ifOtnMonTcmName

LUM-IFOTNMON-MIB · .1.3.6.1.4.1.8708.2.55.2.3.1.1.2

MIB view Table view

Object

column LUM-TCMgmtNameString

The management name of the otn tcm, for example 'tcm:1:2:1-2:1',
where the first number indicates subrack, the second slot
number and the third/fourth are the physical port numbers. The
last number tells which TCM in the ODU header it is.

Context

MIB: LUM-IFOTNMON-MIB
OID: .1.3.6.1.4.1.8708.2.55.2.3.1.1.2
Type: column
Access: readonly
Status: current
Parent: ifOtnMonTcmEntry
Table: ifOtnMonTcmTable
Siblings: 15

Syntax

LUM-TCMgmtNameString

Source: LUM-TCMgmtNameString
Base type: OctetString

Values & Constraints

Type Constraints

range: 0..255

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ifOtnMonTcmIndex An index assigned to each entry.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.8708.2.55.2.3.1.1.1`
ifOtnMonTcmBackwardIncomingAlignmentError Backward incoming alignment error (BIAE). Indicates a backward incoming alignment error. A: Backward incoming alignment error (BIAE) is active. …	column	LUM-TCFaultStatusWithNA	`.1.3.6.1.4.1.8708.2.55.2.3.1.1.10`
ifOtnMonTcmRxAlarmIndicationSignal Rx Alarm indication signal (AIS). Indicates if alarm indication signal (AIS) alarm exists or not in receiving direction. Reference: 16.5.1 G.709, 15.…	column	LUM-TCFaultStatusWithNA	`.1.3.6.1.4.1.8708.2.55.2.3.1.1.11`
ifOtnMonTcmRxOpenConnectionIndication Rx Open connection indication (OCI). Indicates if an open connection indication (OCI) alarm exists or not in receiving direction. Reference: 15.8.2.2…	column	LUM-TCFaultStatusWithNA	`.1.3.6.1.4.1.8708.2.55.2.3.1.1.12`
ifOtnMonTcmRxLockedDefectIndication Rx Locked defect indication (LCK). Indicates if locked defect indication alarm exists or not. Reference: 15.8.2.2.5 G.709, 6.2.6.9.1 G.798 …	column	LUM-TCFaultStatusWithNA	`.1.3.6.1.4.1.8708.2.55.2.3.1.1.13`
ifOtnMonTcmLossOfTandemConnection Loss of tandem connection (LTC). No operational tandem connection is found in other end. Reference: 6.2.1.4 in G.798 alarm: No other o…	column	LUM-TCFaultStatusWithNA	`.1.3.6.1.4.1.8708.2.55.2.3.1.1.14`
ifOtnMonTcmIncomingAlignmentError Incoming alignment error (IAE). Indicates an incoming frame alignment error when TCM is in use. A: Incoming frame alignment error (IAE) is active. …	column	LUM-TCFaultStatusWithNA	`.1.3.6.1.4.1.8708.2.55.2.3.1.1.15`
ifOtnMonTcmSwitchCriteria TCM switch criteria set current TCM as protection switch criteria. disable - The TCM is not set as switch criteria. enable - The TCM is set as swit…	column	LUM-TCEnabledDisabledWithNA	`.1.3.6.1.4.1.8708.2.55.2.3.1.1.16`
ifOtnMonTcmConnOduIndex An index that describes to which index in ifOtnMonOdu table this object is related.	column	LUM-TCUnsigned32WithNA	`.1.3.6.1.4.1.8708.2.55.2.3.1.1.3`
ifOtnMonTcmAlarmMode Tells how section specific alarms are handled. ignore - Do not show fault status nor alarms for non-operational sections. display - Show fau…	column	LUM-TCOtnAlarmMode	`.1.3.6.1.4.1.8708.2.55.2.3.1.1.4`
ifOtnMonTcmMode TCM mode sets the mode of the TCM according to 14.5 in G.798 (06/2004). operational - The TCM overhead is operational. transparent - The TCM overhead…	column	LUM-TCTcmMode	`.1.3.6.1.4.1.8708.2.55.2.3.1.1.5`
ifOtnMonTcmTcmNumber TCM number in ODU overhead. Can be tcm1 .. tcm6.	column	LUM-TCTcmNumber	`.1.3.6.1.4.1.8708.2.55.2.3.1.1.6`
ifOtnMonTcmTxSignalStatus The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up …	column	LUM-TCSignalStatusWithNA	`.1.3.6.1.4.1.8708.2.55.2.3.1.1.7`
ifOtnMonTcmRxSignalStatus The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up …	column	LUM-TCSignalStatusWithNA	`.1.3.6.1.4.1.8708.2.55.2.3.1.1.8`
ifOtnMonTcmBackwardDefectIndication Rx Backward defect indication (BDI). Indicates if backward defect indication (BDI) alarm exists or not. Reference: 15.8.2.2.3 G.709, 2.6.6.1 G.798 …	column	LUM-TCFaultStatusWithNA	`.1.3.6.1.4.1.8708.2.55.2.3.1.1.9`