ifOtnMonTcmRxOpenConnectionIndication
LUM-IFOTNMON-MIB ·
.1.3.6.1.4.1.8708.2.55.2.3.1.1.12
Object
column
LUM-TCFaultStatusWithNA
Rx Open connection indication (OCI).
Indicates if an open connection indication (OCI) alarm
exists or not in receiving direction.
Reference: 15.8.2.2.5 G.709, 6.2.6.8.2 G.798
alarm: An 'open connection' in OTU signal is detected.
ok: OCI inactive.
Context
- MIB
- LUM-IFOTNMON-MIB
- OID
.1.3.6.1.4.1.8708.2.55.2.3.1.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ifOtnMonTcmEntry
- Table
- ifOtnMonTcmTable
- Siblings
- 15
Values & Constraints
Type Values
1 | ok |
2 | alarm |
2147483647 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifOtnMonTcmIndex An index assigned to each entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.55.2.3.1.1.1 |
| ifOtnMonTcmBackwardIncomingAlignmentError Backward incoming alignment error (BIAE).
Indicates a backward incoming alignment error.
A: Backward incoming alignment error (BIAE) is active.
… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.55.2.3.1.1.10 |
| ifOtnMonTcmRxAlarmIndicationSignal Rx Alarm indication signal (AIS).
Indicates if alarm indication signal (AIS) alarm
exists or not in receiving direction.
Reference: 16.5.1 G.709, 15.… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.55.2.3.1.1.11 |
| ifOtnMonTcmRxLockedDefectIndication Rx Locked defect indication (LCK).
Indicates if locked defect indication alarm exists or not.
Reference: 15.8.2.2.5 G.709, 6.2.6.9.1 G.798
… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.55.2.3.1.1.13 |
| ifOtnMonTcmLossOfTandemConnection Loss of tandem connection (LTC).
No operational tandem connection
is found in other end.
Reference: 6.2.1.4 in G.798
alarm: No other o… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.55.2.3.1.1.14 |
| ifOtnMonTcmIncomingAlignmentError Incoming alignment error (IAE).
Indicates an incoming frame alignment error when TCM is in use.
A: Incoming frame alignment error (IAE) is active.
… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.55.2.3.1.1.15 |
| ifOtnMonTcmSwitchCriteria TCM switch criteria set current TCM as protection switch criteria.
disable - The TCM is not set as switch criteria.
enable - The TCM is set as swit… | column | LUM-TCEnabledDisabledWithNA | .1.3.6.1.4.1.8708.2.55.2.3.1.1.16 |
| ifOtnMonTcmName The management name of the otn tcm, for example 'tcm:1:2:1-2:1',
where the first number indicates subrack, the second slot
number and the third/fourth are the physical port number… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.55.2.3.1.1.2 |
| ifOtnMonTcmConnOduIndex An index that describes to which index in ifOtnMonOdu table
this object is related. | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.55.2.3.1.1.3 |
| ifOtnMonTcmAlarmMode Tells how section specific alarms are handled.
ignore - Do not show fault status nor alarms for
non-operational sections.
display - Show fau… | column | LUM-TCOtnAlarmMode | .1.3.6.1.4.1.8708.2.55.2.3.1.1.4 |
| ifOtnMonTcmMode TCM mode sets the mode of the TCM according to 14.5 in
G.798 (06/2004).
operational - The TCM overhead is operational.
transparent - The TCM overhead… | column | LUM-TCTcmMode | .1.3.6.1.4.1.8708.2.55.2.3.1.1.5 |
| ifOtnMonTcmTcmNumber TCM number in ODU overhead. Can be tcm1 .. tcm6. | column | LUM-TCTcmNumber | .1.3.6.1.4.1.8708.2.55.2.3.1.1.6 |
| ifOtnMonTcmTxSignalStatus The state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.55.2.3.1.1.7 |
| ifOtnMonTcmRxSignalStatus The state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.55.2.3.1.1.8 |
| ifOtnMonTcmBackwardDefectIndication Rx Backward defect indication (BDI).
Indicates if backward defect indication (BDI) alarm
exists or not.
Reference: 15.8.2.2.3 G.709, 2.6.6.1 G.798
… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.55.2.3.1.1.9 |