LUM-PORTDEVICE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

131

portDevGenericTable

table

.1.3.6.1.4.1.8708.2.57.2.2.1 · 1 row entry · 10 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk portDevGenericTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PORTDEVICE-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PORTDEVICE-MIB::portDevGenericTable'

The generic list.

portDevGenericEntry row .1.3.6.1.4.1.8708.2.57.2.2.1.1

An entry in the generic list.

Indexes

portDevGenericIndex

Column	Syntax	OID
portDevGenericIndex An arbitrary index assigned to each entry.	Unsigned32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.8708.2.57.2.2.1.1.1`
portDevGenericName The management name of the interface, for example 'generic:1:2', where the first number indicates subrack, the second slot number.	LUM-TCMgmtNameString Type Constraints: `range: 0..255` Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	`.1.3.6.1.4.1.8708.2.57.2.2.1.1.2`
portDevGenericSubrack The subrack that this port device belongs to.	Unsigned32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.8708.2.57.2.2.1.1.3`
portDevGenericSlot The slot that this port device belongs to.	Unsigned32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.8708.2.57.2.2.1.1.4`
portDevGenericAutoDiscoverInterval Interval at which the auto discovery of port devices runs. 0 to disable auto discovery. The auto discover interval is configured for all port devices of the board. Unit: second.	Unsigned32r/w Constraints: `range: 0-300`	`.1.3.6.1.4.1.8708.2.57.2.2.1.1.5`
portDevGenericCreateNewPortDevice Internal command for creating a port device. Device type - type of port device to be created. Port - port of the EMXP board on which to add a port device. VLAN ID - VLAN ID prepended. (NID-GE only) T…	LUM-TCCommandString Description: tbd	`.1.3.6.1.4.1.8708.2.57.2.2.1.1.6`
portDevGenericRestartPortDevice Internal command for restarting a port device. Port device - select the device to restart. Restart type - type of restart. Cold Traffic disturbing restart. Warm Non-traffic disturbing…	LUM-TCCommandString Description: tbd	`.1.3.6.1.4.1.8708.2.57.2.2.1.1.7`
portDevGenericCreateMep Command for creating a Mep object. MEG - Identifies to which Meg the Mep will be added. Mep type - Local or Remote. MEP identifier - Identifier for the Mep (range 1-8191) Portdevice - The selected Portd…	LUM-TCCommandString Description: tbd	`.1.3.6.1.4.1.8708.2.57.2.2.1.1.8`
portDevGenericCreateMeg Create and associate a MEG (MAID) for a Portdevice Identifier - A unique user defined identifier for the MEG. Level - Maintenance domain level. CCM interval - Interval betwee…	LUM-TCCommandString Description: tbd	`.1.3.6.1.4.1.8708.2.57.2.2.1.1.9`
portDevGenericCreateNewPortDeviceAdvanced Internal command for creating a port device. Device type - type of port device to be created. Port - port of the EMXP board on which to add a port device. VLAN ID - VLAN ID prepended. (NID-GE only) Admi…	LUM-TCCommandString Description: tbd	`.1.3.6.1.4.1.8708.2.57.2.2.1.1.10`

portDevEquipmentTable

table

.1.3.6.1.4.1.8708.2.57.2.3.1 · 1 row entry · 35 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk portDevEquipmentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PORTDEVICE-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PORTDEVICE-MIB::portDevEquipmentTable'

The equipment list.

portDevEquipmentEntry row .1.3.6.1.4.1.8708.2.57.2.3.1.1

An entry in the board list.
One entry for each slot.

Indexes

portDevEquipmentIndex

Column Syntax OID

portDevEquipmentIndex

An arbitrary index assigned to each
port device entry.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.57.2.3.1.1.1

portDevEquipmentName

The name of the port device, for example 'nidGe:1:2:1-2:1'
where the four numbers indicate in which physical port that
the port device is add to and the last number indicates the VLAN ID.

The generated na…

LUM-TCMgmtNameString

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.57.2.3.1.1.2

portDevEquipmentDescr

User configurable label for the port device.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.57.2.3.1.1.3

portDevEquipmentLocation

The location of the port device.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.57.2.3.1.1.4

portDevEquipmentAdminStatus

The administrative state of the port device.

down - The device should be inactive.
Alarms are suppressed.

up - The device should be activated when
it becomes available. Alarms are not suppr…

LUM-TCAdminStatusr/w

Type Values:

1	down
2	up

Description:

The administrative state with only up and down.

down - The interface should be inactive.

up - The interface should be activated.

.1.3.6.1.4.1.8708.2.57.2.3.1.1.5

portDevEquipmentOperStatus

The operational state of the port device.

notPresent - The physical resources are not
available.

down - The interface is de-activated or the are
faults preventing it from going to the 'up'-…

LUM-TCBoardOrInterfaceOperStatus

Type Values:

1	notPresent
2	down
3	up

Description:

The operational state for a board or interface.

notPresent - The board/interface is not available.

down - The board/interface is de-activated or
there are faults preventing it from going to the
'up…

.1.3.6.1.4.1.8708.2.57.2.3.1.1.6

portDevEquipmentExpectedType

The expected port device type.

PortDeviceEquipmentTyper/w

Type Values:

0	undefined
1	nidGe
2	iSfp155
3	iSfp622
4	iSfpVc12
5	iSfp2488
6	iSfpE1

Description:

The functional type of the port device.
At least one type is defined for each combination of
the following properties of the port device:

1 - number of interfaces

2 - type of interfaces

…

.1.3.6.1.4.1.8708.2.57.2.3.1.1.7

portDevEquipmentActualType

The actual device type. If an unexpected device
has been detected this variable can be used to
see what type of board has been detected.

PortDeviceEquipmentType

Type Values:

0	undefined
1	nidGe
2	iSfp155
3	iSfp622
4	iSfpVc12
5	iSfp2488
6	iSfpE1

Description:

The functional type of the port device.
At least one type is defined for each combination of
the following properties of the port device:

1 - number of interfaces

2 - type of interfaces

…

.1.3.6.1.4.1.8708.2.57.2.3.1.1.8

portDevEquipmentFwVersion

The version of the firmware installed on port device.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.57.2.3.1.1.9

portDevEquipmentFwUpgradeStatus

The progress status of the firmware installation and activation.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.57.2.3.1.1.10

portDevEquipmentLinkPassThrough

Indicates whether Link Pass-Through is enabled, i.e. whether the
other interface of the Two-Port MAC Relay relays defects to this
interface.

LUM-TCEnableDisabler/w

Type Values:

1	disabled
2	enabled

Description:

Represents a boolean value.

.1.3.6.1.4.1.8708.2.57.2.3.1.1.11

portDevEquipmentSubrack

The number of the subrack where the port device is
located.

LUM-TCSubrackNumberr/w

Type Constraints:
range: 0..15

Description:

The number of a subrack within a network element.

0 signifies an undefined subrack number.

.1.3.6.1.4.1.8708.2.57.2.3.1.1.12

portDevEquipmentSlot

The slot where the port device is located.

LUM-TCSlotNumberr/w

Type Constraints:
range: 0..22

Description:

The number of a slot within a subrack.

0 signifies an undefined slot number.

.1.3.6.1.4.1.8708.2.57.2.3.1.1.13

portDevEquipmentVlanId

User specified VLAN ID, which is last number in the
port device ID.
If no VLAN ID is specified then VLAN ID 0 is assumed.

Unsigned32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.8708.2.57.2.3.1.1.14

portDevEquipmentRowStatus

Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.8708.2.57.2.3.1.1.15

portDevEquipmentNoDeviceFound

There is no device present where the expected device
type is defined.

A(ctivation): Absence of expected device.

D(e-activation): Insert expected device.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…

.1.3.6.1.4.1.8708.2.57.2.3.1.1.16

portDevEquipmentMultiDeviceFound

There is more than one device present where the
expected device type is defined.

A(ctivation): More than one device is detected.

D(e-activation): One device is found or no device
is present.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.57.2.3.1.1.17

portDevEquipmentDeviceNotManageable

The firmware on the device is not supported
by the current software version.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.57.2.3.1.1.18

portDevEquipmentDeviceNotReachable

The portdevice is not reachable by the traffic unit.

A(ctivation): When the traffic unit loses contact with the
port device.

D(e-activation): When the connection is restored.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.57.2.3.1.1.19

portDevEquipmentConfigurationFault

The configuration stage of the portdevice setup
did not successfully finish.

A(ctivation): Configuration failure.

D(e-activation): Configuration successful.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.57.2.3.1.1.20

portDevEquipmentPowerAMissing

Lost connection to power module A

A(ctivation): When the port device loses contact with the
power module A.

D(e-activation): When the connection is restored.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.57.2.3.1.1.21

portDevEquipmentPowerBMissing

Lost connection to power module B

A(ctivation): When the port device loses contact with the
power module B.

D(e-activation): When the connection is restored.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.57.2.3.1.1.22

portDevEquipmentInternalReference

For internal use only.

Unsigned32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.8708.2.57.2.3.1.1.23

portDevEquipmentMacAddress

The mac address of the port device.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.57.2.3.1.1.24

portDevEquipmentLocalPortIndex

The index of the port that this device is connected to.

Unsigned32r/w

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.57.2.3.1.1.25

portDevEquipmentAdminPowerA

Alarms relating to power module A
are suppressed.

down - Alarms relating to power module A
are suppressed.

LUM-TCAdminStatusr/w

Type Values:

1	down
2	up

Description:

The administrative state with only up and down.

down - The interface should be inactive.

up - The interface should be activated.

.1.3.6.1.4.1.8708.2.57.2.3.1.1.26

portDevEquipmentAdminPowerB

Alarms relating to power module B
are suppressed.

down - Alarms relating to power module B
are suppressed.

LUM-TCAdminStatusr/w

Type Values:

1	down
2	up

Description:

The administrative state with only up and down.

down - The interface should be inactive.

up - The interface should be activated.

.1.3.6.1.4.1.8708.2.57.2.3.1.1.27

portDevEquipmentSelectedPort

Selected active port on the customer interface of the nid.
Alarms on non selected ports are suppressed.

PortSelectionr/w

Type Values:

0	cifa
1	cifb
2	auto

Description:

Selection of active port and alarm suppression
Auto(0) Active port is automatically selected
based on LOS.
CifA(1) CifA active port (Optical),
alarms for CifB …

.1.3.6.1.4.1.8708.2.57.2.3.1.1.28

portDevEquipmentDestMacAddressdeprecated

The destination MAC address inserted into the transmitted packets.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.8708.2.57.2.3.1.1.29

portDevEquipmentDestMacAddressCheck

If enabled, for each received packet the destination MAC address
is compared with the device MAC address. In case the addresses
are not equal, the packet is not processed.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.8708.2.57.2.3.1.1.30

portDevEquipmentDeviceVersionType

The device version type. This variable can be used to
see what version of the board has been detected.

PortDeviceVersionType

Type Values:

0	undefined
1	tpmrPmR11S
3	ex12NidR22S
4	tsop155GeConvPmR12
5	tsop622GeConvPmR12
8	tpmrPmR15RespS
10	tpmrPmR15InitS
11	ex14NidR10S
12	tpmrPmR11L
24	tsop155GeConvPmR15
25	tsop622GeConvPmR15
31	ex14NidR20S
32	ex14NidR40S
258	tsopStm1eGeConvPmR15
259	tpmrPmR20TranspS

Description:

The version type of the port device.
undefined (0), -- Device type unknown
tpmrPmR11S (1), -- Service OAM Smart SFP
ex12NidR22S (3), -- EX12 Transport NID
tsop155GeConvPmR12 (4), -- Transparant SONET/SDH over Packet (TS…

.1.3.6.1.4.1.8708.2.57.2.3.1.1.31

portDevEquipmentActivePort

Active port on the customer interface of the nid.
Alarms on non selected ports are suppressed.

PortSelection

Type Values:

0	cifa
1	cifb
2	auto

Description:

Selection of active port and alarm suppression
Auto(0) Active port is automatically selected
based on LOS.
CifA(1) CifA active port (Optical),
alarms for CifB …

.1.3.6.1.4.1.8708.2.57.2.3.1.1.32

portDevEquipmentDyingGasp

A Dying Gasp is signalled when power is going to be lost on the device. This could possibly indicate a power loss.

A(ctivation): A Dying Gasp was received

D(e-activation): Communication wit…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.57.2.3.1.1.33

portDevEquipmentLosCsf

Indicates whether Los Csf is enabled.

LUM-TCEnableDisabler/w

Type Values:

1	disabled
2	enabled

Description:

Represents a boolean value.

.1.3.6.1.4.1.8708.2.57.2.3.1.1.34

portDevEquipmentTdmFrameMode

Indicates the TDM frame mode for frames monitoring.
unframed -- Frames pass without monitoring of the content within the frames
framedMode -- The iSFP-E1 monitors FAS to detect LOF defect
framedMod…

TDMframeModer/w

Type Values:

0	unframed
1	framedMode
2	framedModeWithCRC

Description:

The E1 TPoP can operate in 3 different monitoring modes,
to non-intrusively mpnitor the incomming E1 signal

.1.3.6.1.4.1.8708.2.57.2.3.1.1.35

portDevFwTable

table

.1.3.6.1.4.1.8708.2.57.2.4.1 · 1 row entry · 17 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk portDevFwTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PORTDEVICE-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PORTDEVICE-MIB::portDevFwTable'

The firmware list.

portDevFwEntry row .1.3.6.1.4.1.8708.2.57.2.4.1.1

An entry in the firmware list.

Indexes

portDevFwIndex

Column Syntax OID

portDevFwIndex

An arbitrary index assigned to each entry.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.57.2.4.1.1.1

portDevFwSubrack

The subrack that the port device belongs to.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.57.2.4.1.1.2

portDevFwSlot

The slot that the port device belongs to.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.57.2.4.1.1.3

portDevFwName

The name of the firmware entry, same as the port device name
where the firmware is stored.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.57.2.4.1.1.4

portDevFwPortDevId

An arbitrary index(aka sdId) assigned to the local device
entry, where the firmware is stored in.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.57.2.4.1.1.5

portDevFwImgSlotOneNr

The slot number of the stored firmware.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.57.2.4.1.1.6

portDevFwImgSlotOneVersion

The version of the firmware that is in slot one.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.57.2.4.1.1.7

portDevFwImgSlotOneState

The state of the firmware that is in slot one.

PortDevFwImgState

Type Values:

0	unknown
1	inactive
2	active
3	empty

Description:

The states of the firware image on port device.
unknown - Can not get image information from port device
inactive - Image stored but not activated
active - Image stored and activated
empty - No image stored

.1.3.6.1.4.1.8708.2.57.2.4.1.1.8

portDevFwImgSlotOneDate

The date of the firmware that is in slot one.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.57.2.4.1.1.9

portDevFwImgSlotTwoNr

The slot number of the stored firmware.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.57.2.4.1.1.10

portDevFwImgSlotTwoVersion

The version of the firmware that is in slot two.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.57.2.4.1.1.11

portDevFwImgSlotTwoState

The state of the firmware that is in slot two.

PortDevFwImgState

Type Values:

0	unknown
1	inactive
2	active
3	empty

Description:

.1.3.6.1.4.1.8708.2.57.2.4.1.1.12

portDevFwImgSlotTwoDate

The date of the firmware that is in slot two.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.57.2.4.1.1.13

portDevFwInstallFw

Install firmware on a port device.

Portdevice - Select the portdevice to upgrade

The Active/Inactive sections show information about firmware
available in the two software memory banks,
the…

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.57.2.4.1.1.14

portDevFwActivateFw

Activate a firmware on a device.

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.57.2.4.1.1.15

portDevFwGetAllFiles

List all availabe firmware files on the board.

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.57.2.4.1.1.16

portDevFwUpgradeStatus

The status of the firmware installation and activation.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.57.2.4.1.1.17

portDevIwfTable

table

.1.3.6.1.4.1.8708.2.57.2.5.1 · 1 row entry · 27 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk portDevIwfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PORTDEVICE-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PORTDEVICE-MIB::portDevIwfTable'

The iwf port device list.

portDevIwfEntry row .1.3.6.1.4.1.8708.2.57.2.5.1.1

An entry in the board list.
One entry for each slot.

Indexes

portDevIwfIndex

Column Syntax OID

portDevIwfIndex

An arbitrary index assigned to each
port device entry.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.57.2.5.1.1.1

portDevIwfName

The management name of the IWF entry. The generated name
can for example be 'iSFP:1:2:1-2'where the numbers after
'iSFP:' indicate the port the device is created for.

LUM-TCMgmtNameString

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.57.2.5.1.1.2

portDevIwfRtpClockSource

The clock source expected to be used for the Real-Time Protocol header timestamps.

Enumerationr/w

Enumerated Values:

1	ethernet
2	tdm

.1.3.6.1.4.1.8708.2.57.2.5.1.1.3

portDevIwfJitterBufferRecenter

Function to re-center position of jitter buffer. Setting of this
object triggers recentering of the jitter buffer to the default position.

Recentering the jitter buffer is a service-affecting operation.
…

Enumerationr/w

Enumerated Values:

1	normal
2	recenter

.1.3.6.1.4.1.8708.2.57.2.5.1.1.4

portDevIwfInternalReference

For internal use only.

Unsigned32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.8708.2.57.2.5.1.1.5

portDevIwfLocalPortIndex

The index of the port that this device is connected to.

Unsigned32r/w

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.57.2.5.1.1.6

portDevIwfLossOfSignal

Loss of signal.
Applicable for all signal formats.

A(ctivation): Active loss of signal HW
indication.

D(e-activation): Inactive loss of signal HW
indication.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.57.2.5.1.1.7

portDevIwfLossOfFrame

Loss of frame.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.57.2.5.1.1.8

portDevIwfEquipmentFailure

Equipment failure. Catastrophic failure of the
hardware of the iSFP device. Replace the faulty hardware.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.57.2.5.1.1.9

portDevIwfNoTdmPayload

This alarm is generated when the device receives a packet stream
with the L-bit set in the Control Word. This bit is set in the far end
upon a LOS/LOF/AIS condition.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.57.2.5.1.1.10

portDevIwfRemotePacketLost

Remote Packet Lost. Remote end is sending packets
but is not recieving any. Local encapsulation may be
disabled or local destination MAC address may be wrong
or packets are blocked or dropped in network.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.57.2.5.1.1.11

portDevIwfLocalPacketLost

Local Packet Lost. No packets are received.
Remote encapsulation may be disabled or
remote destination MAC address may be wrong
or packets are blocked or dropped in network.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.57.2.5.1.1.12

portDevIwfAdminStatus

The administrative state of the port device IWF.

down - The device should be inactive.
Alarms are suppressed.

up - The device should be activated when
it becomes available. Alarms are not s…

LUM-TCAdminStatusr/w

Type Values:

1	down
2	up

Description:

The administrative state with only up and down.

down - The interface should be inactive.

up - The interface should be activated.

.1.3.6.1.4.1.8708.2.57.2.5.1.1.13

portDevIwfOperStatus

The operational state of the IWF.

notPresent - The physical resources are not
available.

down - The interface is de-activated or the are
faults preventing it from going to the 'up'-state.
…

LUM-TCBoardOrInterfaceOperStatus

Type Values:

1	notPresent
2	down
3	up

Description:

.1.3.6.1.4.1.8708.2.57.2.5.1.1.14

portDevIwfDescr

User configurable label for the port device iwf.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.57.2.5.1.1.15

portDevIwfSignalFormat

The signal format.

Enumeration

Enumerated Values:

1	other
2	stm1
3	stm4
4	stm16
39	e1

.1.3.6.1.4.1.8708.2.57.2.5.1.1.16

portDevIwfEtherType

Specifies the ether type of the VLAN.

qTag0x8100 - 802.1Q
sTag0x88a8 - 802.1ad Service tag

Enumerationr/w

Enumerated Values:

1	qTag0x8100
2	sTag0x88a8

.1.3.6.1.4.1.8708.2.57.2.5.1.1.17

portDevIwfVlanId

User specified VLAN ID, used to map E1 channel to Vlan.
If no VLAN ID is specified then VLAN ID 0 is assumed.

Unsigned32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.8708.2.57.2.5.1.1.18

portDevIwfVlanPriority

Priority for the Vlan.

Unsigned32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.8708.2.57.2.5.1.1.19

portDevIwfE1ChannelId

User specified ChannelId, used to map E1 channel to Vlan.
If no Channel ID is specified then 0 is assumed.

Unsigned32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.8708.2.57.2.5.1.1.20

portDevIwfE1ChannelKLM

K,L,M numbering indicates a fixed mapping of a physical IWF-channel
to each VC12.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.57.2.5.1.1.21

portDevIwfDestMacAddress

The destination MAC address inserted into the transmitted packets.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.8708.2.57.2.5.1.1.22

portDevIwfTributaryUnitAlarm

alarm: An TU-AIS signal is detected.
ok: The TU-AIS is cleared.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.57.2.5.1.1.23

portDevIwfMultiplexSectionAlarm

alarm: An MS-AIS signal is detected.
ok: The MS-AIS is cleared.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.57.2.5.1.1.24

portDevIwfMultiplexSectionRDI

alarm: An MS-RDI signal is detected.
ok: The MS-RDI is cleared.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.57.2.5.1.1.25

portDevIwfRemoteDefectIndication

alarm: An RDI signal is detected on E1 interface.
ok: The RDI signal is cleared.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.57.2.5.1.1.26

portDevIwfAlarmIndicationSignal

alarm: An AIS signal is detected on E1 interface.
ok: The AIS signal is cleared.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.57.2.5.1.1.27

portDevIwfPmTable

table

.1.3.6.1.4.1.8708.2.57.2.6.1 · 1 row entry · 42 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk portDevIwfPmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PORTDEVICE-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PORTDEVICE-MIB::portDevIwfPmTable'

A table containing the counters of IWF channels of the iSFP.

portDevIwfPmEntry row .1.3.6.1.4.1.8708.2.57.2.6.1.1

A list of objects containing the counters of an IWF channel.

Indexes

portDevIwfPmIndex

Column Syntax OID

portDevIwfPmIndex

An arbitrary index assigned to each entry.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.57.2.6.1.1.1

portDevIwfPmName

The management name of the IWF PM entry. The generated name
can for example be 'iSFP:1:2:1-2'where the numbers after
'iSFP:' indicate the port the device is created for.

LUM-TCMgmtNameString

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.57.2.6.1.1.2

portDevIwfPmRxPackets

Number of received packets.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.3

portDevIwfPmTxPackets

Number of transmitted packets.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.4

portDevIwfPmMalformedPackets

Number of malformed packets.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.5

portDevIwfPmReorderedPackets

Number of reordered packets.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.6

portDevIwfPmMisorderedDroppedPackets

Number of dropped misordered packets.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.7

portDevIwfPmMissingPackets

Number of missing packets.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.8

portDevIwfPmPlayedOutPackets

Number of packets of which TDM payload is transmitted as received.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.9

portDevIwfPmJbOverrun

Number of jitter buffer overrun packets.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.10

portDevIwfPmJbUnderrun

Number of jitter buffer underrun packets.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.11

portDevIwfPmReset

Setting of this object to 'reset' invokes a reset of the counters
for this IWF channel.

This object is merely used to invoke a reset, and its actual
value has no meaning.

Enumerationr/w

Enumerated Values:

1	normal
2	reset

.1.3.6.1.4.1.8708.2.57.2.6.1.1.12

portDevIwfPmInternalReference

For internal use only.

Unsigned32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.8708.2.57.2.6.1.1.13

portDevIwfPmE1ChannelId

User specified ChannelId, used to map E1 channel to Vlan.
If no Channel ID is specified then 0 is assumed.

Unsigned32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.8708.2.57.2.6.1.1.14

portDevIwfPmSubrack

The subrack that this port device belongs to.

LUM-TCSubrackNumberr/w

Type Constraints:
range: 0..15

Description:

The number of a subrack within a network element.

0 signifies an undefined subrack number.

.1.3.6.1.4.1.8708.2.57.2.6.1.1.15

portDevIwfPmSlot

The subrack that this port device belongs to.

LUM-TCSlotNumberr/w

Type Constraints:
range: 0..22

Description:

The number of a slot within a subrack.

0 signifies an undefined slot number.

.1.3.6.1.4.1.8708.2.57.2.6.1.1.16

portDevIwfPmIfNo

The interface number of the port where the port device is located.

LUM-TCPortNumberr/w

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.57.2.6.1.1.17

portDevIwfPmTxPort

The number of the TX port for the interface.

LUM-TCPortNumberr/w

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.57.2.6.1.1.18

portDevIwfPmRxPort

The number of the RX port for the interface.

LUM-TCPortNumberr/w

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.57.2.6.1.1.19

portDevIwfPmReportMode

The mode for PM reporting to file on the IWF interface.

off - PM reporting is inactive.

on - PM reporting is activated.

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.8708.2.57.2.6.1.1.20

portDevIwfPmIsSuspect15m

This variable indicates if the data for this
IWF is suspect. The current interval may
for example only contain measurements for a part of
the interval.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.8708.2.57.2.6.1.1.21

portDevIwfPmIsSuspect24h

This variable indicates if the data for this
IWF is suspect. The current interval may
for example only contain measurements for a part of
the interval.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.8708.2.57.2.6.1.1.22

portDevIwfPmReset15m

Reset the 15 minutes IWF counters.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set reset15m reset

Enumerationr/w

Enumerated Values:

1	normal
2	reset

.1.3.6.1.4.1.8708.2.57.2.6.1.1.23

portDevIwfPmReset24h

Reset the 24 hours IWF counters.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set reset24h reset

Enumerationr/w

Enumerated Values:

1	normal
2	reset

.1.3.6.1.4.1.8708.2.57.2.6.1.1.24

portDevIwfPmRxPackets15m

Number of received packets in 15m interval.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.25

portDevIwfPmTxPackets15m

Number of transmitted packets in 15m interval.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.26

portDevIwfPmMalformedPackets15m

Number of malformed packets in 15m interval.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.27

portDevIwfPmReorderedPackets15m

Number of reordered packets in 15m interval.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.28

portDevIwfPmMisorderedDroppedPackets15m

Number of dropped misordered packets in 15m interval.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.29

portDevIwfPmMissingPackets15m

Number of missing packets in 15m interval.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.30

portDevIwfPmPlayedOutPackets15m

Number of packets of which TDM payload is transmitted as received in 15m interval.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.31

portDevIwfPmJbOverrun15m

Number of jitter buffer overrun packetsin 15m interval.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.32

portDevIwfPmJbUnderrun15m

Number of jitter buffer underrun packets in 15m interval.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.33

portDevIwfPmRxPackets24h

Number of received packets in 24h interval.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.34

portDevIwfPmTxPackets24h

Number of transmitted packets in 24h interval.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.35

portDevIwfPmMalformedPackets24h

Number of malformed packets in 24h interval.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.36

portDevIwfPmReorderedPackets24h

Number of reordered packets in 24h interval.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.37

portDevIwfPmMisorderedDroppedPackets24h

Number of dropped misordered packets in 24h interval.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.38

portDevIwfPmMissingPackets24h

Number of missing packets in 24h interval.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.39

portDevIwfPmPlayedOutPackets24h

Number of packets of which TDM payload is transmitted as received in 24h interval.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.40

portDevIwfPmJbOverrun24h

Number of jitter buffer overrun packetsin 24h interval.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.41

portDevIwfPmJbUnderrun24h

Number of jitter buffer underrun packets in 24h interval.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.8708.2.57.2.6.1.1.42