ifAmplifierAmplifierAdminStatus

LUM-IFAMPLIFIER-MIB · .1.3.6.1.4.1.8708.2.65.2.2.1.1.8
Commands MIB view Table view

Object

column r/w LUM-TCAdminStatusWithNA 
The administrative state of the interface.
              
up - The interface is active.
     Pump(s) are activated if all activation criteria are fulfilled.
              
down - The interface is de-activated. All pumps are shut off.
              
service - The interface is activated but alarms are suppressed.
Intended for use during service or re-configuration.
When service is concluded adminStatus should be set to 'up' again.
Note that there is no difference between 'up' and 'service',
if no alarms can be raised from this object.

Context

MIB
LUM-IFAMPLIFIER-MIB
OID
.1.3.6.1.4.1.8708.2.65.2.2.1.1.8
Type
column
Access
readwrite
Status
current
Default
down
Parent
ifAmplifierAmplifierEntry
Groups
4

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFAMPLIFIER-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFAMPLIFIER-MIB::ifAmplifierAmplifierAdminStatus'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'LUM-IFAMPLIFIER-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFAMPLIFIER-MIB::ifAmplifierAmplifierAdminStatus.<ifAmplifierAmplifierIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'LUM-IFAMPLIFIER-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LUM-IFAMPLIFIER-MIB::ifAmplifierAmplifierAdminStatus'

Syntax

LUM-TCAdminStatusWithNA
Source
LUM-TCAdminStatusWithNA
Base type
Enumeration
Type Description
The administrative state for an interface.
          
down - The interface should be inactive.
          
service - The board/interface is activated but
alarms are suppressed. Intended for use during
service or re-configuration. When service is
concluded adminStatus should be set to 'up'
again.
          
up - The interface should be activated when
it becomes available. Alarms are not suppressed.
          
notApplicable - used to tell that attribute
is not used in current configuration.

Values & Constraints

Type Values
1down
2service
3up
2147483647notApplicable

Conformance

Member of
ifAmplifierAmplifierGroupV1 ifAmplifierAmplifierGroupV2 ifAmplifierAmplifierGroupV3 ifAmplifierAmplifierGroupV4