ifOtnMonTraceTxSignalStatus
LUM-IFOTNMON-MIB ·
.1.3.6.1.4.1.8708.2.55.2.5.1.1.18
Object
column
LUM-TCSignalStatusWithNA
The state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.
Context
- MIB
- LUM-IFOTNMON-MIB
- OID
.1.3.6.1.4.1.8708.2.55.2.5.1.1.18- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ifOtnMonTraceEntry
- Table
- ifOtnMonTraceTable
- Siblings
- 21
Values & Constraints
Type Values
1 | down |
2 | degraded |
3 | up |
2147483647 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifOtnMonTraceIndex An index assigned to each entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.55.2.5.1.1.1 |
| ifOtnMonTraceDapiTraceReceivedByte0 deprecated The received Destination Access Point Identifier for this interface.
The value 255 is used by SNMP agent to show that the attribute is
not valid in current configur… | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.55.2.5.1.1.10 |
| ifOtnMonTraceDapiTraceReceived The received Destination Access Point Identifier for this interface.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in curre… | column | OctetString | .1.3.6.1.4.1.8708.2.55.2.5.1.1.11 |
| ifOtnMonTraceDapiTraceExpected DAPI used for matching against the received DAPI.
Note, it is only possible to enter 15 characters since the first
character is added automatically according to sta… | column | OctetString | .1.3.6.1.4.1.8708.2.55.2.5.1.1.12 |
| ifOtnMonTraceOpSpecificTraceTransmitted The operator specific trace identifier to be transmitted
from this interface.
Set to empty string for default value.
<IP address>:<subrack&g… | column | OctetString | .1.3.6.1.4.1.8708.2.55.2.5.1.1.13 |
| ifOtnMonTraceOpSpecificTraceReceived The received operator specific trace identifier for this
interface.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in curren… | column | OctetString | .1.3.6.1.4.1.8708.2.55.2.5.1.1.14 |
| ifOtnMonTraceTraceIdMMDetectionMode The method to detect a trace identifier mismatch value.
off - Mismatch will be ignored on all levels
sapi - Mismatch is based on mismatch in expecte… | column | LUM-TCOtnTIMDetModeWithNA | .1.3.6.1.4.1.8708.2.55.2.5.1.1.15 |
| ifOtnMonTraceTraceAlarmMode deprecated Controls if the trace identifier mismatch alarm
should be raised. If trace alarm mode is enabled and if object
is set in terminating or monitor mode, BDI is sent
in backward direc… | column | LUM-TCEnabledDisabledWithNA | .1.3.6.1.4.1.8708.2.55.2.5.1.1.16 |
| ifOtnMonTraceTIMConsequenceActionsDisabled Controls if the trace identifier mismatch should give rise
to any consequent actions in the downstream direction.
Consequent actions for the upstream direction are always enabled
… | column | LUM-TCTruthValueWithNA | .1.3.6.1.4.1.8708.2.55.2.5.1.1.17 |
| ifOtnMonTraceRxSignalStatus The state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.55.2.5.1.1.19 |
| ifOtnMonTraceName The management name of the OTN trace, for example 'clientSmTrace:1:2:1-2',
where the first number indicates subrack, the second slot
number and the third/fourth are the physical p… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.55.2.5.1.1.2 |
| ifOtnMonTraceTraceMismatch Trace identifier mismatch (TIM).
Indicates if the expected SM/PM/TCM trace identifier
(SAPI and/or DAPI) differs from the received trace
identifier.
… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.55.2.5.1.1.20 |
| ifOtnMonTraceConnOtnDirection Direction of the trail trace identifier object
on the interface.
none - Direction is unambiguous.
rx - Received from the board-internal G.805 Matrix … | column | LUM-TCOtnDirectionWithNA | .1.3.6.1.4.1.8708.2.55.2.5.1.1.21 |
| ifOtnMonTraceUpPortId Internal port reference for traffic unit. | column | Integer32 | .1.3.6.1.4.1.8708.2.55.2.5.1.1.22 |
| ifOtnMonTraceConnOtnType What type of monitoring object the trace is related to.
sm - Section monitoring (SM).
pm - Path monitoring (PM).
tcm1 - Tandem conne… | column | LUM-TCOtnTypeWithNA | .1.3.6.1.4.1.8708.2.55.2.5.1.1.3 |
| ifOtnMonTraceConnOtnIndex An index that describes to which index in SM, TCM or PM table
this object is related. | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.55.2.5.1.1.4 |
| ifOtnMonTraceSapiTraceTransmitted The Source Access Point Identifier to be
transmitted from this interface.
Note, it is only possible to enter 15 characters since the first
character is added automa… | column | OctetString | .1.3.6.1.4.1.8708.2.55.2.5.1.1.5 |
| ifOtnMonTraceSapiTraceReceivedByte0 deprecated The received Source Access Point Identifier for this interface.
The value 255 is used by SNMP agent to show that the attribute is
not valid in current configuration… | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.55.2.5.1.1.6 |
| ifOtnMonTraceSapiTraceReceived The received Source Access Point Identifier for this interface.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in current co… | column | OctetString | .1.3.6.1.4.1.8708.2.55.2.5.1.1.7 |
| ifOtnMonTraceSapiTraceExpected SAPI used for matching against the received SAPI.
Note, it is only possible to enter 15 characters since first
character is added automatically according to standar… | column | OctetString | .1.3.6.1.4.1.8708.2.55.2.5.1.1.8 |
| ifOtnMonTraceDapiTraceTransmitted The Destination Access Point Identifier to be
transmitted from this interface.
Note, it is only possible to enter 15 characters since first
character is added autom… | column | OctetString | .1.3.6.1.4.1.8708.2.55.2.5.1.1.9 |