MAU-MIB
Management information for 802.3 MAUs.
The following reference is used throughout this MIB module:
[IEEE802.3] refers to:
IEEE Std 802.3, 2005 Edition: 'IEEE Standard for Information
technology - Telecommunications and information exchange
between systems - Local and metropolitan area networks -
Specific requirements - Part 3: Carrier sense multiple
access with collision detection (CSMA/CD) access method and
physical layer specifications'.
Of particular interest is Clause 30, 'Management'.
Copyright (C) The IETF Trust (2007).
This version of this MIB module is part of RFC 4836;
see the RFC itself for full legal notices.
- Source file
MAU-MIB- Last revised
- Identity
mauMod- Base OID
1.3.6.1.2.1.26.6
Imported Objects
| IANA-MAU-MIB | IANAifJackType IANAifMauAutoNegCapBits IANAifMauMediaAvailable IANAifMauTypeListBits |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Counter64 Integer32 mib-2 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | AutonomousType TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'MAU-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MAU-MIB::mauMod'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MAU-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MAU-MIB::mauMod'
Objects (68)
Showing 68 of 68 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.26 |
||
.1.3.6.1.2.1.26.0 |
||
.1.3.6.1.2.1.26.1 |
||
.1.3.6.1.2.1.26.1.1 |
||
.1.3.6.1.2.1.26.1.1.1 |
||
|
Integer32
|
.1.3.6.1.2.1.26.1.1.1.1 |
|
.1.3.6.1.2.1.26.1.1.1.10 |
||
|
Integer32
|
.1.3.6.1.2.1.26.1.1.1.2 |
|
|
Integer32
|
.1.3.6.1.2.1.26.1.1.1.3 |
|
.1.3.6.1.2.1.26.1.1.1.4 |
||
|
|
Enumeration
|
.1.3.6.1.2.1.26.1.1.1.5 |
.1.3.6.1.2.1.26.1.1.1.6 |
||
.1.3.6.1.2.1.26.1.1.1.7 |
||
|
Enumeration
|
.1.3.6.1.2.1.26.1.1.1.8 |
|
.1.3.6.1.2.1.26.1.1.1.9 |
||
.1.3.6.1.2.1.26.1.2 |
||
.1.3.6.1.2.1.26.1.2.1 |
||
|
Integer32
|
.1.3.6.1.2.1.26.1.2.1.1 |
|
.1.3.6.1.2.1.26.1.2.1.2 |
||
.1.3.6.1.2.1.26.2 |
||
.1.3.6.1.2.1.26.2.1 |
||
.1.3.6.1.2.1.26.2.1.1 |
||
.1.3.6.1.2.1.26.2.1.1.1 |
||
|
|
.1.3.6.1.2.1.26.2.1.1.10 |
|
|
|
.1.3.6.1.2.1.26.2.1.1.11 |
|
.1.3.6.1.2.1.26.2.1.1.12 |
||
.1.3.6.1.2.1.26.2.1.1.13 |
||
.1.3.6.1.2.1.26.2.1.1.14 |
||
|
Integer32
|
.1.3.6.1.2.1.26.2.1.1.2 |
|
.1.3.6.1.2.1.26.2.1.1.3 |
||
|
|
Enumeration
|
.1.3.6.1.2.1.26.2.1.1.4 |
.1.3.6.1.2.1.26.2.1.1.5 |
||
.1.3.6.1.2.1.26.2.1.1.6 |
||
|
Enumeration
|
.1.3.6.1.2.1.26.2.1.1.7 |
|
.1.3.6.1.2.1.26.2.1.1.8 |
||
.1.3.6.1.2.1.26.2.1.1.9 |
||
.1.3.6.1.2.1.26.2.2 |
||
.1.3.6.1.2.1.26.2.2.1 |
||
|
Integer32
|
.1.3.6.1.2.1.26.2.2.1.1 |
|
.1.3.6.1.2.1.26.2.2.1.2 |
||
.1.3.6.1.2.1.26.3 |
||
|
|
.1.3.6.1.2.1.26.3.1 |
|
|
|
.1.3.6.1.2.1.26.3.1.1 |
|
|
|
.1.3.6.1.2.1.26.3.1.1.1 |
|
|
|
Integer32
|
.1.3.6.1.2.1.26.3.1.1.2 |
|
|
Enumeration
|
.1.3.6.1.2.1.26.3.1.1.3 |
|
|
.1.3.6.1.2.1.26.3.1.1.4 |
|
|
|
.1.3.6.1.2.1.26.3.1.1.5 |
|
.1.3.6.1.2.1.26.5 |
||
.1.3.6.1.2.1.26.5.1 |
||
.1.3.6.1.2.1.26.5.1.1 |
||
|
Enumeration
|
.1.3.6.1.2.1.26.5.1.1.1 |
|
.1.3.6.1.2.1.26.5.1.1.10 |
||
.1.3.6.1.2.1.26.5.1.1.11 |
||
|
Enumeration
|
.1.3.6.1.2.1.26.5.1.1.12 |
|
|
Enumeration
|
.1.3.6.1.2.1.26.5.1.1.13 |
|
|
Enumeration
|
.1.3.6.1.2.1.26.5.1.1.2 |
|
|
Enumeration
|
.1.3.6.1.2.1.26.5.1.1.4 |
|
|
|
.1.3.6.1.2.1.26.5.1.1.5 |
|
|
|
.1.3.6.1.2.1.26.5.1.1.6 |
|
|
|
.1.3.6.1.2.1.26.5.1.1.7 |
|
|
Enumeration
|
.1.3.6.1.2.1.26.5.1.1.8 |
|
.1.3.6.1.2.1.26.5.1.1.9 |
||
.1.3.6.1.2.1.26.6 |
||
.1.3.6.1.2.1.26.6.1 |
||
.1.3.6.1.2.1.26.6.1.1 |
||
.1.3.6.1.2.1.26.6.1.2 |
||
.1.3.6.1.2.1.26.6.1.3 |
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANA-MAU-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- MAU-MIBrfcselected
Type Definitions (1)
| Enumeration |
other(1)rj45(2)rj45S(3)db9(4)bnc(5)fAUI(6)mAUI(7)fiberSC(8)fiberMIC(9)fiberST(10)telco(11)mtrj(12)hssdc(13)fiberLC(14) |
Conformance Groups (14)
|
rpMauGroupIndex rpMauPortIndex rpMauIndex rpMauType rpMauStatus rpMauMediaAvailable rpMauMediaAvailableStateExits rpMauJabberState rpMauJabberingStateEnters
Basic conformance group for MAUs attached to
repeater ports. This group is also the conformance specification for RFC 1515 implementations. |
.1.3.6.1.2.1.26.6.1.2.1
|
|
|
Conformance group for MAUs attached to
repeater ports with 100 Mb/s or greater capability. |
.1.3.6.1.2.1.26.6.1.2.2
|
|
|
Conformance group for MAUs attached to
repeater ports with managed jacks. |
.1.3.6.1.2.1.26.6.1.2.3
|
|
|
ifMauIfIndex ifMauIndex ifMauType ifMauStatus ifMauMediaAvailable ifMauMediaAvailableStateExits ifMauJabberState ifMauJabberingStateEnters
Basic conformance group for MAUs attached to
interfaces. This group also provides a conformance specification for RFC 1515 implementations. |
.1.3.6.1.2.1.26.6.1.2.4
|
|
|
mauIfGrp100Mbs
deprecated
|
********* THIS GROUP IS DEPRECATED **********
Conformance group for MAUs attached to interfaces with 100 Mb/s capability. This object group has been deprecated in favor of mauIfGrpHighCapacity. |
.1.3.6.1.2.1.26.6.1.2.5
|
|
Conformance group for MAUs attached to
interfaces with managed jacks. |
.1.3.6.1.2.1.26.6.1.2.6
|
|
|
mauIfGrpAutoNeg
deprecated
|
ifMauAutoNegAdminStatus ifMauAutoNegRemoteSignaling ifMauAutoNegConfig ifMauAutoNegCapability ifMauAutoNegCapAdvertised ifMauAutoNegCapReceived ifMauAutoNegRestart
********* THIS GROUP IS DEPRECATED **********
Conformance group for MAUs attached to interfaces with managed auto-negotiation. This object group has been deprecated in favor of mauIfGrpAutoNeg2. |
.1.3.6.1.2.1.26.6.1.2.7
|
|
mauBroadBasic
deprecated
|
broadMauIfIndex broadMauIndex broadMauXmtRcvSplitType broadMauXmtCarrierFreq broadMauTranslationFreq
********* THIS GROUP IS DEPRECATED **********
Conformance group for broadband MAUs attached to interfaces. This object group is deprecated. There have been no reported implementations of this group, and it was felt to be unlikely that there will be any future implementations. |
.1.3.6.1.2.1.26.6.1.2.8
|
|
Conformance group for MAUs attached to
interfaces with 100 Mb/s or greater capability. |
.1.3.6.1.2.1.26.6.1.2.9
|
|
|
ifMauAutoNegAdminStatus ifMauAutoNegRemoteSignaling ifMauAutoNegConfig ifMauAutoNegCapabilityBits ifMauAutoNegCapAdvertisedBits ifMauAutoNegCapReceivedBits ifMauAutoNegRestart
Conformance group for MAUs attached to
interfaces with managed auto-negotiation. |
.1.3.6.1.2.1.26.6.1.2.10
|
|
|
Conformance group for 1000Mbps MAUs attached to
interfaces with managed auto-negotiation. |
.1.3.6.1.2.1.26.6.1.2.11
|
|
|
Conformance for high capacity statistics for
MAUs attached to interfaces. |
.1.3.6.1.2.1.26.6.1.2.12
|
|
|
Notifications for repeater MAUs.
|
.1.3.6.1.2.1.26.6.1.3.1
|
|
|
Notifications for interface MAUs.
|
.1.3.6.1.2.1.26.6.1.3.2
|
Compliance Statements (5)
OID
.1.3.6.1.2.1.26.6.1.1.1******** THIS COMPLIANCE IS DEPRECATED ********
Compliance for MAUs attached to repeater
ports.
This compliance is deprecated and replaced by
mauModRpCompl2, which corrects an oversight by
allowing rpMauStatus to be implemented
read-only.
Compliance for MAUs attached to repeater
ports.
This compliance is deprecated and replaced by
mauModRpCompl2, which corrects an oversight by
allowing rpMauStatus to be implemented
read-only.
Required groups
| mandatory | mauRpGrpBasic | |
| optional | mauRpGrp100Mbs |
Implementation of this optional group is recommended for MAUs that have 100Mb/s or greater capability. |
| optional | mauRpGrpJack |
Implementation of this optional group is recommended for MAUs that have one or more external jacks. |
| optional | rpMauNotifications |
Implementation of this group is recommended for MAUs attached to repeater ports. |
OID
.1.3.6.1.2.1.26.6.1.1.2******** THIS COMPLIANCE IS DEPRECATED ********
Compliance for MAUs attached to interfaces.
This compliance is deprecated and replaced by
mauModIfCompl2.
Compliance for MAUs attached to interfaces.
This compliance is deprecated and replaced by
mauModIfCompl2.
Required groups
| mandatory | mauIfGrpBasic | |
| optional | mauIfGrp100Mbs |
Implementation of this optional group is recommended for MAUs that have 100Mb/s capability. |
| optional | mauIfGrpJack |
Implementation of this optional group is recommended for MAUs that have one or more external jacks. |
| optional | mauIfGrpAutoNeg |
Implementation of this group is mandatory for MAUs that support managed auto-negotiation. |
| optional | mauBroadBasic |
Implementation of this group is mandatory for broadband MAUs. |
| optional | ifMauNotifications |
Implementation of this group is recommended for MAUs attached to interfaces. |
OID
.1.3.6.1.2.1.26.6.1.1.3******** THIS COMPLIANCE IS DEPRECATED ********
Compliance for MAUs attached to interfaces.
This compliance is deprecated and replaced by
mauModIfCompl3.
Compliance for MAUs attached to interfaces.
This compliance is deprecated and replaced by
mauModIfCompl3.
Required groups
| mandatory | mauIfGrpBasic | |
| optional | mauIfGrpHighCapacity |
Implementation of this optional group is recommended for MAUs that have 100Mb/s or greater capability. |
| optional | mauIfGrpJack |
Implementation of this optional group is recommended for MAUs that have one or more external jacks. |
| optional | mauIfGrpAutoNeg2 |
Implementation of this group is mandatory for MAUs that support managed auto-negotiation. |
| optional | mauIfGrpAutoNeg1000Mbps |
Implementation of this group is mandatory for MAUs that have 1000Mb/s or greater capability and support managed auto-negotiation. |
| optional | ifMauNotifications |
Implementation of this group is recommended for MAUs attached to interfaces. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| ifMauStatus | readonly | Write access is not required. |
OID
.1.3.6.1.2.1.26.6.1.1.4Compliance for MAUs attached to repeater
ports.
Note that compliance with this compliance
statement requires compliance with the
snmpRptrModCompl MODULE-COMPLIANCE statement of
the SNMP-REPEATER-MIB (RFC 2108).
ports.
Note that compliance with this compliance
statement requires compliance with the
snmpRptrModCompl MODULE-COMPLIANCE statement of
the SNMP-REPEATER-MIB (RFC 2108).
Required groups
| mandatory | mauRpGrpBasic | |
| optional | mauRpGrp100Mbs |
Implementation of this optional group is recommended for MAUs that have 100Mb/s or greater capability. |
| optional | mauRpGrpJack |
Implementation of this optional group is recommended for MAUs that have one or more external jacks. |
| optional | rpMauNotifications |
Implementation of this group is recommended for MAUs attached to repeater ports. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| rpMauStatus | readonly | Write access is not required. |
OID
.1.3.6.1.2.1.26.6.1.1.5Compliance for MAUs attached to interfaces.
Note that compliance with this compliance
statement requires compliance with the
ifCompliance3 MODULE-COMPLIANCE statement of the
IF-MIB (RFC 2863) and the dot3Compliance2
MODULE-COMPLIANCE statement of the
EtherLike-MIB (RFC3635).
Note that compliance with this compliance
statement requires compliance with the
ifCompliance3 MODULE-COMPLIANCE statement of the
IF-MIB (RFC 2863) and the dot3Compliance2
MODULE-COMPLIANCE statement of the
EtherLike-MIB (RFC3635).
Required groups
| mandatory | mauIfGrpBasic | |
| optional | mauIfGrpHighCapacity |
Implementation of this optional group is recommended for MAUs that have 100Mb/s or greater capability. |
| optional | mauIfGrpHCStats |
Implementation of this group is mandatory for MAUs that have 1000Mb/s capacity, and is recommended for MAUs that have 100Mb/s capacity. |
| optional | mauIfGrpJack |
Implementation of this optional group is recommended for MAUs that have one or more external jacks. |
| optional | mauIfGrpAutoNeg2 |
Implementation of this group is mandatory for MAUs that support managed auto-negotiation. |
| optional | mauIfGrpAutoNeg1000Mbps |
Implementation of this group is mandatory for MAUs that have 1000Mb/s or greater capability and support managed auto-negotiation. |
| optional | ifMauNotifications |
Implementation of this group is recommended for MAUs attached to interfaces. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| ifMauStatus | readonly | Write access is not required. |
Notifications / Traps (2)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.2.1.26.0.1 |
This trap is sent whenever a managed repeater
MAU enters the jabber state. The agent MUST throttle the generation of consecutive rpMauJabberTraps so that there is at least a five-second gap between them. |
|
.1.3.6.1.2.1.26.0.2 |
This trap is sent whenever a managed interface
MAU enters the jabber state. The agent MUST throttle the generation of consecutive ifMauJabberTraps so that there is at least a five-second gap between them. |