Juniper-IPsec-Tunnel-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
65

juniIpsecTunnelInterfaceTable

table
.1.3.6.1.4.1.4874.2.2.70.1.1.2 · 1 row entry · 37 columns
Open in standard view 
This table contains entries of IPsec Tunnel interfaces.
juniIpsecTunnelInterfaceEntry entry .1.3.6.1.4.1.4874.2.2.70.1.1.2.1
Each entry describes the characteristics of a single IPsec Tunnel
interface.

Creating/deleting entries in this table causes corresponding entries for
be created/deleted in ifTable/ifXTable/juniIfTable.
Indexes
juniIpsecTunnelIfIndex
Column Syntax OID
juniIpsecTunnelIfIndex
The ifIndex of the IPsec tunnel interface. When creating entries in
this table, suitable values for this object are determined by reading
juniIpsecTunnelNextIfIndex.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.1
juniIpsecTunnelName
The administratively assigned name for this IPsec Tunnel interface.
Before configuring other tunnel attributes, IPsec tunnel has to be
created with minimum attributes (tunnel name and rowStatus).
OctetStringr/w
Constraints:
range: 0-80
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.2
juniIpsecTunnelType
The configured mode for this IPsec Tunnel interface.
JuniIpsecTunnelTyper/w
Textual Convention: JuniIpsecTunnelType Enumeration
Type Values:
0signaledTunnel
1manualTunnel
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.3
juniIpsecTunnelTransportVirtualRouter
The transport virtual router associated with this IPsec tunnel
interface. This object need not be set when creating row entries. Note
that the default when this object is not specified is the router
associated with th…
Juniper-TCJuniNamer/w
Textual Convention: Juniper-TCJuniName OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.4
juniIpsecTunnelLocalEndPt
The tunnel local endpoint.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.5
juniIpsecTunnelRemoteEndPt
The tunnel remote endpoint.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.6
juniIpsecTunnelTransformSet
The transform set. It refers to a transform set that is defined in
the transform set table.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.7
juniIpsecTunnelSrcType
The tunnel source type. The tunnel source may be identified by:
1. an IP(V4) address, or
2. a fully qualified domain name string, or
3. a user fully qualified domain name string.
JuniIpsecIdentityTyper/w
Textual Convention: JuniIpsecIdentityType Enumeration
Type Values:
0reserved
1idIpv4Addr
2idFqdn
3idUserFqdn
4idIpv4AddrSubnet
5idIpv6Addr
6idIpv6AddrSubnet
7idIpv4AddrRange
8idIpv6AddrRange
9idDn
10idDerAsn1Gn
11idKeyId
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.8
juniIpsecTunnelSrcAddr
The tunnel source IP(V4) address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.9
juniIpsecTunnelSrcName
The tunnel source Name.
OctetStringr/w
Constraints:
range: 0-80
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.10
juniIpsecTunnelDstType
The tunnel destination type. The tunnel destination may be identified
by:
1. an IP(V4) address, or
2. a fully qualified domain name string, or
3. a user fully qualified domain name string.
JuniIpsecIdentityTyper/w
Textual Convention: JuniIpsecIdentityType Enumeration
Type Values:
0reserved
1idIpv4Addr
2idFqdn
3idUserFqdn
4idIpv4AddrSubnet
5idIpv6Addr
6idIpv6AddrSubnet
7idIpv4AddrRange
8idIpv6AddrRange
9idDn
10idDerAsn1Gn
11idKeyId
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.11
juniIpsecTunnelDstAddr
The tunnel destination IP(V4) address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.12
juniIpsecTunnelDstName
The tunnel destination Name.
OctetStringr/w
Constraints:
range: 0-80
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.13
juniIpsecTunnelBackupDstType
The tunnel backup destination type. The tunnel backup destination
type has to be the same as the tunnel destination type
The tunnel destination may be identified by:
1. an IP(V4) address, or
2. a fully qual…
JuniIpsecIdentityTyper/w
Textual Convention: JuniIpsecIdentityType Enumeration
Type Values:
0reserved
1idIpv4Addr
2idFqdn
3idUserFqdn
4idIpv4AddrSubnet
5idIpv6Addr
6idIpv6AddrSubnet
7idIpv4AddrRange
8idIpv6AddrRange
9idDn
10idDerAsn1Gn
11idKeyId
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.14
juniIpsecTunnelBackupDstAddr
The tunnel backup destination IP(V4) address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.15
juniIpsecTunnelBackupDstName
The tunnel backup destination Name.
OctetStringr/w
Constraints:
range: 0-80
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.16
juniIpsecTunnelLocalIdType
The tunnel phase-2 local identity type. The tunnel local identity type
may be identified by:
1. an IP address, or
2. an IP address subnet, or
3. an IP address range.
JuniIpsecIdentityTyper/w
Textual Convention: JuniIpsecIdentityType Enumeration
Type Values:
0reserved
1idIpv4Addr
2idFqdn
3idUserFqdn
4idIpv4AddrSubnet
5idIpv6Addr
6idIpv6AddrSubnet
7idIpv4AddrRange
8idIpv6AddrRange
9idDn
10idDerAsn1Gn
11idKeyId
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.17
juniIpsecTunnelLocalIdAddr1
The tunnel local phase-2 identity IP address 1.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.18
juniIpsecTunnelLocalIdAddr2
The tunnel local phase-2 identity IP address 2 in the
case the identity type is an IP address range.
The tunnel local phase-2 identity netmask in the
case the identity type is an IP address subnet.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.19
juniIpsecTunnelRemoteIdType
The tunnel phase-2 remote identity type. The tunnel remote identity
type may be identified by:
1. an IP address, or
2. an IP address subnet, or
3. an IP address range.
JuniIpsecIdentityTyper/w
Textual Convention: JuniIpsecIdentityType Enumeration
Type Values:
0reserved
1idIpv4Addr
2idFqdn
3idUserFqdn
4idIpv4AddrSubnet
5idIpv6Addr
6idIpv6AddrSubnet
7idIpv4AddrRange
8idIpv6AddrRange
9idDn
10idDerAsn1Gn
11idKeyId
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.20
juniIpsecTunnelRemoteIdAddr1
The tunnel remote phase-2 identity IP address 1.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.21
juniIpsecTunnelRemoteIdAddr2
The tunnel remote phase-2 identity IP address 2 in the
case the identity type is an IP address range.
The tunnel remote phase-2 identity netmask in the
case the identity type is an IP address subnet.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.22
juniIpsecTunnelLifeTimeSecs
The tunnel lifetime in seconds.
secondsUnsigned32r/w
Constraints:
range: 1800-864000
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.23
juniIpsecTunnelLifeTimeKBs
The tunnel lifetime in kilobytes.
kilobytesUnsigned32r/w
Constraints:
range: 102400-4294967295
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.24
juniIpsecTunnelPfsGroup
The tunnel perfect forward secrecty group.
JuniIpsecPfsGroupr/w
Textual Convention: JuniIpsecPfsGroup Enumeration
Type Values:
0noGroup
1group1
2group2
5group5
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.25
juniIpsecTunnelMtu
The tunnel MTU.
Unsigned32r/w
Constraints:
range: 160-9000
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.26
juniIpsecTunnelInboundSpi1
The tunnel inbound SPI 1.
Spi
Textual Convention: Spi Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.27
juniIpsecTunnelInboundTransform1
The tunnel inbound transform 1.
JuniIpsecTransformType
Textual Convention: JuniIpsecTransformType Enumeration
Type Values:
0reserved
1ahMd5
2ahSha
3espDesMd5
4esp3DesMd5
5espDesSha
6esp3DesSha
7espNullMd5
8espNullSha
9espDesNullAuth
10esp3DesNullAuth
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.28
juniIpsecTunnelInboundSpi2
The tunnel inbound SPI 2.
Spi
Textual Convention: Spi Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.29
juniIpsecTunnelInboundTransform2
The tunnel inbound transform 2.
JuniIpsecTransformType
Textual Convention: JuniIpsecTransformType Enumeration
Type Values:
0reserved
1ahMd5
2ahSha
3espDesMd5
4esp3DesMd5
5espDesSha
6esp3DesSha
7espNullMd5
8espNullSha
9espDesNullAuth
10esp3DesNullAuth
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.30
juniIpsecTunnelInboundSpi3
The tunnel inbound SPI 3.
Spi
Textual Convention: Spi Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.31
juniIpsecTunnelInboundTransform3
The tunnel inbound transform 3.
JuniIpsecTransformType
Textual Convention: JuniIpsecTransformType Enumeration
Type Values:
0reserved
1ahMd5
2ahSha
3espDesMd5
4esp3DesMd5
5espDesSha
6esp3DesSha
7espNullMd5
8espNullSha
9espDesNullAuth
10esp3DesNullAuth
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.32
juniIpsecTunnelInboundSpi4
The tunnel inbound SPI 4.
Spi
Textual Convention: Spi Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.33
juniIpsecTunnelInboundTransform4
The tunnel inbound transform 4.
JuniIpsecTransformType
Textual Convention: JuniIpsecTransformType Enumeration
Type Values:
0reserved
1ahMd5
2ahSha
3espDesMd5
4esp3DesMd5
5espDesSha
6esp3DesSha
7espNullMd5
8espNullSha
9espDesNullAuth
10esp3DesNullAuth
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.34
juniIpsecTunnelOutboundSpi
The tunnel outbound SPI.
Spi
Textual Convention: Spi Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.35
juniIpsecTunnelOutboundTransform
The tunnel outbound transform.
JuniIpsecTransformType
Textual Convention: JuniIpsecTransformType Enumeration
Type Values:
0reserved
1ahMd5
2ahSha
3espDesMd5
4esp3DesMd5
5espDesSha
6esp3DesSha
7espNullMd5
8espNullSha
9espDesNullAuth
10esp3DesNullAuth
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.36
juniIpsecTunnelRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create an entry in this …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.37

juniIpsecTunnelStatTable

table
.1.3.6.1.4.1.4874.2.2.70.1.1.3 · 1 row entry · 17 columns
Open in standard view 
The IPsec tunnel interface statistics table.  Describes the IPsec
tunnel inbound/outbound statistics on IPsec de/encapsulation,
de/encryption, and related error statistics.
juniIpsecTunnelStatEntry entry .1.3.6.1.4.1.4874.2.2.70.1.1.3.1
Describes the ipsec traffic statistics of the ipsec tunnel interface.
Indexes
juniIpsecTunnelStatIfIndex
Column Syntax OID
juniIpsecTunnelStatIfIndex
Same value as ifIndex for the corresponding entry in Interfaces
MIB ifTable.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.1
juniIpsecTunnelStatInbUserRecvPkts
The total number of inbound user packets (non-error) received
for this IPsec tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.2
juniIpsecTunnelStatInbUserRecvOctets
The total number of inbound user octets (non-error) received
for this IPsec tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.3
juniIpsecTunnelStatInbAccRecvPkts
The total number of inbound encapsulated packets received for
this IPsec tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.4
juniIpsecTunnelStatInbAccRecvOctets
The total number of inbound encapsulated octets received for
this IPsec tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.5
juniIpsecTunnelStatInbAuthErrs
The total number of inbound packets with authentication errors
received for this IPsec tunnel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.6
juniIpsecTunnelStatInbReplayErrs
The total number of inbound packets with replay errors received
for this IPsec tunnel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.7
juniIpsecTunnelStatInbPolicyErrs
The total number of inbound packets with inbound policy errors
received for this IPsec tunnel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.8
juniIpsecTunnelStatInbOtherRecvErrs
The total number of inbound packets with other Rx errors
received for this IPsec tunnel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.9
juniIpsecTunnelStatInbDecryptErrs
The total number of inbound packets with decryption errors
received for this IPsec tunnel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.10
juniIpsecTunnelStatInbPadErrs
The total number of inbound packets with pad errors
received for this IPsec tunnel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.11
juniIpsecTunnelStatOutbUserRecvPkts
The total number of outbound user packets received
for this IPsec tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.12
juniIpsecTunnelStatOutbUserRecvOctets
The total number of outbound user octets received
for this IPsec tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.13
juniIpsecTunnelStatOutbAccRecvPkts
The total number of encapsulated outbound packets received for
this IPsec tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.14
juniIpsecTunnelStatOutbAccRecvOctets
The total number of encapsulated outbound octets received for
this IPsec tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.15
juniIpsecTunnelOutbOtherTxErrs
The total number of outbound packets with other TX errors
for this IPsec tunnel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.16
juniIpsecTunnelOutbPolicyErrs
The total number of outbound packets with outbound policy
errors for this IPsec tunnel.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.70.1.1.3.1.17

juniIpsecTunnelTransformSetTable

table
.1.3.6.1.4.1.4874.2.2.70.1.1.4 · 1 row entry · 8 columns
Open in standard view 
This table contains entries of IPsec transform sets defined
for this router.
juniIpsecTunnelTransformSetEntry entry .1.3.6.1.4.1.4874.2.2.70.1.1.4.1
Each entry describes a transform set that contains up to 6 IPsec
transforms. The transform set name is referenced by the IPsec tunnel
as its local IPsec policy.
Indexes
juniIpsecTunnelTransformSetName
Column Syntax OID
juniIpsecTunnelTransformSetName
The name of the IPsec tunnel transform set.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.4874.2.2.70.1.1.4.1.1
juniIpsecTunnelTransform1
The first IPsec transform in the transform set.
JuniIpsecTransformTyper/w
Textual Convention: JuniIpsecTransformType Enumeration
Type Values:
0reserved
1ahMd5
2ahSha
3espDesMd5
4esp3DesMd5
5espDesSha
6esp3DesSha
7espNullMd5
8espNullSha
9espDesNullAuth
10esp3DesNullAuth
 .1.3.6.1.4.1.4874.2.2.70.1.1.4.1.2
juniIpsecTunnelTransform2
The second IPsec transform in the transform set.
JuniIpsecTransformTyper/w
Textual Convention: JuniIpsecTransformType Enumeration
Type Values:
0reserved
1ahMd5
2ahSha
3espDesMd5
4esp3DesMd5
5espDesSha
6esp3DesSha
7espNullMd5
8espNullSha
9espDesNullAuth
10esp3DesNullAuth
 .1.3.6.1.4.1.4874.2.2.70.1.1.4.1.3
juniIpsecTunnelTransform3
The third IPsec transform in the transform set.
JuniIpsecTransformTyper/w
Textual Convention: JuniIpsecTransformType Enumeration
Type Values:
0reserved
1ahMd5
2ahSha
3espDesMd5
4esp3DesMd5
5espDesSha
6esp3DesSha
7espNullMd5
8espNullSha
9espDesNullAuth
10esp3DesNullAuth
 .1.3.6.1.4.1.4874.2.2.70.1.1.4.1.4
juniIpsecTunnelTransform4
The fourth IPsec transform in the transform set.
JuniIpsecTransformTyper/w
Textual Convention: JuniIpsecTransformType Enumeration
Type Values:
0reserved
1ahMd5
2ahSha
3espDesMd5
4esp3DesMd5
5espDesSha
6esp3DesSha
7espNullMd5
8espNullSha
9espDesNullAuth
10esp3DesNullAuth
 .1.3.6.1.4.1.4874.2.2.70.1.1.4.1.5
juniIpsecTunnelTransform5
The fifth IPsec transform in the transform set.
JuniIpsecTransformTyper/w
Textual Convention: JuniIpsecTransformType Enumeration
Type Values:
0reserved
1ahMd5
2ahSha
3espDesMd5
4esp3DesMd5
5espDesSha
6esp3DesSha
7espNullMd5
8espNullSha
9espDesNullAuth
10esp3DesNullAuth
 .1.3.6.1.4.1.4874.2.2.70.1.1.4.1.6
juniIpsecTunnelTransform6
The sixth IPsec transform in the transform set.
JuniIpsecTransformTyper/w
Textual Convention: JuniIpsecTransformType Enumeration
Type Values:
0reserved
1ahMd5
2ahSha
3espDesMd5
4esp3DesMd5
5espDesSha
6esp3DesSha
7espNullMd5
8espNullSha
9espDesNullAuth
10esp3DesNullAuth
 .1.3.6.1.4.1.4874.2.2.70.1.1.4.1.7
juniIpsecTunnelTransformSetRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create an entry in this …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.70.1.1.4.1.8

juniIpsecTunnelGlobalLocalEndpointTable

table
.1.3.6.1.4.1.4874.2.2.70.1.1.5 · 1 row entry · 3 columns
Open in standard view 
This table contains entries of global local endpoint for the IPsec
tunnel.  There is one global local endpoint for each transport virtual
router if configured.
juniIpsecTunnelGlobalLocalEndpointEntry entry .1.3.6.1.4.1.4874.2.2.70.1.1.5.1
Each entry defines the global local endpoint for the transport virtual
router.
Indexes
juniIpsecTunnelTransportVrRouterIdx
Column Syntax OID
juniIpsecTunnelTransportVrRouterIdx
The transport virtual router for the global local endpoint.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.70.1.1.5.1.1
juniIpsecTunnelGlobalLocalEndpoint
The global local endpoint for the transport virtual router.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.70.1.1.5.1.2
juniIpsecTunnelGlobalLocalEndpointRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create an entry in this …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.70.1.1.5.1.3