ifIwdmRsTraceReceived
LUM-IFIWDM-MIB ·
.1.3.6.1.4.1.8708.2.63.2.2.1.1.4
Object
column
OctetString
The received operator specific trace identifier for this
interface.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in current configuration.
The trace _notAvailable_ is used to tell SNMP clients that
this attribute is not possible to read at the moment.
Context
- MIB
- LUM-IFIWDM-MIB
- OID
.1.3.6.1.4.1.8708.2.63.2.2.1.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ifIwdmRsEntry
- Table
- ifIwdmRsTable
- Siblings
- 12
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-63
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifIwdmRsIndex An index assigned to each entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.63.2.2.1.1.1 |
| ifIwdmRsConnIfBasicIfIndex An index describing to which index in ifBasicIf table
this object is related to. | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.63.2.2.1.1.10 |
| ifIwdmRsTxSignalStatus The state for outgoing (Tx) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.63.2.2.1.1.11 |
| ifIwdmRsRxSignalStatus The state for incoming (Rx) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.63.2.2.1.1.12 |
| ifIwdmRsRate Rate | column | LUM-TCSignalFormat | .1.3.6.1.4.1.8708.2.63.2.2.1.1.13 |
| ifIwdmRsName The management name of the iWDM Rs,
for example 'rs:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.63.2.2.1.1.2 |
| ifIwdmRsTraceTransmitted The operator specific trace identifier to be transmitted
from this interface.
The trace identifier length is by default 0 to 63.
For tpmrHL16G board only the length… | column | OctetString | .1.3.6.1.4.1.8708.2.63.2.2.1.1.3 |
| ifIwdmRsTraceExpected Trace identifier used for matching against
the received trace identifier.
The trace identifier length is by default 0 to 63.
For tpmrHL16G board only the length is … | column | OctetString | .1.3.6.1.4.1.8708.2.63.2.2.1.1.5 |
| ifIwdmRsTraceAlarmMode Controls if the trace identifier mismatch alarm
should be raised.
disabled - The alarm is disabled.
enabled - The alarm is raised if expected trace i… | column | LUM-TCEnabledDisabledWithNA | .1.3.6.1.4.1.8708.2.63.2.2.1.1.6 |
| ifIwdmRsTraceTraceMismatch Trace identifier mismatch.
Indicates if the expected trace identifier
differs from the received trace identifier.
Alarm: The received trace identifie… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.63.2.2.1.1.7 |
| ifIwdmRsUpId Identity in the UP for the iwdmRs entry in the traffic unit | column | Unsigned32 | .1.3.6.1.4.1.8708.2.63.2.2.1.1.8 |
| ifIwdmRsLossOfFrame Loss of frame (LOF).
Alarm: An iWDM frame cannot be located.
OK: An iWDM frame can be located. | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.63.2.2.1.1.9 |