ifOpticalTransLaneCarrierGroupRxPowerLevelLow
LUM-IFOPTICAL-MIB ·
.1.3.6.1.4.1.8708.2.48.2.7.1.1.12
Object
column LUM-TCFaultStatusWithNA
Low Rx power.
Received power level low threshold exceeded.
If multi lane transceiver is used the threshold
is exceeded on at least one lane.
Applicable for all signal formats.
alarm: The received power level is below the
associated threshold.
ok: The received power level is at least 0.5 dBm
above the threshold.
Context
- MIB
- LUM-IFOPTICAL-MIB
- OID
.1.3.6.1.4.1.8708.2.48.2.7.1.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ifOpticalTransLaneCarrierGroupEntry
- Groups
- 3
Net-SNMP examples
How SNMP and these commands workWalk the column to discover its indexed instances, or supply every index to read one instance.
Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFOPTICAL-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFOPTICAL-MIB::ifOpticalTransLaneCarrierGroupRxPowerLevelLow'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'LUM-IFOPTICAL-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFOPTICAL-MIB::ifOpticalTransLaneCarrierGroupRxPowerLevelLow.<ifOpticalTransLaneCarrierGroupIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'LUM-IFOPTICAL-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LUM-IFOPTICAL-MIB::ifOpticalTransLaneCarrierGroupRxPowerLevelLow'
Syntax
- Source
- LUM-TCFaultStatusWithNA
- Base type
Enumeration
Type Description
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.
ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
alarm - indicates that a fault condition is present
and an alarm is active.
notApplicable - used to tell that attribute
is not used in current configuration.
Note: The list of FaultStatus objects forms the list of all
potential alarms for the system.
Values & Constraints
Type Values
1 | ok |
2 | alarm |
2147483647 | notApplicable |