clientIfOHTransparencyString

LUM-CLIENT-MIB · .1.3.6.1.4.1.8708.2.27.2.2.1.1.115
Commands MIB view Table view

Object

column SNMPv2-TCDisplayString 
OH transparency bytes tells if J0, rest
of RSOH/Section OH and/or MSOH/Line OH are
transparent or not.
When RSOH/Section OH is set to transparent the bytes
E1, F1, D1-D3 and B1 is transported tran-
sparent from client to line and vice versa.
When MSOH is set to transparent the bytes E2,
D4-D12, B2 and K1K2 are sent transported
transparent from client to line.

Context

MIB
LUM-CLIENT-MIB
OID
.1.3.6.1.4.1.8708.2.27.2.2.1.1.115
Type
column
Access
readonly
Status
current
Default
""
Parent
clientIfEntry
Groups
21

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-CLIENT-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-CLIENT-MIB::clientIfOHTransparencyString'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'LUM-CLIENT-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-CLIENT-MIB::clientIfOHTransparencyString.<clientIfIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'LUM-CLIENT-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LUM-CLIENT-MIB::clientIfOHTransparencyString'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255

Conformance

Member of
clientIfGroupV13 clientIfGroupV14 clientIfGroupV15 clientIfGroupV16 clientIfGroupV17 clientIfGroupV18 clientIfGroupV19 clientIfGroupV20 clientIfGroupV21 clientIfGroupV22 clientIfGroupV23 clientIfGroupV24 clientIfGroupV25 clientIfGroupV26 clientIfGroupV27 clientIfGroupV28 clientIfGroupV29 clientIfGroupV30 clientIfGroupV31 clientIfGroupV32 clientIfGroupV33