LUM-IFIWDM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
31
.1.3.6.1.4.1.8708.2.63.2.2.1 · 1 row entry · 13 columns
The regenerator (iWDM-rs) group contains information and
configuration for the iWDM regenerator section (iWDM-rs).
ifIwdmRsEntry entry .1.3.6.1.4.1.8708.2.63.2.2.1.1
An entry in the ifIwdm rs list.
Indexes
ifIwdmRsIndex
Column Syntax OID
ifIwdmRsIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.63.2.2.1.1.1
ifIwdmRsName
The management name of the iWDM Rs,
for example 'rs:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.8708.2.63.2.2.1.1.2
ifIwdmRsTraceTransmitted
The operator specific trace identifier to be transmitted
from this interface.

The trace identifier length is by default 0 to 63.
For tpmrHL16G board only the length is 0 to 15.

Set to empty…
OctetStringr/w
Constraints:
range: 0-63
.1.3.6.1.4.1.8708.2.63.2.2.1.1.3
ifIwdmRsTraceReceived
The received operator specific trace identifier for this
interface.

The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in current configuration.

The trac…
OctetString
Constraints:
range: 0-63
.1.3.6.1.4.1.8708.2.63.2.2.1.1.4
ifIwdmRsTraceExpected
Trace identifier used for matching against
the received trace identifier.

The trace identifier length is by default 0 to 63.
For tpmrHL16G board only the length is 0 to 15.

The trace n/a is…
OctetStringr/w
Constraints:
range: 0-63
.1.3.6.1.4.1.8708.2.63.2.2.1.1.5
ifIwdmRsTraceAlarmMode
Controls if the trace identifier mismatch alarm
should be raised.

disabled - The alarm is disabled.

enabled - The alarm is raised if expected trace identifier
differs from the received trac…
LUM-TCEnabledDisabledWithNA
Textual Convention: LUM-TCEnabledDisabledWithNA Enumeration
Type Values:
1disabled
2enabled
2147483647notApplicable
.1.3.6.1.4.1.8708.2.63.2.2.1.1.6
ifIwdmRsTraceTraceMismatch
Trace identifier mismatch.

Indicates if the expected trace identifier
differs from the received trace identifier.

Alarm: The received trace identifier differs from
the expected trace identi…
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
.1.3.6.1.4.1.8708.2.63.2.2.1.1.7
ifIwdmRsUpId
Identity in the UP for the iwdmRs entry in the traffic unit
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.63.2.2.1.1.8
ifIwdmRsLossOfFrame
Loss of frame (LOF).


Alarm: An iWDM frame cannot be located.

OK: An iWDM frame can be located.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
.1.3.6.1.4.1.8708.2.63.2.2.1.1.9
ifIwdmRsConnIfBasicIfIndex
An index describing to which index in ifBasicIf table
this object is related to.
LUM-TCUnsigned32WithNA
Textual Convention: LUM-TCUnsigned32WithNA Unsigned32
Type Constraints:
range: 0..4294967294
.1.3.6.1.4.1.8708.2.63.2.2.1.1.10
ifIwdmRsTxSignalStatus
The state for outgoing (Tx) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Textual Convention: LUM-TCSignalStatusWithNA Enumeration
Type Values:
1down
2degraded
3up
2147483647notApplicable
.1.3.6.1.4.1.8708.2.63.2.2.1.1.11
ifIwdmRsRxSignalStatus
The state for incoming (Rx) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Textual Convention: LUM-TCSignalStatusWithNA Enumeration
Type Values:
1down
2degraded
3up
2147483647notApplicable
.1.3.6.1.4.1.8708.2.63.2.2.1.1.12
ifIwdmRsRate
Rate
LUM-TCSignalFormat
Textual Convention: LUM-TCSignalFormat Enumeration
Type Values:
1other
2stm1
3stm4
4stm16
5gbE
6stm64
7fc1Gb
8fc2Gb
9wan10GbE
10unused
11lan10GbE
12escon
13esconLL
14dvb270
15oc3
16oc12
17oc48
18oc192
19hdtv1485
20ethernet
21fastEthernet
22lan10GbEFec
23wan10GbEStm64Fec
24fc4Gb
25etr
26auto
27down
28stm1Oc3
29stm4Oc12
30stm16Oc48
31stm64Oc192
32gbe9Line
34ddgbeLine
35gbEorTrm5500
36fc8Gb
37otu2
38otu2e
39e1
40t1
41mbh2Gb5
42syncE
43line4G
44mbh4Gbps
45fecLan10GbE1A
46fecLan10GbE1B
47sdi3G
48iWdm4G
49sdSdi270
50hdtvNTSC
51oc768
52stm256
53lan40GbE
54wan40GbE
55sfStm256Oc768
56iwdm40Gb
57otu4
58lan100GbE
59transpLan10GbE
60cpri1
61cpri2
62cpri3
63cpri4
64cpri5
65cpri6
66cpri7
67fc10Gb
68fc16Gb
69cpri8
70obsai1x
71obsai2x
72obsai4x
73obsai8x
74otu1
75iwdm11G
76rw100G
77rw200G
78otu4SdFec
79otuj1
80otuj2
2147483647notApplicable
.1.3.6.1.4.1.8708.2.63.2.2.1.1.13
.1.3.6.1.4.1.8708.2.63.2.3.1 · 1 row entry · 9 columns
The multiplexing (iWDM-ms) group contains information and
configuration for the iWDM multiplexing section (iWDM-ms).
ifIwdmMsEntry entry .1.3.6.1.4.1.8708.2.63.2.3.1.1
An entry in the ifIwdm ms list.
Indexes
ifIwdmMsIndex
Column Syntax OID
ifIwdmMsIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.63.2.3.1.1.1
ifIwdmMsName
The management name of the iWDM Ms,
for example 'ms:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.8708.2.63.2.3.1.1.2
ifIwdmMsAlarmIndicationSignal
Alarm indication signal (AIS).

Alarm: An 'all ones' pattern is detected.

OK: The signal recovered.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
.1.3.6.1.4.1.8708.2.63.2.3.1.1.3
ifIwdmMsBackwardDefectIndication
Backward defect indication (BDI).

Indicates if backward defect indication (BDI) alarm
exists or not.

Alarm: Backward defect indication (in wrapper) active.

OK: Backward defec…
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
.1.3.6.1.4.1.8708.2.63.2.3.1.1.4
ifIwdmMsUpId
Identity in the UP for the iwdmMs entry in the traffic unit
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.63.2.3.1.1.5
ifIwdmMsConnIfBasicIfIndex
An index describing to which index in ifBasicIf table
this object is related to.
LUM-TCUnsigned32WithNA
Textual Convention: LUM-TCUnsigned32WithNA Unsigned32
Type Constraints:
range: 0..4294967294
.1.3.6.1.4.1.8708.2.63.2.3.1.1.6
ifIwdmMsTxSignalStatus
The state for outgoing (Tx) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Textual Convention: LUM-TCSignalStatusWithNA Enumeration
Type Values:
1down
2degraded
3up
2147483647notApplicable
.1.3.6.1.4.1.8708.2.63.2.3.1.1.7
ifIwdmMsRxSignalStatus
The state for incoming (Rx) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Textual Convention: LUM-TCSignalStatusWithNA Enumeration
Type Values:
1down
2degraded
3up
2147483647notApplicable
.1.3.6.1.4.1.8708.2.63.2.3.1.1.8
ifIwdmMsRate
Rate
LUM-TCSignalFormat
Textual Convention: LUM-TCSignalFormat Enumeration
Type Values:
1other
2stm1
3stm4
4stm16
5gbE
6stm64
7fc1Gb
8fc2Gb
9wan10GbE
10unused
11lan10GbE
12escon
13esconLL
14dvb270
15oc3
16oc12
17oc48
18oc192
19hdtv1485
20ethernet
21fastEthernet
22lan10GbEFec
23wan10GbEStm64Fec
24fc4Gb
25etr
26auto
27down
28stm1Oc3
29stm4Oc12
30stm16Oc48
31stm64Oc192
32gbe9Line
34ddgbeLine
35gbEorTrm5500
36fc8Gb
37otu2
38otu2e
39e1
40t1
41mbh2Gb5
42syncE
43line4G
44mbh4Gbps
45fecLan10GbE1A
46fecLan10GbE1B
47sdi3G
48iWdm4G
49sdSdi270
50hdtvNTSC
51oc768
52stm256
53lan40GbE
54wan40GbE
55sfStm256Oc768
56iwdm40Gb
57otu4
58lan100GbE
59transpLan10GbE
60cpri1
61cpri2
62cpri3
63cpri4
64cpri5
65cpri6
66cpri7
67fc10Gb
68fc16Gb
69cpri8
70obsai1x
71obsai2x
72obsai4x
73obsai8x
74otu1
75iwdm11G
76rw100G
77rw200G
78otu4SdFec
79otuj1
80otuj2
2147483647notApplicable
.1.3.6.1.4.1.8708.2.63.2.3.1.1.9
.1.3.6.1.4.1.8708.2.63.2.4.1 · 1 row entry · 9 columns
The path (iWDM-path) group contains information and
configuration for the iWDM path section (iWDM-path).
ifIwdmPathEntry entry .1.3.6.1.4.1.8708.2.63.2.4.1.1
An entry in the ifIwdm path list.
Indexes
ifIwdmPathIndex
Column Syntax OID
ifIwdmPathIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.63.2.4.1.1.1
ifIwdmPathName
The management name of the iWDM path,
for example 'path:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.8708.2.63.2.4.1.1.2
ifIwdmPathBackwardDefectIndication
Backward defect indication (BDI).

Indicates if backward defect indication (BDI) alarm
exists or not.

Alarm: Backward defect indication (in wrapper) active.

OK: Backward defec…
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
.1.3.6.1.4.1.8708.2.63.2.4.1.1.3
ifIwdmPathClientSignalFailure
Client signal failure.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
.1.3.6.1.4.1.8708.2.63.2.4.1.1.4
ifIwdmPathUId
Unique identity for the iwdmPath entry in the traffic unit
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.63.2.4.1.1.5
ifIwdmPathConnIfBasicIfIndex
An index describing to which index in ifBasicIf table
this object is related to.
LUM-TCUnsigned32WithNA
Textual Convention: LUM-TCUnsigned32WithNA Unsigned32
Type Constraints:
range: 0..4294967294
.1.3.6.1.4.1.8708.2.63.2.4.1.1.6
ifIwdmPathTxSignalStatus
The state for outgoing (Tx) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Textual Convention: LUM-TCSignalStatusWithNA Enumeration
Type Values:
1down
2degraded
3up
2147483647notApplicable
.1.3.6.1.4.1.8708.2.63.2.4.1.1.7
ifIwdmPathRxSignalStatus
The state for incoming (Rx) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Textual Convention: LUM-TCSignalStatusWithNA Enumeration
Type Values:
1down
2degraded
3up
2147483647notApplicable
.1.3.6.1.4.1.8708.2.63.2.4.1.1.8
ifIwdmPathRate
Rate
LUM-TCSignalFormat
Textual Convention: LUM-TCSignalFormat Enumeration
Type Values:
1other
2stm1
3stm4
4stm16
5gbE
6stm64
7fc1Gb
8fc2Gb
9wan10GbE
10unused
11lan10GbE
12escon
13esconLL
14dvb270
15oc3
16oc12
17oc48
18oc192
19hdtv1485
20ethernet
21fastEthernet
22lan10GbEFec
23wan10GbEStm64Fec
24fc4Gb
25etr
26auto
27down
28stm1Oc3
29stm4Oc12
30stm16Oc48
31stm64Oc192
32gbe9Line
34ddgbeLine
35gbEorTrm5500
36fc8Gb
37otu2
38otu2e
39e1
40t1
41mbh2Gb5
42syncE
43line4G
44mbh4Gbps
45fecLan10GbE1A
46fecLan10GbE1B
47sdi3G
48iWdm4G
49sdSdi270
50hdtvNTSC
51oc768
52stm256
53lan40GbE
54wan40GbE
55sfStm256Oc768
56iwdm40Gb
57otu4
58lan100GbE
59transpLan10GbE
60cpri1
61cpri2
62cpri3
63cpri4
64cpri5
65cpri6
66cpri7
67fc10Gb
68fc16Gb
69cpri8
70obsai1x
71obsai2x
72obsai4x
73obsai8x
74otu1
75iwdm11G
76rw100G
77rw200G
78otu4SdFec
79otuj1
80otuj2
2147483647notApplicable
.1.3.6.1.4.1.8708.2.63.2.4.1.1.9