clientIfJ1TxTrailTrace

LUM-CLIENT-MIB · .1.3.6.1.4.1.8708.2.27.2.2.1.1.70
Commands MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
The J1 trail trace identifier(s) to be
transmitted for the VC4s/VC3s related to this
interface, in the line signal (STM16/OC48).
              
This parameter can be used in two different
modes, see j1TxTrailTraceInsertionMode.
The insertionMode therefore decides what
the transmitted string actually will look
like.
              
Set to empty string for default value:
              
<IP address><space><subrack><slot><interface>
xx.xx               y        w     z
=> 'xx.xx ywz'
where:
<IP address>: xx.xx
   The last 2 octets coded in hex.
   5 bytes.
<space>:      1 byte.
<subrack>:    y
   The subrack number coded in hex.
   1 byte.
<slot>:       w
   The slot position coded n hex.
   Slot 16 and 17 will be coded as 0
   and 1 respectively.
   1 byte.
<interface>:       z
    The logical numbering of the client interface
    coded in hex.
    Interface 1 <=> ports 1-2
              2 <=>       3-4
             10 <=>      19-20
    1 byte

Context

MIB
LUM-CLIENT-MIB
OID
.1.3.6.1.4.1.8708.2.27.2.2.1.1.70
Type
column
Access
readwrite
Status
current
Default
""
Parent
clientIfEntry
Groups
28

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-CLIENT-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-CLIENT-MIB::clientIfJ1TxTrailTrace'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'LUM-CLIENT-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-CLIENT-MIB::clientIfJ1TxTrailTrace.<clientIfIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'LUM-CLIENT-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LUM-CLIENT-MIB::clientIfJ1TxTrailTrace'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Object Constraints
range: 0-15
Type Constraints
range: 0..255

Conformance

Member of
clientIfGroupV10 clientIfGroupV11 clientIfGroupV12 clientIfGroupV13 clientIfGroupV14 clientIfGroupV15 clientIfGroupV16 clientIfGroupV17 clientIfGroupV18 clientIfGroupV19 clientIfGroupV20 clientIfGroupV21 clientIfGroupV22 clientIfGroupV23 clientIfGroupV24 clientIfGroupV25 clientIfGroupV26 clientIfGroupV27 clientIfGroupV28 clientIfGroupV29 clientIfGroupV30 clientIfGroupV31 clientIfGroupV32 clientIfGroupV33 clientIfGroupV6 clientIfGroupV7 clientIfGroupV8 clientIfGroupV9