juniIpsecTunnelTransportVirtualRouter

Juniper-IPsec-Tunnel-MIB · .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.4
MIB view Table view

Object

column r/w Juniper-TCJuniName 
The transport virtual router associated with this IPsec tunnel
interface.  This object need not be set when creating row entries.  Note
that the default when this object is not specified is the router
associated with the agent acting on the management request.

Context

MIB
Juniper-IPsec-Tunnel-MIB
OID
.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.4
Type
column
Access
readwrite
Status
current
Parent
juniIpsecTunnelInterfaceEntry
Table
juniIpsecTunnelInterfaceTable
Siblings
36

Syntax

Juniper-TCJuniName
Source
Juniper-TCJuniName
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..256

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
juniIpsecTunnelIfIndex
The ifIndex of the IPsec tunnel interface. When creating entries in this table, suitable values for this object are determined by reading juniIpsecTunnelNextIfIndex.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.1
juniIpsecTunnelSrcName
The tunnel source Name.
columnOctetString.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.10
juniIpsecTunnelDstType
The tunnel destination type. The tunnel destination may be identified by: 1. an IP(V4) address, or 2. a fully qualified domain name string, or 3. a user fully qualifi…
columnJuniIpsecIdentityType.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.11
juniIpsecTunnelDstAddr
The tunnel destination IP(V4) address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.12
juniIpsecTunnelDstName
The tunnel destination Name.
columnOctetString.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.13
juniIpsecTunnelBackupDstType
The tunnel backup destination type. The tunnel backup destination type has to be the same as the tunnel destination type The tunnel destination may be identified by: 1. …
columnJuniIpsecIdentityType.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.14
juniIpsecTunnelBackupDstAddr
The tunnel backup destination IP(V4) address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.15
juniIpsecTunnelBackupDstName
The tunnel backup destination Name.
columnOctetString.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.16
juniIpsecTunnelLocalIdType
The tunnel phase-2 local identity type. The tunnel local identity type may be identified by: 1. an IP address, or 2. an IP address subnet, or 3. an IP address range.
columnJuniIpsecIdentityType.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.17
juniIpsecTunnelLocalIdAddr1
The tunnel local phase-2 identity IP address 1.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.18
juniIpsecTunnelLocalIdAddr2
The tunnel local phase-2 identity IP address 2 in the case the identity type is an IP address range. The tunnel local phase-2 identity netmask in the case the identity type is an …
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.19
juniIpsecTunnelName
The administratively assigned name for this IPsec Tunnel interface. Before configuring other tunnel attributes, IPsec tunnel has to be created with minimum attributes (tunnel name…
columnOctetString.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.2
juniIpsecTunnelRemoteIdType
The tunnel phase-2 remote identity type. The tunnel remote identity type may be identified by: 1. an IP address, or 2. an IP address subnet, or 3. an IP address range.
columnJuniIpsecIdentityType.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.20
juniIpsecTunnelRemoteIdAddr1
The tunnel remote phase-2 identity IP address 1.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.21
juniIpsecTunnelRemoteIdAddr2
The tunnel remote phase-2 identity IP address 2 in the case the identity type is an IP address range. The tunnel remote phase-2 identity netmask in the case the identity type is a…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.22
juniIpsecTunnelLifeTimeSecs
The tunnel lifetime in seconds.
columnseconds Unsigned32.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.23
juniIpsecTunnelLifeTimeKBs
The tunnel lifetime in kilobytes.
columnkilobytes Unsigned32.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.24
juniIpsecTunnelPfsGroup
The tunnel perfect forward secrecty group.
columnJuniIpsecPfsGroup.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.25
juniIpsecTunnelMtu
The tunnel MTU.
columnUnsigned32.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.26
juniIpsecTunnelInboundSpi1
The tunnel inbound SPI 1.
columnSpi.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.27
juniIpsecTunnelInboundTransform1
The tunnel inbound transform 1.
columnJuniIpsecTransformType.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.28
juniIpsecTunnelInboundSpi2
The tunnel inbound SPI 2.
columnSpi.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.29
juniIpsecTunnelType
The configured mode for this IPsec Tunnel interface.
columnJuniIpsecTunnelType.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.3
juniIpsecTunnelInboundTransform2
The tunnel inbound transform 2.
columnJuniIpsecTransformType.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.30
juniIpsecTunnelInboundSpi3
The tunnel inbound SPI 3.
columnSpi.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.31
juniIpsecTunnelInboundTransform3
The tunnel inbound transform 3.
columnJuniIpsecTransformType.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.32
juniIpsecTunnelInboundSpi4
The tunnel inbound SPI 4.
columnSpi.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.33
juniIpsecTunnelInboundTransform4
The tunnel inbound transform 4.
columnJuniIpsecTransformType.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.34
juniIpsecTunnelOutboundSpi
The tunnel outbound SPI.
columnSpi.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.35
juniIpsecTunnelOutboundTransform
The tunnel outbound transform.
columnJuniIpsecTransformType.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.36
juniIpsecTunnelRowStatus
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy …
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.37
juniIpsecTunnelLocalEndPt
The tunnel local endpoint.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.5
juniIpsecTunnelRemoteEndPt
The tunnel remote endpoint.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.6
juniIpsecTunnelTransformSet
The transform set. It refers to a transform set that is defined in the transform set table.
columnOctetString.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.7
juniIpsecTunnelSrcType
The tunnel source type. The tunnel source may be identified by: 1. an IP(V4) address, or 2. a fully qualified domain name string, or 3. a user fully qualified domain name string.
columnJuniIpsecIdentityType.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.8
juniIpsecTunnelSrcAddr
The tunnel source IP(V4) address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.9