iccpRgCreateMcLag

LUM-ICCP-MIB · .1.3.6.1.4.1.8708.2.61.2.3.1.1.18
MIB view Table view

Object

column LUM-TCCommandString 
Create a Multi-Chassis Link Aggregation Group (MC-LAG).
              
Node ID -               This MUST be unique in a Redundancy Group (RG). Be sure to use different values for both PE:s in the RG. The node ID is used in mLACP to ensure
                        uniqueness of LACP port numbers.
              
ICCP -                  Select a RG. This must be created beforehand.
              
LAG -                   Select the LAG that should be protected. NOTE! LACP must be enabled on the LAG.
              
Administrative
system priority -       This is the administrative system priority for this MC-LAG. This will be used in the negotiation with the other PE in the
                        RG which system parameters to use in LACPDU:s. Both PE:s will automatically agree on the same system priority, system id and key.
              
Administrative
port priority -         This port priority is used on all ports in the LAG.

Context

MIB
LUM-ICCP-MIB
OID
.1.3.6.1.4.1.8708.2.61.2.3.1.1.18
Type
column
Access
readonly
Status
current
Parent
iccpRgEntry
Table
iccpRgTable
Siblings
18

Syntax

LUM-TCCommandString
Source
LUM-TCCommandString
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
iccpRgIndex
An arbitrary index assigned to each entry.
columnUnsigned32.1.3.6.1.4.1.8708.2.61.2.3.1.1.1
iccpRgMepId
For internal use only.
columnUnsigned32.1.3.6.1.4.1.8708.2.61.2.3.1.1.10
iccpRgMegGroupId
For internal use only.
columnUnsigned32.1.3.6.1.4.1.8708.2.61.2.3.1.1.11
iccpRgMegLevel
For internal use only.
columnUnsigned32.1.3.6.1.4.1.8708.2.61.2.3.1.1.12
iccpRgVlanId
For internal use only.
columnUnsigned32.1.3.6.1.4.1.8708.2.61.2.3.1.1.13
iccpRgState
nonExistent - A connect message has not yet been sent to the peer mep. connecting - Periodical connect messages are being sent to the peer mep. operational - A connect message has…
columnEnumeration.1.3.6.1.4.1.8708.2.61.2.3.1.1.14
iccpRgApplicationState
nonExistent - The ICCP RG state is not operational. reset - The ICCP RG state has transitioned to operational. connectSent - An application connect message been sent to the peer m…
columnEnumeration.1.3.6.1.4.1.8708.2.61.2.3.1.1.15
iccpRgInternalReference
For internal use only.
columnUnsigned32.1.3.6.1.4.1.8708.2.61.2.3.1.1.16
iccpRgApplication
ICCP-RG State nonExistent - This state indicates that the Application Connection does not exist since there is no ICCP connection between the PEs. connecting - This state indicate…
columnEnumeration.1.3.6.1.4.1.8708.2.61.2.3.1.1.17
iccpRgCommunicationFailure
alarm - The MEP has either the Remote CCM or RDI CCM alarm set or the ICCP RG state is not operational ok - The MEP does not have the Remote CCM or RDI CCM alarm se…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.61.2.3.1.1.19
iccpRgName
The management name of the Redundancy Group, for example 'iccpRg:1:2:1' (iccpRg:[subrack]:[slot]:[redundancyGroupId])
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.61.2.3.1.1.2
iccpRgDescr
User configurable label.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.61.2.3.1.1.3
iccpRgRedundancyGroupId
The Group ID used by all of its members.
columnUnsigned32.1.3.6.1.4.1.8708.2.61.2.3.1.1.4
iccpRgRedundancyObjectId
For internal use only.
columnUnsigned32.1.3.6.1.4.1.8708.2.61.2.3.1.1.5
iccpRgPeerMacAddress
User configurable label.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.8708.2.61.2.3.1.1.6
iccpRgPortId
For internal use only.
columnUnsigned32.1.3.6.1.4.1.8708.2.61.2.3.1.1.7
iccpRgMepName
The management name of the mep used for communication.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.61.2.3.1.1.8
iccpRgMepMaid
The management name of the mep maid used for communication.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.61.2.3.1.1.9