portDevIwfEtherType
LUM-PORTDEVICE-MIB ·
.1.3.6.1.4.1.8708.2.57.2.5.1.1.17
Object
column
r/w
Enumeration
Specifies the ether type of the VLAN.
qTag0x8100 - 802.1Q
sTag0x88a8 - 802.1ad Service tag
Context
- MIB
- LUM-PORTDEVICE-MIB
- OID
.1.3.6.1.4.1.8708.2.57.2.5.1.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- portDevIwfEntry
- Table
- portDevIwfTable
- Siblings
- 24
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | qTag0x8100 |
2 | sTag0x88a8 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portDevIwfIndex An arbitrary index assigned to each
port device entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.57.2.5.1.1.1 |
| portDevIwfNoTdmPayload This alarm is generated when the device receives a packet stream
with the L-bit set in the Control Word. This bit is set in the far end
upon a LOS/LOF/AIS condition. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.57.2.5.1.1.10 |
| portDevIwfRemotePacketLost Remote Packet Lost. Remote end is sending packets
but is not recieving any. Local encapsulation may be
disabled or local destination MAC address may be wrong
or packets are blocke… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.57.2.5.1.1.11 |
| portDevIwfLocalPacketLost Local Packet Lost. No packets are received.
Remote encapsulation may be disabled or
remote destination MAC address may be wrong
or packets are blocked or dropped in network. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.57.2.5.1.1.12 |
| portDevIwfAdminStatus The administrative state of the port device IWF.
down - The device should be inactive.
Alarms are suppressed.
up - The device should be activated whe… | column | LUM-TCAdminStatus | .1.3.6.1.4.1.8708.2.57.2.5.1.1.13 |
| portDevIwfOperStatus The operational state of the IWF.
notPresent - The physical resources are not
available.
down - The interface is de-activated or the are
faults preve… | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.57.2.5.1.1.14 |
| portDevIwfDescr User configurable label for the port device iwf. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.57.2.5.1.1.15 |
| portDevIwfSignalFormat The signal format. | column | Enumeration | .1.3.6.1.4.1.8708.2.57.2.5.1.1.16 |
| portDevIwfVlanId User specified VLAN ID, used to map E1 channel to Vlan.
If no VLAN ID is specified then VLAN ID 0 is assumed. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.57.2.5.1.1.18 |
| portDevIwfVlanPriority Priority for the Vlan. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.57.2.5.1.1.19 |
| portDevIwfName The management name of the IWF entry. The generated name
can for example be 'iSFP:1:2:1-2'where the numbers after
'iSFP:' indicate the port the device is created for. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.57.2.5.1.1.2 |
| portDevIwfE1ChannelId User specified ChannelId, used to map E1 channel to Vlan.
If no Channel ID is specified then 0 is assumed. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.57.2.5.1.1.20 |
| portDevIwfE1ChannelKLM K,L,M numbering indicates a fixed mapping of a physical IWF-channel
to each VC12. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.57.2.5.1.1.21 |
| portDevIwfDestMacAddress The destination MAC address inserted into the transmitted packets. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.8708.2.57.2.5.1.1.22 |
| portDevIwfTributaryUnitAlarm alarm: An TU-AIS signal is detected.
ok: The TU-AIS is cleared. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.57.2.5.1.1.23 |
| portDevIwfMultiplexSectionAlarm alarm: An MS-AIS signal is detected.
ok: The MS-AIS is cleared. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.57.2.5.1.1.24 |
| portDevIwfMultiplexSectionRDI alarm: An MS-RDI signal is detected.
ok: The MS-RDI is cleared. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.57.2.5.1.1.25 |
| portDevIwfRtpClockSource The clock source expected to be used for the Real-Time Protocol header timestamps. | column | Enumeration | .1.3.6.1.4.1.8708.2.57.2.5.1.1.3 |
| portDevIwfJitterBufferRecenter Function to re-center position of jitter buffer. Setting of this
object triggers recentering of the jitter buffer to the default position.
Recentering the jitter bu… | column | Enumeration | .1.3.6.1.4.1.8708.2.57.2.5.1.1.4 |
| portDevIwfInternalReference For internal use only. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.57.2.5.1.1.5 |
| portDevIwfLocalPortIndex The index of the port that this device is connected to. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.57.2.5.1.1.6 |
| portDevIwfLossOfSignal Loss of signal.
Applicable for all signal formats.
A(ctivation): Active loss of signal HW
indication.
D(e-activation): Inactive loss of signal HW
ind… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.57.2.5.1.1.7 |
| portDevIwfLossOfFrame Loss of frame. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.57.2.5.1.1.8 |
| portDevIwfEquipmentFailure Equipment failure. Catastrophic failure of the
hardware of the iSFP device. Replace the faulty hardware. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.57.2.5.1.1.9 |