portDevEquipmentSlot
LUM-PORTDEVICE-MIB ·
.1.3.6.1.4.1.8708.2.57.2.3.1.1.13
Object
The slot where the port device is located.
Context
- MIB
- LUM-PORTDEVICE-MIB
- OID
.1.3.6.1.4.1.8708.2.57.2.3.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- portDevEquipmentEntry
- Table
- portDevEquipmentTable
- Siblings
- 33
Values & Constraints
Type Constraints
range: 0..22
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portDevEquipmentIndex An arbitrary index assigned to each
port device entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.57.2.3.1.1.1 |
| portDevEquipmentFwUpgradeStatus The progress status of the firmware installation and activation. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.57.2.3.1.1.10 |
| portDevEquipmentLinkPassThrough Indicates whether Link Pass-Through is enabled, i.e. whether the
other interface of the Two-Port MAC Relay relays defects to this
interface. | column | LUM-TCEnableDisable | .1.3.6.1.4.1.8708.2.57.2.3.1.1.11 |
| portDevEquipmentSubrack The number of the subrack where the port device is
located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.57.2.3.1.1.12 |
| portDevEquipmentVlanId User specified VLAN ID, which is last number in the
port device ID.
If no VLAN ID is specified then VLAN ID 0 is assumed. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.57.2.3.1.1.14 |
| portDevEquipmentRowStatus Manages creation and deletion of conceptual rows.
See also SNMPv2-TC. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8708.2.57.2.3.1.1.15 |
| portDevEquipmentNoDeviceFound There is no device present where the expected device
type is defined.
A(ctivation): Absence of expected device.
D(e-activation): Insert expected devi… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.57.2.3.1.1.16 |
| portDevEquipmentMultiDeviceFound There is more than one device present where the
expected device type is defined.
A(ctivation): More than one device is detected.
D(e-activation): One… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.57.2.3.1.1.17 |
| portDevEquipmentDeviceNotManageable The firmware on the device is not supported
by the current software version. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.57.2.3.1.1.18 |
| portDevEquipmentDeviceNotReachable The portdevice is not reachable by the traffic unit.
A(ctivation): When the traffic unit loses contact with the
port device.
D(e-activation): When th… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.57.2.3.1.1.19 |
| portDevEquipmentName The name of the port device, for example 'nidGe:1:2:1-2:1'
where the four numbers indicate in which physical port that
the port device is add to and the last number indicates the … | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.57.2.3.1.1.2 |
| portDevEquipmentConfigurationFault The configuration stage of the portdevice setup
did not successfully finish.
A(ctivation): Configuration failure.
D(e-activation): Configuration succ… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.57.2.3.1.1.20 |
| portDevEquipmentPowerAMissing Lost connection to power module A
A(ctivation): When the port device loses contact with the
power module A.
D(e-activation): When the connection is r… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.57.2.3.1.1.21 |
| portDevEquipmentPowerBMissing Lost connection to power module B
A(ctivation): When the port device loses contact with the
power module B.
D(e-activation): When the connection is r… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.57.2.3.1.1.22 |
| portDevEquipmentInternalReference For internal use only. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.57.2.3.1.1.23 |
| portDevEquipmentMacAddress The mac address of the port device. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.57.2.3.1.1.24 |
| portDevEquipmentLocalPortIndex The index of the port that this device is connected to. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.57.2.3.1.1.25 |
| portDevEquipmentAdminPowerA Alarms relating to power module A
are suppressed.
down - Alarms relating to power module A
are suppressed. | column | LUM-TCAdminStatus | .1.3.6.1.4.1.8708.2.57.2.3.1.1.26 |
| portDevEquipmentAdminPowerB Alarms relating to power module B
are suppressed.
down - Alarms relating to power module B
are suppressed. | column | LUM-TCAdminStatus | .1.3.6.1.4.1.8708.2.57.2.3.1.1.27 |
| portDevEquipmentSelectedPort Selected active port on the customer interface of the nid.
Alarms on non selected ports are suppressed. | column | PortSelection | .1.3.6.1.4.1.8708.2.57.2.3.1.1.28 |
| portDevEquipmentDestMacAddress deprecated The destination MAC address inserted into the transmitted packets. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.8708.2.57.2.3.1.1.29 |
| portDevEquipmentDescr User configurable label for the port device. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.57.2.3.1.1.3 |
| portDevEquipmentDestMacAddressCheck If enabled, for each received packet the destination MAC address
is compared with the device MAC address. In case the addresses
are not equal, the packet is not processed. | column | Enumeration | .1.3.6.1.4.1.8708.2.57.2.3.1.1.30 |
| portDevEquipmentDeviceVersionType The device version type. This variable can be used to
see what version of the board has been detected. | column | PortDeviceVersionType | .1.3.6.1.4.1.8708.2.57.2.3.1.1.31 |
| portDevEquipmentActivePort Active port on the customer interface of the nid.
Alarms on non selected ports are suppressed. | column | PortSelection | .1.3.6.1.4.1.8708.2.57.2.3.1.1.32 |
| portDevEquipmentDyingGasp A Dying Gasp is signalled when power is going to be lost on the device. This could possibly indicate a power loss.
A(ctivation): A Dying Gasp was received
… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.57.2.3.1.1.33 |
| portDevEquipmentLosCsf Indicates whether Los Csf is enabled. | column | LUM-TCEnableDisable | .1.3.6.1.4.1.8708.2.57.2.3.1.1.34 |
| portDevEquipmentLocation The location of the port device. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.57.2.3.1.1.4 |
| portDevEquipmentAdminStatus The administrative state of the port device.
down - The device should be inactive.
Alarms are suppressed.
up - The device should be activated when
it… | column | LUM-TCAdminStatus | .1.3.6.1.4.1.8708.2.57.2.3.1.1.5 |
| portDevEquipmentOperStatus The operational state of the port device.
notPresent - The physical resources are not
available.
down - The interface is de-activated or the are
faul… | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.57.2.3.1.1.6 |
| portDevEquipmentExpectedType The expected port device type. | column | PortDeviceEquipmentType | .1.3.6.1.4.1.8708.2.57.2.3.1.1.7 |
| portDevEquipmentActualType The actual device type. If an unexpected device
has been detected this variable can be used to
see what type of board has been detected. | column | PortDeviceEquipmentType | .1.3.6.1.4.1.8708.2.57.2.3.1.1.8 |
| portDevEquipmentFwVersion The version of the firmware installed on port device. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.57.2.3.1.1.9 |