LUM-ICCP-MIB

        The MIB module for management of ICCP.
        
The tables contained in this MIB are:
        
(1) The General group contains some general attributes as time stamps
    and tables sizes.
        
(2) The Node table contains each individual ICCP node.
    Every board in the physical node that supports ICCP
    is considered an individual ICCP node.
        
(3) The Rg table contains information and configuration for ICCP tunnel,
    which is a connection between two Label Switch Router, LSRs.
    
Source file
LUM-ICCP-MIB
Last revised
Identity
lumIccpMIBModule
Base OID
1.3.6.1.4.1.8708.1.1.61
Imported Objects
LUM-REG lumIccpMIB lumModules
LUM-TC CommandString FaultStatus MgmtNameString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DateAndTime DisplayString MacAddress TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the infinera MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'LUM-ICCP-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LUM-ICCP-MIB::lumIccpMIBModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-ICCP-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-ICCP-MIB::lumIccpMIBModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (40)
.1.3.6.1.4.1.8708.1.1.61
.1.3.6.1.4.1.8708.2.61.1
.1.3.6.1.4.1.8708.2.61.1.1
.1.3.6.1.4.1.8708.2.61.1.2
.1.3.6.1.4.1.8708.2.61.2
.1.3.6.1.4.1.8708.2.61.2.1
.1.3.6.1.4.1.8708.2.61.2.1.1
.1.3.6.1.4.1.8708.2.61.2.1.2
.1.3.6.1.4.1.8708.2.61.2.1.3
.1.3.6.1.4.1.8708.2.61.2.1.4
.1.3.6.1.4.1.8708.2.61.2.2
.1.3.6.1.4.1.8708.2.61.2.2.1
.1.3.6.1.4.1.8708.2.61.2.2.1.1
Unsigned32
.1.3.6.1.4.1.8708.2.61.2.2.1.1.1
.1.3.6.1.4.1.8708.2.61.2.2.1.1.2
.1.3.6.1.4.1.8708.2.61.2.2.1.1.3
.1.3.6.1.4.1.8708.2.61.2.2.1.1.4
Unsigned32
.1.3.6.1.4.1.8708.2.61.2.2.1.1.5
.1.3.6.1.4.1.8708.2.61.2.3
.1.3.6.1.4.1.8708.2.61.2.3.1
.1.3.6.1.4.1.8708.2.61.2.3.1.1
Unsigned32
.1.3.6.1.4.1.8708.2.61.2.3.1.1.1
Unsigned32
.1.3.6.1.4.1.8708.2.61.2.3.1.1.10
Unsigned32
.1.3.6.1.4.1.8708.2.61.2.3.1.1.11
Unsigned32
.1.3.6.1.4.1.8708.2.61.2.3.1.1.12
Unsigned32
.1.3.6.1.4.1.8708.2.61.2.3.1.1.13
Enumeration
.1.3.6.1.4.1.8708.2.61.2.3.1.1.14
Enumeration
.1.3.6.1.4.1.8708.2.61.2.3.1.1.15
Unsigned32
.1.3.6.1.4.1.8708.2.61.2.3.1.1.16
Enumeration
.1.3.6.1.4.1.8708.2.61.2.3.1.1.17
.1.3.6.1.4.1.8708.2.61.2.3.1.1.18
.1.3.6.1.4.1.8708.2.61.2.3.1.1.19
.1.3.6.1.4.1.8708.2.61.2.3.1.1.2
.1.3.6.1.4.1.8708.2.61.2.3.1.1.3
Unsigned32
.1.3.6.1.4.1.8708.2.61.2.3.1.1.4
Unsigned32
.1.3.6.1.4.1.8708.2.61.2.3.1.1.5
.1.3.6.1.4.1.8708.2.61.2.3.1.1.6
Unsigned32
.1.3.6.1.4.1.8708.2.61.2.3.1.1.7
.1.3.6.1.4.1.8708.2.61.2.3.1.1.8
.1.3.6.1.4.1.8708.2.61.2.3.1.1.9
Dependencies (5) 5 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. LUM-REGinfinera
  3. SNMPv2-TCrfc
  4. LUM-TCinfinera
  5. SNMPv2-CONFrfc
  6. LUM-ICCP-MIBinfineraselected
Type Definitions (2)
Unsigned32 range: 0..65535
Display format: d
ICCP identifier type, 16-bit integer.
Unsigned32 range: 0..1048575
Display format: d
ICCP label with actual label range 16-1048575, 0-15 is reserved.
Compliance Statements (1)

OID .1.3.6.1.4.1.8708.2.61.1.2.1
Basic implementation requirements for the ICCP MIB. (R24.0)
Required groups