEntry row .1.3.6.1.4.1.9.9.815.1.71.1.2.5.1
Each location information has a control parameter
Indexes
Column Syntax OID
me1200LldpmedConfigPolicyListIfIndex
Logical interface number.
ME1200-TCME1200InterfaceIndex
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.815.1.71.1.2.5.1.1
me1200LldpmedConfigPolicyListPolicyIndex
Logical Policy index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.815.1.71.1.2.5.1.2
me1200LldpmedConfigPolicyListLldpmedPoliciesList
Set to TRUE assign the corresponding policy index to the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.71.1.2.5.1.3

me1200LldpmedStatusRemoteDeviceInfoTable

table
.1.3.6.1.4.1.9.9.815.1.71.1.3.3 · 1 row entry · 23 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200LldpmedStatusRemoteDeviceInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-LLDPMED-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-LLDPMED-MIB::me1200LldpmedStatusRemoteDeviceInfoTable' 
This is a table to show the LLDP-MED remote device (neighbor)
information for a specific interface.
me1200LldpmedStatusRemoteDeviceInfoEntry row .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1
Each port has a set of neighbor's information
Indexes
Column Syntax OID
me1200LldpmedStatusRemoteDeviceInfoIfIndex
Logical interface number.
ME1200-TCME1200InterfaceIndex
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.1
me1200LldpmedStatusRemoteDeviceInfoLldpmedIndex
Neighbor information table entry index.
Integer32
Constraints:
range: 0-192
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.2
me1200LldpmedStatusRemoteDeviceInfoCapabilities
LLDP neighbor's capabilities bit mask.

Bit 0 represents LLDP-MED capabilities.

Bit 1 represents Network Policy.

Bit 2 represents Location Identification.

Bit 3…
ME1200-TCME1200Unsigned16
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.4
me1200LldpmedStatusRemoteDeviceInfoCapabilitiesEnabled
LLDP neighbor's capabilities bit mask for the capabilities which are
currently enabled.

Bit 0 represents LLDP-MED capabilities.

Bit 1 represents Network Policy.

Bit 2 represe…
ME1200-TCME1200Unsigned16
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.5
me1200LldpmedStatusRemoteDeviceInfoLatitude
Latitude degrees in 2s-complement as specified in RFC 3825. Positive
numbers are north of the equator and negative numbers are south of the
equator.
ME1200-TCME1200Integer64
Type Constraints:
range: 8
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.6
me1200LldpmedStatusRemoteDeviceInfoLongitude
Longitude degrees in 2s-complement as specified in RFC 3825. Positive
values are East of the prime meridian and negative numbers are West of
the prime meridian.
ME1200-TCME1200Integer64
Type Constraints:
range: 8
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.7
me1200LldpmedStatusRemoteDeviceInfoAltitudeType
Altitude type as either floors or meters. Meters are representing
meters of altitude defined by the vertical datum specified. Floors are
representing altitude in a form more relevant in buildings which have
different fl…
ME1200lldpmedAltitudeType
Type Values:
1meters
2floor
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.8
me1200LldpmedStatusRemoteDeviceInfoAltitude
Altitude value in 2s-complement as specified in RFC 3825
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.9
me1200LldpmedStatusRemoteDeviceInfoDatum
Datum (geodetic system) .

The Map Datum is used for the coordinates given in these options:

WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327,
Prime Meridian Name: Greenw…
ME1200lldpmedDatumType
Type Values:
1wgs84
2nad83navd88
3nad83mllw
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.10
me1200LldpmedStatusRemoteDeviceInfoElinAddr
Emergency Call Service ELIN identifier data format is defined to carry
the ELIN identifier as used during emergency call setup to a
traditional CAMA or ISDN trunk-based PSAP. This format consists of a
numerical digit st…
OctetString
Constraints:
range: 0-25
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.12
me1200LldpmedStatusRemoteDeviceInfoDeviceType
Shows the LLDP neighbor's device type.
ME1200lldpmedRemoteDeviceType
Type Values:
0notDefined
1endpointClassI
2endpointClassII
3endpointClassIII
4networkConnectivity
5reserved
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.13
me1200LldpmedStatusRemoteDeviceInfoHwRev
Shows the LLDP neighbor's hardware revision.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.14
me1200LldpmedStatusRemoteDeviceInfoFwRev
Shows the LLDP neighbor's firmware revision.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.15
me1200LldpmedStatusRemoteDeviceInfoSwRev
Shows the LLDP neighbor's software revision.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.16
me1200LldpmedStatusRemoteDeviceInfoSerialNo
Shows the LLDP neighbor's serial number.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.17
me1200LldpmedStatusRemoteDeviceInfoManufacturerName
Shows the LLDP neighbor's manufacturer name.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.18
me1200LldpmedStatusRemoteDeviceInfoModelName
Shows the LLDP neighbor's model name.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.19
me1200LldpmedStatusRemoteDeviceInfoAssetId
Shows the LLDP neighbor's asset id.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.20
me1200LldpmedStatusRemoteDeviceInfoEeeRxTwSys
Shows the LLDP neighbor's Receive tw_sys_rx . Tw_sys_rx is defined as
the time (expressed in microseconds) that the transmitting link partner
will wait before it starts transmitting data after leaving the Low
Power Idle…
ME1200-TCME1200Unsigned16
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.21
me1200LldpmedStatusRemoteDeviceInfoEeeTxTwSys
Shows the LLDP neighbor's Transmit Tw_sys_tx . Tw_sys_tx is defined as
the time (expressed in microseconds) that the receiving link partner is
requesting the transmitting link partner to wait before starting the
transmi…
ME1200-TCME1200Unsigned16
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.22
me1200LldpmedStatusRemoteDeviceInfoEeeFbTwSys
Shows the LLDP neighbor's Fallback tw_sys_tx. A receiving link partner
may inform the transmitter of an alternate desired Tw_sys_tx. Since a
receiving link partner is likely to have discrete levels for savings,
this pro…
ME1200-TCME1200Unsigned16
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.23
me1200LldpmedStatusRemoteDeviceInfoEeeTxTwSysEcho
Shows the LLDP neighbor's echo transmit Tw. The respective echo values
shall be defined as the local link partners reflection (echo) of the
remote link partners respective values. When a local link partner
receives its …
ME1200-TCME1200Unsigned16
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.24
me1200LldpmedStatusRemoteDeviceInfoEeeRxTwSysEcho
Shows the LLDP neighbor's echo receive Tw. The respective echo values
shall be defined as the local link partners reflection (echo) of the
remote link partners respective values. When a local link partner
receives its e…
ME1200-TCME1200Unsigned16
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.25

me1200LldpmedStatusRemoteDeviceLocInfoTable

table
.1.3.6.1.4.1.9.9.815.1.71.1.3.4 · 1 row entry · 26 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200LldpmedStatusRemoteDeviceLocInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-LLDPMED-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-LLDPMED-MIB::me1200LldpmedStatusRemoteDeviceLocInfoTable' 
This is a table to show the LLDP-MED remote device (neighbor) civic
location information for a specific interface.
me1200LldpmedStatusRemoteDeviceLocInfoEntry row .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1
Each port has a set of neighbors information
Indexes
Column Syntax OID
me1200LldpmedStatusRemoteDeviceLocInfoIfIndex
Logical interface number.
ME1200-TCME1200InterfaceIndex
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.1
me1200LldpmedStatusRemoteDeviceLocInfoLldpmedIndex
Neighbor information table entry index.
Integer32
Constraints:
range: 0-192
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.2
me1200LldpmedStatusRemoteDeviceLocInfoState
National subdivision
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.5
me1200LldpmedStatusRemoteDeviceLocInfoCounty
County
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.6
me1200LldpmedStatusRemoteDeviceLocInfoCity
City
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.7
me1200LldpmedStatusRemoteDeviceLocInfoCityDistrict
City district
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.8
me1200LldpmedStatusRemoteDeviceLocInfoBlock
Block (Neighborhood)
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.9
me1200LldpmedStatusRemoteDeviceLocInfoStreet
Street
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.10
me1200LldpmedStatusRemoteDeviceLocInfoLeadingStreetDirection
Street Direction
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.11
me1200LldpmedStatusRemoteDeviceLocInfoTrailingStreetSuffix
Trailling Street
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.12
me1200LldpmedStatusRemoteDeviceLocInfoStreetSuffix
Street Suffix
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.13
me1200LldpmedStatusRemoteDeviceLocInfoHouseNo
House No.
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.14
me1200LldpmedStatusRemoteDeviceLocInfoHouseNoSuffix
House No. Suffix
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.15
me1200LldpmedStatusRemoteDeviceLocInfoLandmark
Landmark
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.16
me1200LldpmedStatusRemoteDeviceLocInfoAdditionalInfo
Additional Location Info
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.17
me1200LldpmedStatusRemoteDeviceLocInfoName
Name
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.18
me1200LldpmedStatusRemoteDeviceLocInfoZipCode
Zip Code
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.19
me1200LldpmedStatusRemoteDeviceLocInfoBuilding
Building
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.20
me1200LldpmedStatusRemoteDeviceLocInfoApartment
Unit
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.21
me1200LldpmedStatusRemoteDeviceLocInfoFloor
Floor
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.22
me1200LldpmedStatusRemoteDeviceLocInfoRoomNumber
Room No.
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.23
me1200LldpmedStatusRemoteDeviceLocInfoPlaceType
Placetype
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.24
me1200LldpmedStatusRemoteDeviceLocInfoPostalCommunityName
Postal Community Name
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.25
me1200LldpmedStatusRemoteDeviceLocInfoPoBox
P.O. Box
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.26
me1200LldpmedStatusRemoteDeviceLocInfoAdditionalCode
Addination Code
OctetString
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.27
me1200LldpmedStatusRemoteDeviceLocInfoCountryCode
The two-letter ISO 3166 country code in capital ASCII letters -
Example: DK, DE or US.
OctetString
Constraints:
range: 0-2
 .1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.28

me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoTable

table
.1.3.6.1.4.1.9.9.815.1.71.1.3.5 · 1 row entry · 9 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-LLDPMED-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-LLDPMED-MIB::me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoTable' 
This is a table to show the LLDP-MED remote device (neighbor) network
policies information for a specific interface.
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry row .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1
Each port has a set of neighbors information
Indexes
Column Syntax OID
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoIfIndex
Logical interface number.
ME1200-TCME1200InterfaceIndex
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.1
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoLldpmedIndex
Neighbor information table entry index.
Integer32
Constraints:
range: 0-192
 .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.2
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoPolicyIndex
Logical Policy index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.3
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoApplicationType
The LLDP policy application type.
ME1200lldpmedRemoteNetworkPolicyApplicationType
Type Values:
1voice
2voiceSignaling
3guestVoice
4gustVoiceSignaling
5softphoneVoice
6videoConferencing
7streamingVideo
8videoSignaling
 .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.5
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoUnknownPolicy
Policy indicates that an Endpoint Device wants to explicitly advertise
that the policy is required by the device. Can be either Defined or
Unknown

Unknown: The network policy for the specified application…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.6
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoTagged
Defines if LLDP policy uses tagged VLAN.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.7
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoVlanId
The policy VLAN ID. Only valid when policy 'Tagged' is TRUE.
Unsigned32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.8
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoL2Priority
Shows the LLDP neighbor's policy L2 priority. Only valid when policy
'Tagged' is TRUE.
Unsigned32
Constraints:
range: 0-7
 .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.9
me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoDscp
LLDP policy DSCP.
Unsigned32
Constraints:
range: 0-63
 .1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.10