LUM-IFOTNMON-MIB Table View

The SM group contains information and configuration for
the SM section objects.

ifOtnMonSmEntry row .1.3.6.1.4.1.8708.2.55.2.2.1.1

An entry in the ifOtnMon SM list.

Indexes

ifOtnMonSmIndex

Column	Syntax	OID
ifOtnMonSmIndex An index assigned to each entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.55.2.2.1.1.1
ifOtnMonSmName The management name of the otn otu, for example 'otu:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers.	LUM-TCMgmtNameString Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.55.2.2.1.1.2
ifOtnMonSmConnIfBasicIfIndex An index that describes to which index in ifBasicIf table this object is related.	LUM-TCUnsigned32WithNA Type Constraints: range: 0..4294967294 Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object	.1.3.6.1.4.1.8708.2.55.2.2.1.1.3
ifOtnMonSmTxSignalStatus The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.	LUM-TCSignalStatusWithNA Type Values: 1 down 2 degraded 3 up 2147483647 notApplicable Description: SignalStatus. notApplicable - used to tell that attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.55.2.2.1.1.4
ifOtnMonSmRxSignalStatus The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.	LUM-TCSignalStatusWithNA Type Values: 1 down 2 degraded 3 up 2147483647 notApplicable Description: SignalStatus. notApplicable - used to tell that attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.55.2.2.1.1.5
ifOtnMonSmBackwardDefectIndication Backward defect indication (BDI). Indicates if backward defect indication (BDI) alarm exists or not. Reference: 15.7.2.1.3 G.709, 6.2.6.6.1 G.798 alarm: Backward defect indic…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.2.1.1.6
ifOtnMonSmIncomingAlignmentError Incoming alignment error (IAE). Indicates an incoming frame alignment error. Reference: 15.7.2.1.5 G.709, 6.2.6.10.1 G.798 A: Incoming frame alignment error (IAE) is active. …	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.2.1.1.7
ifOtnMonSmBackwardIncomingAlignmentError Backward incoming alignment error (BIAE). Indicates a backward incoming alignment error. Reference: 15.7.2.1.5 G.709, 6.2.6.10.1 G.798 A: Backward incoming alignment error (B…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.2.1.1.8
ifOtnMonSmCBackwardDefectIndication Backward defect indication (BDI). Indicates if backward defect indication (BDI) alarm exists or not. Reference: 15.7.2.1.3 G.709, 6.2.6.6.1 G.798 alarm: Backward defect indic…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.2.1.1.9
ifOtnMonSmCIncomingAlignmentError Incoming alignment error (IAE). Indicates an incoming frame alignment error. Reference: 15.7.2.1.7 G.709, 6.2.6.10.2 G.798 A: Incoming frame alignment error (IAE) is active. …	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.2.1.1.10
ifOtnMonSmCBackwardIncomingAlignmentError Backward incoming alignment error (BIAE). Indicates a backward incoming alignment error. Reference: 15.7.2.1.4 G.709, 6.2.6.11.1 G.798 A: Backward incoming alignment error (B…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.2.1.1.11

The tandem connection monitoring (tcm) group contains information
and configuration for the Tcm layer objects.

ifOtnMonTcmEntry row .1.3.6.1.4.1.8708.2.55.2.3.1.1

An entry in the ifOtnMon tcm list.

Indexes

ifOtnMonTcmIndex

Column	Syntax	OID
ifOtnMonTcmIndex An index assigned to each entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.55.2.3.1.1.1
ifOtnMonTcmName The management name of the otn tcm, for example 'tcm:1:2:1-2:1', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers. The last number tells which TCM in th…	LUM-TCMgmtNameString Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.55.2.3.1.1.2
ifOtnMonTcmConnOduIndex An index that describes to which index in ifOtnMonOdu table this object is related.	LUM-TCUnsigned32WithNA Type Constraints: range: 0..4294967294 Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object	.1.3.6.1.4.1.8708.2.55.2.3.1.1.3
ifOtnMonTcmAlarmMode Tells how section specific alarms are handled. ignore - Do not show fault status nor alarms for non-operational sections. display - Show fault status, but do not generate …	LUM-TCOtnAlarmMode Type Values: 0 ignore 1 alarm 2 display 2147483647 notApplicable Description: Tells how section specific alarms are handled. ignore - Do not show any alarms on non-terminated sections. display - Show fault status on non-terminated sections. alarm - Alarm also for …	.1.3.6.1.4.1.8708.2.55.2.3.1.1.4
ifOtnMonTcmMode TCM mode sets the mode of the TCM according to 14.5 in G.798 (06/2004). operational - The TCM overhead is operational. transparent - The TCM overhead is transparent. monitor …	LUM-TCTcmMode Type Values: 0 operational 1 transparent 2 monitor 2147483647 notApplicable Description: TCM mode for a TCM object according to G.798. operationl - The TCM section is terminated. transparent - The TCM section is transparent. monitor - Some consequent actions will occur due …	.1.3.6.1.4.1.8708.2.55.2.3.1.1.5
ifOtnMonTcmTcmNumber TCM number in ODU overhead. Can be tcm1 .. tcm6.	LUM-TCTcmNumber Type Values: 0 tcm1 1 tcm2 2 tcm3 3 tcm4 4 tcm5 5 tcm6 2147483647 notApplicable Description: TCM number in ODU overhead that is terminated. Can be tcm1 .. tcm6. notApplicable (2147483647) is used when attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.55.2.3.1.1.6
ifOtnMonTcmTxSignalStatus The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.	LUM-TCSignalStatusWithNA Type Values: 1 down 2 degraded 3 up 2147483647 notApplicable Description: SignalStatus. notApplicable - used to tell that attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.55.2.3.1.1.7
ifOtnMonTcmRxSignalStatus The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.	LUM-TCSignalStatusWithNA Type Values: 1 down 2 degraded 3 up 2147483647 notApplicable Description: SignalStatus. notApplicable - used to tell that attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.55.2.3.1.1.8
ifOtnMonTcmBackwardDefectIndication Rx Backward defect indication (BDI). Indicates if backward defect indication (BDI) alarm exists or not. Reference: 15.8.2.2.3 G.709, 2.6.6.1 G.798 alarm: Backward defect indi…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.3.1.1.9
ifOtnMonTcmBackwardIncomingAlignmentError Backward incoming alignment error (BIAE). Indicates a backward incoming alignment error. A: Backward incoming alignment error (BIAE) is active. D: BIAE is inactive.	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.3.1.1.10
ifOtnMonTcmRxAlarmIndicationSignal Rx Alarm indication signal (AIS). Indicates if alarm indication signal (AIS) alarm exists or not in receiving direction. Reference: 16.5.1 G.709, 15.8.2.1.5 G.709, 6.2.6.3.2 G.798 …	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.3.1.1.11
ifOtnMonTcmRxOpenConnectionIndication Rx Open connection indication (OCI). Indicates if an open connection indication (OCI) alarm exists or not in receiving direction. Reference: 15.8.2.2.5 G.709, 6.2.6.8.2 G.798 …	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.3.1.1.12
ifOtnMonTcmRxLockedDefectIndication Rx Locked defect indication (LCK). Indicates if locked defect indication alarm exists or not. Reference: 15.8.2.2.5 G.709, 6.2.6.9.1 G.798 alarm: Locked defect indication act…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.3.1.1.13
ifOtnMonTcmLossOfTandemConnection Loss of tandem connection (LTC). No operational tandem connection is found in other end. Reference: 6.2.1.4 in G.798 alarm: No other operational TCM is found. …	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.3.1.1.14
ifOtnMonTcmIncomingAlignmentError Incoming alignment error (IAE). Indicates an incoming frame alignment error when TCM is in use. A: Incoming frame alignment error (IAE) is active. D: IAE is inactive. …	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.3.1.1.15
ifOtnMonTcmSwitchCriteria TCM switch criteria set current TCM as protection switch criteria. disable - The TCM is not set as switch criteria. enable - The TCM is set as switch criteria.	LUM-TCEnabledDisabledWithNA Type Values: 1 disabled 2 enabled 2147483647 notApplicable Description: disabled - Attribute is not set. enabled - Attribute is set. notApplicable (2147483647) is used when attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.55.2.3.1.1.16

The path monitoring (pm) group contains information and configu-
ration for the Pm layer objects.

ifOtnMonPmEntry row .1.3.6.1.4.1.8708.2.55.2.4.1.1

An entry in the ifOtnMon pm list.

Indexes

ifOtnMonPmIndex

Column	Syntax	OID
ifOtnMonPmIndex An index assigned to each entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.55.2.4.1.1.1
ifOtnMonPmName The management name of the otn pm, for example 'pm:1:2:1-2:1', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers. The last number tells in which of the …	LUM-TCMgmtNameString Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.55.2.4.1.1.2
ifOtnMonPmConnOduIndex An index that describes to which index in ifOtnMonOdu table this object is related.	LUM-TCUnsigned32WithNA Type Constraints: range: 0..4294967294 Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object	.1.3.6.1.4.1.8708.2.55.2.4.1.1.4
ifOtnMonPmAlarmMode Tells how section specific alarms are handled. ignore - Do not show fault status nor alarms for non-operational sections. display - Show fault status, but do not generate alarms for non-ope…	LUM-TCOtnAlarmMode Type Values: 0 ignore 1 alarm 2 display 2147483647 notApplicable Description: Tells how section specific alarms are handled. ignore - Do not show any alarms on non-terminated sections. display - Show fault status on non-terminated sections. alarm - Alarm also for …	.1.3.6.1.4.1.8708.2.55.2.4.1.1.5
ifOtnMonPmTxSignalStatus The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.	LUM-TCSignalStatusWithNA Type Values: 1 down 2 degraded 3 up 2147483647 notApplicable Description: SignalStatus. notApplicable - used to tell that attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.55.2.4.1.1.6
ifOtnMonPmRxSignalStatus The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.	LUM-TCSignalStatusWithNA Type Values: 1 down 2 degraded 3 up 2147483647 notApplicable Description: SignalStatus. notApplicable - used to tell that attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.55.2.4.1.1.7
ifOtnMonPmRxBackwardDefectIndication Rx Backward defect indication (BDI), Monitored overhead: ODUk-PM-BDI Direction: Received from the associated physical interface and, unless the ODUk is terminated, the BDI is sent towards …	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.4.1.1.8
ifOtnMonPmRxAlarmIndicationSignal Rx Alarm indication signal (AIS), Monitored overhead: ODUk-PM-AIS Direction: Received from the associated physical interface and, unless the ODUk is terminated, the AIS is sent towards the…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.4.1.1.9
ifOtnMonPmRxOpenConnectionIndication Rx Open connection indication (OCI). Monitored overhead: ODUk-PM-OCI Direction: Received from the associated physical interface and, unless the ODUk is terminated, the OCI is sent towards …	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.4.1.1.10
ifOtnMonPmRxLockedDefectIndication Rx Locked defect indication (LCK). Monitored overhead: ODUk-PM-LCK Direction: Received from the associated physical interface and, unless the ODUk is terminated, the LCK is sent towards th…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.4.1.1.11
ifOtnMonPmTxBackwardDefectIndication Tx Backward defect indication (BDI). Monitored overhead: ODUk-PM-BDI Direction: Received from the board-internal G.805 Matrix and, if applicable, sent towards the physical interface. …	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.4.1.1.12
ifOtnMonPmTxAlarmIndicationSignal Tx Alarm indication signal (AIS). Monitored overhead: ODUk-PM-AIS Direction: Received from the board-internal G.805 Matrix and, if applicable, sent towards the physical interface. …	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.4.1.1.13
ifOtnMonPmTxOpenConnectionIndication Tx Open connection indication (OCI). Monitored overhead: ODUk-PM-AIS Direction: Received from the board-internal G.805 Matrix and, if applicable, sent towards the physical interface. …	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.4.1.1.14
ifOtnMonPmTxLockedDefectIndication Tx Locked Defect Indication (LCK). Monitored overhead: ODUk-PM-LCK Direction: Received from the board-internal G.805 Matrix and, if applicable, sent towards the physical interface. …	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.4.1.1.15
ifOtnMonPmUpPortId Internal port reference for traffic unit.	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.55.2.4.1.1.16
ifOtnMonPmCRxBackwardDefectIndication Rx Backward defect indication (BDI), Monitored overhead: ODUCn-PM-BDI Direction: Received from the associated physical interface and, unless the ODUC is terminated, the BDI is sent towards…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.4.1.1.17
ifOtnMonPmCRxAlarmIndicationSignal Rx Alarm indication signal (AIS), Monitored overhead: ODUCn-PM-AIS Direction: Received from the associated physical interface and, unless the ODUC is terminated, the AIS is sent towards th…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.4.1.1.18

The trace group contains information and configuration for the
trace objects defined in G.709.

ifOtnMonTraceEntry row .1.3.6.1.4.1.8708.2.55.2.5.1.1

An entry in the ifOtnMon trace list.

Indexes

ifOtnMonTraceIndex

Column	Syntax	OID
ifOtnMonTraceIndex An index assigned to each entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.55.2.5.1.1.1
ifOtnMonTraceName The management name of the OTN trace, for example 'clientSmTrace:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers.	LUM-TCMgmtNameStringr/w Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.55.2.5.1.1.2
ifOtnMonTraceConnOtnType What type of monitoring object the trace is related to. sm - Section monitoring (SM). pm - Path monitoring (PM). tcm1 - Tandem connection monitoring (TCM) tc…	LUM-TCOtnTypeWithNA Type Values: 0 sm 1 pm 2 tcm1 3 tcm2 4 tcm3 5 tcm4 6 tcm5 7 tcm6 2147483646 notAvailable 2147483647 notApplicable Description: Type of overhead. sm - Section monitoring (SM). tcm - Tandem connection monitoring (TCM) pm - Path monitoring (PM)	.1.3.6.1.4.1.8708.2.55.2.5.1.1.3
ifOtnMonTraceConnOtnIndex An index that describes to which index in SM, TCM or PM table this object is related.	LUM-TCUnsigned32WithNA Type Constraints: range: 0..4294967294 Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object	.1.3.6.1.4.1.8708.2.55.2.5.1.1.4
ifOtnMonTraceSapiTraceTransmitted The Source Access Point Identifier to be transmitted from this interface. Note, it is only possible to enter 15 characters since the first character is added automatically according to standard. …	LUM-TCDisplayStringWithNAr/w Constraints: range: 0-15 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.8708.2.55.2.5.1.1.5
ifOtnMonTraceSapiTraceReceivedByte0deprecated The received Source Access Point Identifier for this interface. The value 255 is used by SNMP agent to show that the attribute is not valid in current configuration. The value 254 is used b…	LUM-TCUnsigned32WithNA Type Constraints: range: 0..4294967294 Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object	.1.3.6.1.4.1.8708.2.55.2.5.1.1.6
ifOtnMonTraceSapiTraceReceived The received Source Access Point Identifier for this interface. The trace _notApplicable_ is used to tell SNMP clients that this attribute is not used in current configuration. The trace _n…	LUM-TCDisplayStringWithNA Constraints: range: 0-15 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.8708.2.55.2.5.1.1.7
ifOtnMonTraceSapiTraceExpected SAPI used for matching against the received SAPI. Note, it is only possible to enter 15 characters since first character is added automatically according to standard. The trace _notApplicab…	LUM-TCDisplayStringWithNAr/w Constraints: range: 0-15 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.8708.2.55.2.5.1.1.8
ifOtnMonTraceDapiTraceTransmitted The Destination Access Point Identifier to be transmitted from this interface. Note, it is only possible to enter 15 characters since first character is added automatically according to standard. …	LUM-TCDisplayStringWithNAr/w Constraints: range: 0-15 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.8708.2.55.2.5.1.1.9
ifOtnMonTraceDapiTraceReceivedByte0deprecated The received Destination Access Point Identifier for this interface. The value 255 is used by SNMP agent to show that the attribute is not valid in current configuration. The value 254 is u…	LUM-TCUnsigned32WithNA Type Constraints: range: 0..4294967294 Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object	.1.3.6.1.4.1.8708.2.55.2.5.1.1.10
ifOtnMonTraceDapiTraceReceived The received Destination Access Point Identifier for this interface. The trace _notApplicable_ is used to tell SNMP clients that this attribute is not used in current configuration. The tra…	LUM-TCDisplayStringWithNA Constraints: range: 0-15 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.8708.2.55.2.5.1.1.11
ifOtnMonTraceDapiTraceExpected DAPI used for matching against the received DAPI. Note, it is only possible to enter 15 characters since the first character is added automatically according to standard. The trace _notAppl…	LUM-TCDisplayStringWithNAr/w Constraints: range: 0-15 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.8708.2.55.2.5.1.1.12
ifOtnMonTraceOpSpecificTraceTransmitted The operator specific trace identifier to be transmitted from this interface. Set to empty string for default value. <IP address>:<subrack>:<slot>:<port> …	LUM-TCDisplayStringWithNAr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.8708.2.55.2.5.1.1.13
ifOtnMonTraceOpSpecificTraceReceived The received operator specific trace identifier for this interface. The trace _notApplicable_ is used to tell SNMP clients that this attribute is not used in current configuration. The trac…	LUM-TCDisplayStringWithNA Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.8708.2.55.2.5.1.1.14
ifOtnMonTraceTraceIdMMDetectionMode The method to detect a trace identifier mismatch value. off - Mismatch will be ignored on all levels sapi - Mismatch is based on mismatch in expected and received SAPI trace …	LUM-TCOtnTIMDetModeWithNAr/w Type Values: 0 off 1 sapi 2 dapi 3 both 2147483647 notApplicable Description: TTI Mismatch detection mode. off - TTI MM is not monitored on any level sapi - TTI MM is detected based on SAPI dapi - TTI MM is detected based on DAPI both - TTI MM is detec…	.1.3.6.1.4.1.8708.2.55.2.5.1.1.15
ifOtnMonTraceTraceAlarmModedeprecated Controls if the trace identifier mismatch alarm should be raised. If trace alarm mode is enabled and if object is set in terminating or monitor mode, BDI is sent in backward direction if received trace and expected trac…	LUM-TCEnabledDisabledWithNA Type Values: 1 disabled 2 enabled 2147483647 notApplicable Description: disabled - Attribute is not set. enabled - Attribute is set. notApplicable (2147483647) is used when attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.55.2.5.1.1.16
ifOtnMonTraceTIMConsequenceActionsDisabled Controls if the trace identifier mismatch should give rise to any consequent actions in the downstream direction. Consequent actions for the upstream direction are always enabled regardless of this value. …	LUM-TCTruthValueWithNA Type Values: 0 true 1 false 2147483646 notAvailable 2147483647 notApplicable Description: Defines a value that can be true, false or not available true - The condition is false false - The condition is not true notAvailable (2147483646) is used when attribute is …	.1.3.6.1.4.1.8708.2.55.2.5.1.1.17
ifOtnMonTraceTxSignalStatus The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.	LUM-TCSignalStatusWithNA Type Values: 1 down 2 degraded 3 up 2147483647 notApplicable Description: SignalStatus. notApplicable - used to tell that attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.55.2.5.1.1.18
ifOtnMonTraceRxSignalStatus The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.	LUM-TCSignalStatusWithNA Type Values: 1 down 2 degraded 3 up 2147483647 notApplicable Description: SignalStatus. notApplicable - used to tell that attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.55.2.5.1.1.19
ifOtnMonTraceTraceMismatch Trace identifier mismatch (TIM). Indicates if the expected SM/PM/TCM trace identifier (SAPI and/or DAPI) differs from the received trace identifier. Reference: 15.8.2.2.1 G.709 …	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.55.2.5.1.1.20
ifOtnMonTraceConnOtnDirection Direction of the trail trace identifier object on the interface. none - Direction is unambiguous. rx - Received from the board-internal G.805 Matrix and, if applicable, sent towards th…	LUM-TCOtnDirectionWithNA Type Values: 0 none 1 rx 2 tx 2147483647 notApplicable Description: Indicates the direction applied to the monitoring object the trace is related to. None - Unspecified direction. Rx - In bound direction. Tx - out bound direction. notApplica…	.1.3.6.1.4.1.8708.2.55.2.5.1.1.21
ifOtnMonTraceUpPortId Internal port reference for traffic unit.	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.55.2.5.1.1.22