ifMauDefaultType
MAU-MIB ·
.1.3.6.1.2.1.26.2.1.1.11
Object
This object identifies the default
administrative baseband MAU type to be used in
conjunction with the operational MAU type
denoted by ifMauType.
The set of possible values for this object is
the same as the set defined for the ifMauType
object.
This object represents the
administratively-configured type of the MAU. If
auto-negotiation is not enabled or is not
implemented for this MAU, the value of this
object determines the operational type of the
MAU. In this case, a set to this object will
force the MAU into the specified operating mode.
If auto-negotiation is implemented and enabled
for this MAU, the operational type of the MAU
is determined by auto-negotiation, and the value
of this object denotes the type to which the MAU
will automatically revert if/when
auto-negotiation is later disabled.
NOTE TO IMPLEMENTORS: It may be necessary to
provide for underlying hardware implementations
which do not follow the exact behavior specified
above. In particular, when
ifMauAutoNegAdminStatus transitions from enabled
to disabled, the agent implementation MUST
ensure that the operational type of the MAU (as
reported by ifMauType) correctly transitions to
the value specified by this object, rather than
continuing to operate at the value earlier
determined by the auto-negotiation function.
Context
- MIB
- MAU-MIB
- OID
.1.3.6.1.2.1.26.2.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ifMauEntry
- Table
- ifMauTable
- Siblings
- 13
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifMauIfIndex This variable uniquely identifies the interface
to which the MAU described by this entry is
connected. | column | IF-MIBInterfaceIndex | .1.3.6.1.2.1.26.2.1.1.1 |
| ifMauTypeList deprecated ********* THIS OBJECT IS DEPRECATED **********
This object has been deprecated in favour of
ifMauTypeListBits.
A value that uniquely identifies the s… | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.26.2.1.1.10 |
| ifMauAutoNegSupported This object indicates whether or not
auto-negotiation is supported on this MAU. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.26.2.1.1.12 |
| ifMauTypeListBits A value that uniquely identifies the set of
possible IEEE 802.3 types that the MAU could be.
If auto-negotiation is present on this MAU, this
object will map to ifMauAutoNegCapabi… | column | IANA-MAU-MIBIANAifMauTypeListBits | .1.3.6.1.2.1.26.2.1.1.13 |
| ifMauHCFalseCarriers A count of the number of false carrier events
during IDLE in 100BASE-X and 1000BASE-X links.
For all other MAU types, this counter will
always indicate zero. This … | column | SNMPv2-SMICounter64 | .1.3.6.1.2.1.26.2.1.1.14 |
| ifMauIndex This variable uniquely identifies the MAU
described by this entry from among other MAUs
connected to the same interface (ifMauIfIndex). | column | Integer32 | .1.3.6.1.2.1.26.2.1.1.2 |
| ifMauType This object identifies the MAU type. Values for
standard IEEE 802.3 MAU types are defined in the
IANA maintained IANA-MAU-MIB module, as
OBJECT-IDENTITIES of dot3MauType.
If the … | column | SNMPv2-TCAutonomousType | .1.3.6.1.2.1.26.2.1.1.3 |
| ifMauStatus The current state of the MAU. This object MAY
be implemented as a read-only object by those
agents and MAUs that do not implement software
control of the MAU state. Some agents … | column | Enumeration | .1.3.6.1.2.1.26.2.1.1.4 |
| ifMauMediaAvailable This object identifies Media Available state of
the MAU, complementary to the ifMauStatus. Values
for the standard IEEE 802.3 Media Available states
are defined in the IANA maint… | column | IANA-MAU-MIBIANAifMauMediaAvailable | .1.3.6.1.2.1.26.2.1.1.5 |
| ifMauMediaAvailableStateExits A count of the number of times that
ifMauMediaAvailable for this MAU instance leaves
the state available(3).
Discontinuities in the value of this counter can
occur … | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.26.2.1.1.6 |
| ifMauJabberState The value other(1) is returned if the jabber
state is not 2, 3, or 4. The agent MUST always
return other(1) for MAU type dot3MauTypeAUI.
The value unknown(2) is re… | column | Enumeration | .1.3.6.1.2.1.26.2.1.1.7 |
| ifMauJabberingStateEnters A count of the number of times that
mauJabberState for this MAU instance enters the
state jabbering(4). This counter will always
indicate zero for MAUs of type dot3MauTypeAUI
and… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.26.2.1.1.8 |
| ifMauFalseCarriers A count of the number of false carrier events
during IDLE in 100BASE-X and 1000BASE-X links.
For all other MAU types, this counter will
always indicate zero. This … | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.26.2.1.1.9 |