ifMauTypeList
MAU-MIB ·
.1.3.6.1.2.1.26.2.1.1.10
Object
********* THIS OBJECT IS DEPRECATED **********
This object has been deprecated in favour of
ifMauTypeListBits.
A value that uniquely identifies the set of
possible IEEE 802.3 types that the MAU could be.
The value is a sum that initially takes the
value zero. Then, for each type capability of
this MAU, 2 raised to the power noted below is
added to the sum. For example, a MAU that has
the capability to be only 10BASE-T would have a
value of 512 (2**9). In contrast, a MAU that
supports both 10Base-T (full duplex) and
100BASE-TX (full duplex) would have a value of
((2**11) + (2**16)), or 67584.
The powers of 2 assigned to the capabilities are
these:
Power Capability
0 other or unknown
1 AUI
2 10BASE-5
3 FOIRL
4 10BASE-2
5 10BASE-T duplex mode unknown
6 10BASE-FP
7 10BASE-FB
8 10BASE-FL duplex mode unknown
9 10BROAD36
10 10BASE-T half duplex mode
11 10BASE-T full duplex mode
12 10BASE-FL half duplex mode
13 10BASE-FL full duplex mode
14 100BASE-T4
15 100BASE-TX half duplex mode
16 100BASE-TX full duplex mode
17 100BASE-FX half duplex mode
18 100BASE-FX full duplex mode
19 100BASE-T2 half duplex mode
20 100BASE-T2 full duplex mode
If auto-negotiation is present on this MAU, this
object will map to ifMauAutoNegCapability.
Context
- MIB
- MAU-MIB
- OID
.1.3.6.1.2.1.26.2.1.1.10- Type
- column
- Access
- readonly
- Status
- deprecated
- Parent
- ifMauEntry
- Table
- ifMauTable
- Siblings
- 13
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifMauIfIndex This variable uniquely identifies the interface
to which the MAU described by this entry is
connected. | column | IF-MIBInterfaceIndex | .1.3.6.1.2.1.26.2.1.1.1 |
| ifMauDefaultType This object identifies the default
administrative baseband MAU type to be used in
conjunction with the operational MAU type
denoted by ifMauType.
The set of possibl… | column | SNMPv2-TCAutonomousType | .1.3.6.1.2.1.26.2.1.1.11 |
| ifMauAutoNegSupported This object indicates whether or not
auto-negotiation is supported on this MAU. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.26.2.1.1.12 |
| ifMauTypeListBits A value that uniquely identifies the set of
possible IEEE 802.3 types that the MAU could be.
If auto-negotiation is present on this MAU, this
object will map to ifMauAutoNegCapabi… | column | IANA-MAU-MIBIANAifMauTypeListBits | .1.3.6.1.2.1.26.2.1.1.13 |
| ifMauHCFalseCarriers A count of the number of false carrier events
during IDLE in 100BASE-X and 1000BASE-X links.
For all other MAU types, this counter will
always indicate zero. This … | column | SNMPv2-SMICounter64 | .1.3.6.1.2.1.26.2.1.1.14 |
| ifMauIndex This variable uniquely identifies the MAU
described by this entry from among other MAUs
connected to the same interface (ifMauIfIndex). | column | Integer32 | .1.3.6.1.2.1.26.2.1.1.2 |
| ifMauType This object identifies the MAU type. Values for
standard IEEE 802.3 MAU types are defined in the
IANA maintained IANA-MAU-MIB module, as
OBJECT-IDENTITIES of dot3MauType.
If the … | column | SNMPv2-TCAutonomousType | .1.3.6.1.2.1.26.2.1.1.3 |
| ifMauStatus The current state of the MAU. This object MAY
be implemented as a read-only object by those
agents and MAUs that do not implement software
control of the MAU state. Some agents … | column | Enumeration | .1.3.6.1.2.1.26.2.1.1.4 |
| ifMauMediaAvailable This object identifies Media Available state of
the MAU, complementary to the ifMauStatus. Values
for the standard IEEE 802.3 Media Available states
are defined in the IANA maint… | column | IANA-MAU-MIBIANAifMauMediaAvailable | .1.3.6.1.2.1.26.2.1.1.5 |
| ifMauMediaAvailableStateExits A count of the number of times that
ifMauMediaAvailable for this MAU instance leaves
the state available(3).
Discontinuities in the value of this counter can
occur … | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.26.2.1.1.6 |
| ifMauJabberState The value other(1) is returned if the jabber
state is not 2, 3, or 4. The agent MUST always
return other(1) for MAU type dot3MauTypeAUI.
The value unknown(2) is re… | column | Enumeration | .1.3.6.1.2.1.26.2.1.1.7 |
| ifMauJabberingStateEnters A count of the number of times that
mauJabberState for this MAU instance enters the
state jabbering(4). This counter will always
indicate zero for MAUs of type dot3MauTypeAUI
and… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.26.2.1.1.8 |
| ifMauFalseCarriers A count of the number of false carrier events
during IDLE in 100BASE-X and 1000BASE-X links.
For all other MAU types, this counter will
always indicate zero. This … | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.26.2.1.1.9 |