LUM-IFAMPLIFIER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
78

ifAmplifierAmplifierTable

table
.1.3.6.1.4.1.8708.2.65.2.2.1 · 1 row entry · 18 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifAmplifierAmplifierTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFAMPLIFIER-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFAMPLIFIER-MIB::ifAmplifierAmplifierTable' 
The amplifier group contains information and
configuration for all amplifier objects.
The group is used for objects common for any amplifier type.
ifAmplifierAmplifierEntry row .1.3.6.1.4.1.8708.2.65.2.2.1.1
An entry in the ifAmplifier amplifier list.
Indexes
Column Syntax OID
ifAmplifierAmplifierIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.1
ifAmplifierAmplifierName
The management name of the amplifier object.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.2
ifAmplifierAmplifierUId
A unique identifier assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.3
ifAmplifierAmplifierRxPower
The received signal power level in units of 0.1 dBm.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.4
ifAmplifierAmplifierTxPower
The transmitted power level in units of 0.1 dBm.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.5
ifAmplifierAmplifierWantedGain
The wanted signal gain setting in units of 0.1 dB.
Set your wanted gain = [fiber loss + mid stage loss].
When setting the wanted gain on Raman boards,
[fiber loss + 3] if DCM is installed between Raman output (port 7) a…
LUM-TCSigned32WithNAr/w
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.6
ifAmplifierAmplifierActualGain
Actual measured gain in units of 0.1 dB.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.7
ifAmplifierAmplifierAdminStatus
The administrative state of the interface.

up - The interface is active.
Pump(s) are activated if all activation criteria are fulfilled.

down - The interface is de-activated. All pumps…
LUM-TCAdminStatusWithNAr/w
Type Values:
1down
2service
3up
2147483647notApplicable
Description:
The administrative state for an interface.

down - The interface should be inactive.

service - The board/interface is activated but
alarms are suppressed. Intended for use during
service or re-confi…
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.8
ifAmplifierAmplifierOperStatus
The operational state of the interface.

notPresent - The interface is not available.

down - The interface is de-activated or there are
faults preventing its transition to the 'up' state.
…
LUM-TCOperStatusWithNA
Type Values:
1notPresent
2down
3up
2147483647notApplicable
Description:
The operational state for a interface.

notPresent - The interface is not available.

down - The interface is de-activated or
there are faults preventing it from going to the
'up'-state.

u…
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.9
ifAmplifierAmplifierMidStageLoss
The calculated loss between Raman output power and EDFA input power in units of 0.1dB.
Typically around 0 if no DCM between the Raman output and EDFA input.
Typically around 3 if DCM is installed between the Raman outpu…
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.10
ifAmplifierAmplifierTxIfIndex
The index number of the associated Tx port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.11
ifAmplifierAmplifierRxIfIndex
The index number of the associated Rx port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.12
ifAmplifierAmplifierSubrack
The subrack of the entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.13
ifAmplifierAmplifierSlot
The slot of the entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.14
ifAmplifierAmplifierOutputPowerFail
Output power failed alarm. If the difference of wanted gain
and actual gain is larger than the safety margin and if the difference of
output power and transmit power limit is larger than 0.7 dB
the amplifier is not work…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.15
ifAmplifierAmplifierSaturation
Saturation alarm. If the difference of wanted gain and actual gain
is larger than 1.0 dB (safety margin) the amplifier is considered saturated.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.16
ifAmplifierAmplifierFunctionalType
The functional type of amplifier. This attribute is ONLY used
to describe how the amplifier is used and traffic is not affected if changed.

undefined - default

preAmp - pre-ampli…
Enumerationr/w
Enumerated Values:
1undefined
2preAmp
3offLinePreAmp
4lineAmp
5booster
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.17
ifAmplifierAmplifierDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.65.2.2.1.1.18

ifAmplifierModuleTable

table
.1.3.6.1.4.1.8708.2.65.2.3.1 · 1 row entry · 15 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifAmplifierModuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFAMPLIFIER-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFAMPLIFIER-MIB::ifAmplifierModuleTable' 
The module group contains information and
configuration for all module objects.
The group is used for representation of hardware modules on the board.
ifAmplifierModuleEntry row .1.3.6.1.4.1.8708.2.65.2.3.1.1
An entry in the ifAmplifier module list.
Indexes
Column Syntax OID
ifAmplifierModuleIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.1
ifAmplifierModuleName
The management name of the module object.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.2
ifAmplifierModuleUId
A unique identifier assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.3
ifAmplifierModuleTemperature
The actual module temperature in units of
0.1 degrees Celsius.
LUM-TCInteger32WithNA
Type Constraints:
range: 0..2147483647
Description:
An Integer32 of an object between 0 and 2147483645.
2147483647 is used to indicate that the attribute
is not used on the object.
2147483646 is used to indicate that the attribute is not
available currently
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.4
ifAmplifierModuleInfo
Module information about firmware and serial number of the module on the board.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.5
ifAmplifierModuleHighModuleTemperature
The actual temperature is over the module internal temperature alarm threshold.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.6
ifAmplifierModuleHighPumpCurrent
The actual pump current of any pump in the module
is over the module internal pump current alarm threshold.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.7
ifAmplifierModuleHighPumpTemperature
The actual pump temperature of any pump in the module
is over the module internal pump temperature alarm threshold.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.8
ifAmplifierModuleCommunicationFailure
Communication between the module and the traffic unit has
failed.

A: The module does not respond.

D: Communication works.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.9
ifAmplifierModuleColdRestartdeprecated
Software initiated cold restart of the Amplifier Module.
Cold restart process may take a few seconds, during this period traffic
will be disturbed.
Note: The cold restart is applied on all available modules of the board…
Enumerationr/w
Enumerated Values:
1doSoftwareColdRestart
2doNotSoftwareColdRestart
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.10
ifAmplifierModuleSubrack
The subrack of the entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.11
ifAmplifierModuleSlot
The slot of the entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.12
ifAmplifierModuleAnalogueTemperature
The internal temperature in units of 0.1 degrees Celsius.
LUM-TCInteger32WithNA
Type Constraints:
range: 0..2147483647
Description:
An Integer32 of an object between 0 and 2147483645.
2147483647 is used to indicate that the attribute
is not used on the object.
2147483646 is used to indicate that the attribute is not
available currently
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.13
ifAmplifierModuleAnalogueModuleTemperatureHigh
Above allowed module enabling criteria 75 degrees Celsius - waiting for the module to be cooled.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.14
ifAmplifierModuleAnalogueModuleTemperatureLow
Below allowed module enabling criteria 5 degrees Celsius - waiting for the module to be heated.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.65.2.3.1.1.15

ifAmplifierRamanTable

table
.1.3.6.1.4.1.8708.2.65.2.4.1 · 1 row entry · 22 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifAmplifierRamanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFAMPLIFIER-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFAMPLIFIER-MIB::ifAmplifierRamanTable' 
The Raman group contains information and
configuration for all Raman objects.
The group is used for representation of amplifiers of Raman type.
ifAmplifierRamanEntry row .1.3.6.1.4.1.8708.2.65.2.4.1.1
An entry in the ifAmplifier Raman list.
Indexes
Column Syntax OID
ifAmplifierRamanIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.1
ifAmplifierRamanName
The management name of the Raman object.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.2
ifAmplifierRamanUId
A unique identifier assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.3
ifAmplifierRamanLineFiberType
Line fiber type setting for the Raman amplifier.
Enumerationr/w
Enumerated Values:
1ftG652
2ftG655
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.4
ifAmplifierRamanWantedGainTilt
The wanted Raman gain tilt. A negative value will amplify
shorter wavelengths more than longer wavelengths.
LUM-TCSigned32WithNAr/w
Constraints:
range: -15-5
range: 2147483647-2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.5
ifAmplifierRamanReceivedPowerLevel
The received power level on the Raman input interface.
The presented power level includes both signal and optical noise.
In contrast Raman Rx power level only presents signal input.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.6
ifAmplifierRamanPump1Power
Pump power of the first Raman pump in units of 0.1 dBm.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.7
ifAmplifierRamanPump1Status
Status of the first Raman pump. Can take values on or off.
Enumeration
Enumerated Values:
0off
1on
2147483646notAvailable
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.8
ifAmplifierRamanPump2Power
Pump power of the second Raman pump in units of 0.1 dBm.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.9
ifAmplifierRamanPump2Status
Status of the second Raman pump. Can take values on or off.
Enumeration
Enumerated Values:
0off
1on
2147483646notAvailable
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.10
ifAmplifierRamanTotalPumpPower
Combined Raman Pumps power in units of 0.1 dBm.
This is the total optical power that will enter through Raman Rx port into the line fiber.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.11
ifAmplifierRamanBackReflectionPower
The Back reflected power of the Raman pump in units of 0.1 dBm.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.12
ifAmplifierRamanBackReflectionPowerRatio
The Back reflected power ratio of the Raman pump.
This parameter is calculated by dividing the Total pump power by
the back reflected power of the Raman.
Presented in units of 0.1 dB.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.13
ifAmplifierRamanHighBackReflection
High Back Reflection. When back reflection power ratio
is below the High back reflection threshold the alarm is activated.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.14
ifAmplifierRamanHighBackReflectionThld
High Back Reflection Threshold. The threshold to trigger
the High back reflection alarm.
LUM-TCSigned32WithNAr/w
Constraints:
range: 200-280
range: 2147483647-2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.15
ifAmplifierRamanPointInsertionLoss
Point Insertion Loss. The calculated insertion loss between
the Raman pump and line fiber. Value is given in units of 0.1 dB.
Recommended value is between 0.0 and -0.5 dB.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.16
ifAmplifierRamanPointInsertionLossThld
Point Insertion Loss Threshold. Settable threshold for High point
insertion loss alarm. If Point insertion loss is more negative than
threshold High point insertion loss alarm will be activated.
The recommended value fo…
LUM-TCSigned32WithNAr/w
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.17
ifAmplifierRamanHighPointInsertionLoss
High Point Insertion Loss. If Point insertion loss is below Point insertion loss threshold
High point insertion loss alarm will be activated.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.18
ifAmplifierRamanRelatedAmplifierIndex
The index number of the associated Amplifier object.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.19
ifAmplifierRamanSubrack
The subrack of the entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.20
ifAmplifierRamanSlot
The slot of the entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.21
ifAmplifierRamanActualGain
The actual gain contribution of the Raman amplifier stage.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.4.1.1.22

ifAmplifierEdfaTable

table
.1.3.6.1.4.1.8708.2.65.2.5.1 · 1 row entry · 23 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifAmplifierEdfaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFAMPLIFIER-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFAMPLIFIER-MIB::ifAmplifierEdfaTable' 
The edfa group contains information and
configuration for all EDFA objects.
The group is used for representation of amplifiers of EDFA type.
ifAmplifierEdfaEntry row .1.3.6.1.4.1.8708.2.65.2.5.1.1
An entry in the ifAmplifier EDFA list.
Indexes
Column Syntax OID
ifAmplifierEdfaIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.1
ifAmplifierEdfaName
The management name of the EDFA object.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.2
ifAmplifierEdfaUId
A unique identifier assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.3
ifAmplifierEdfaWantedGainTilt
The wanted EDFA gain tilt. A negative value will amplify
shorter wavelengths more than longer wavelengths.

Range and default value depends on type of amplifier.

Name …
LUM-TCSigned32WithNAr/w
Constraints:
range: -20-0
range: 2147483647-2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.4
ifAmplifierEdfaTxPowerLimit
Settable limit for maximum allowed output power.

Range and default value depends on type of amplifier.

Name Min Max Default
OARAED21/HG 15.0 21…
LUM-TCSigned32WithNAr/w
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.5
ifAmplifierEdfaPumpStatus
Status of the EDFA pump. Can take values on or off.
Enumeration
Enumerated Values:
0off
1on
2147483646notAvailable
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.6
ifAmplifierEdfaBackReflectionPower
The Back reflected power of the EDFA output in units of 0.1 dBm.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.7
ifAmplifierEdfaBackReflectionPowerRatio
The Back reflected power ratio of the EDFA output.
This parameter is calculated by dividing the EDFA
output power by the back reflected power of the EDFA.
Presented in units of 0.1 dB.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.8
ifAmplifierEdfaHighBackReflection
High Back Reflection. When back reflection power ratio
is below the High back reflection threshold the alarm is activated.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.9
ifAmplifierEdfaHighBackReflectionThld
High Back Reflection Threshold.
The threshold to trigger the High back reflection alarm.
LUM-TCSigned32WithNAr/w
Constraints:
range: 200-280
range: 2147483647-2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.10
ifAmplifierEdfaSaturationdeprecated
Saturation alarm. If the difference of wanted gain and actual gain
is larger than 1.0 dB the amplifier is considered saturated.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.11
ifAmplifierEdfaMonitorPortLoss
Monitor port loss. The difference in attenuation between EDFA output and EDFA monitor port.
This is a value that is module specific and is presented in units of 0.1 dB.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.12
ifAmplifierEdfaRelatedAmplifierIndex
The index number of the associated Amplifier object.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.13
ifAmplifierEdfaSubrack
The subrack of the entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.14
ifAmplifierEdfaSlot
The slot of the entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.15
ifAmplifierEdfaPumpPower
Pump power of the EDFA pump in units of 0.1 dBm.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.16
ifAmplifierEdfaPumpCurrent
Pump current of the EDFA pump in units of 0.1 mA.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.17
ifAmplifierEdfaActualGain
The actual gain contribution of the EDFA amplifier stage.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.18
ifAmplifierEdfaLaserForcedOn
When enabled, the laser control is on regardless of
whether there is an input signal present or not.

disabled - the laser control is activated first
after input signal is detected
…
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.19
ifAmplifierEdfaPump1Current
Pump current of the (first) EDFA pump in units of 0.1 mA.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.20
ifAmplifierEdfaPump2Current
Pump current of the second EDFA pump (if applicable) in units of 0.1 mA.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.21
ifAmplifierEdfaTxFilterLoss
OSC filter loss of the Tx port.
LUM-TCInteger32WithNA
Type Constraints:
range: 0..2147483647
Description:
An Integer32 of an object between 0 and 2147483645.
2147483647 is used to indicate that the attribute
is not used on the object.
2147483646 is used to indicate that the attribute is not
available currently
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.22
ifAmplifierEdfaRxFilterLoss
OSC filter loss of the Rx port.
LUM-TCInteger32WithNA
Type Constraints:
range: 0..2147483647
Description:
An Integer32 of an object between 0 and 2147483645.
2147483647 is used to indicate that the attribute
is not used on the object.
2147483646 is used to indicate that the attribute is not
available currently
 .1.3.6.1.4.1.8708.2.65.2.5.1.1.23