juniIpsecTunnelRowStatus
Juniper-IPsec-Tunnel-MIB ·
.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.37
Object
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniIpsecTunnelIfRowStatus
juniIpsecTunnelName
In addition, when creating an entry the following condition must hold:
A value for juniIpsecTunnelIfIndex must have been determined
previously, typically by reading juniIpsecTunnelNextIfIndex.
Once created, the following objects may not be modified:
juniIpsecTunnelName
juniIpsecTunnelVirtualRouter
A corresponding entry in ifTable/ifXTable/juniIfTable is created/
destroyed as a result of creating/destroying an entry in this table.
Context
- MIB
- Juniper-IPsec-Tunnel-MIB
- OID
.1.3.6.1.4.1.4874.2.2.70.1.1.2.1.37- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniIpsecTunnelInterfaceEntry
- Table
- juniIpsecTunnelInterfaceTable
- Siblings
- 36
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniIpsecTunnelIfIndex The ifIndex of the IPsec tunnel interface. When creating entries in
this table, suitable values for this object are determined by reading
juniIpsecTunnelNextIfIndex. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.1 |
| juniIpsecTunnelSrcName The tunnel source Name. | column | OctetString | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.10 |
| juniIpsecTunnelDstType The tunnel destination type. The tunnel destination may be identified
by:
1. an IP(V4) address, or
2. a fully qualified domain name string, or
3. a user fully qualifi… | column | JuniIpsecIdentityType | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.11 |
| juniIpsecTunnelDstAddr The tunnel destination IP(V4) address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.12 |
| juniIpsecTunnelDstName The tunnel destination Name. | column | OctetString | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.13 |
| juniIpsecTunnelBackupDstType The tunnel backup destination type. The tunnel backup destination
type has to be the same as the tunnel destination type
The tunnel destination may be identified by:
1. … | column | JuniIpsecIdentityType | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.14 |
| juniIpsecTunnelBackupDstAddr The tunnel backup destination IP(V4) address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.15 |
| juniIpsecTunnelBackupDstName The tunnel backup destination Name. | column | OctetString | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.16 |
| juniIpsecTunnelLocalIdType The tunnel phase-2 local identity type. The tunnel local identity type
may be identified by:
1. an IP address, or
2. an IP address subnet, or
3. an IP address range. | column | JuniIpsecIdentityType | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.17 |
| juniIpsecTunnelLocalIdAddr1 The tunnel local phase-2 identity IP address 1. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.18 |
| juniIpsecTunnelLocalIdAddr2 The tunnel local phase-2 identity IP address 2 in the
case the identity type is an IP address range.
The tunnel local phase-2 identity netmask in the
case the identity type is an … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.19 |
| juniIpsecTunnelName The administratively assigned name for this IPsec Tunnel interface.
Before configuring other tunnel attributes, IPsec tunnel has to be
created with minimum attributes (tunnel name… | column | OctetString | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.2 |
| juniIpsecTunnelRemoteIdType The tunnel phase-2 remote identity type. The tunnel remote identity
type may be identified by:
1. an IP address, or
2. an IP address subnet, or
3. an IP address range. | column | JuniIpsecIdentityType | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.20 |
| juniIpsecTunnelRemoteIdAddr1 The tunnel remote phase-2 identity IP address 1. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.21 |
| juniIpsecTunnelRemoteIdAddr2 The tunnel remote phase-2 identity IP address 2 in the
case the identity type is an IP address range.
The tunnel remote phase-2 identity netmask in the
case the identity type is a… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.22 |
| juniIpsecTunnelLifeTimeSecs The tunnel lifetime in seconds. | column | seconds Unsigned32 | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.23 |
| juniIpsecTunnelLifeTimeKBs The tunnel lifetime in kilobytes. | column | kilobytes Unsigned32 | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.24 |
| juniIpsecTunnelPfsGroup The tunnel perfect forward secrecty group. | column | JuniIpsecPfsGroup | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.25 |
| juniIpsecTunnelMtu The tunnel MTU. | column | Unsigned32 | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.26 |
| juniIpsecTunnelInboundSpi1 The tunnel inbound SPI 1. | column | Spi | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.27 |
| juniIpsecTunnelInboundTransform1 The tunnel inbound transform 1. | column | JuniIpsecTransformType | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.28 |
| juniIpsecTunnelInboundSpi2 The tunnel inbound SPI 2. | column | Spi | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.29 |
| juniIpsecTunnelType The configured mode for this IPsec Tunnel interface. | column | JuniIpsecTunnelType | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.3 |
| juniIpsecTunnelInboundTransform2 The tunnel inbound transform 2. | column | JuniIpsecTransformType | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.30 |
| juniIpsecTunnelInboundSpi3 The tunnel inbound SPI 3. | column | Spi | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.31 |
| juniIpsecTunnelInboundTransform3 The tunnel inbound transform 3. | column | JuniIpsecTransformType | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.32 |
| juniIpsecTunnelInboundSpi4 The tunnel inbound SPI 4. | column | Spi | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.33 |
| juniIpsecTunnelInboundTransform4 The tunnel inbound transform 4. | column | JuniIpsecTransformType | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.34 |
| juniIpsecTunnelOutboundSpi The tunnel outbound SPI. | column | Spi | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.35 |
| juniIpsecTunnelOutboundTransform The tunnel outbound transform. | column | JuniIpsecTransformType | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.36 |
| juniIpsecTunnelTransportVirtualRouter The transport virtual router associated with this IPsec tunnel
interface. This object need not be set when creating row entries. Note
that the default when this object is not sp… | column | Juniper-TCJuniName | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.4 |
| juniIpsecTunnelLocalEndPt The tunnel local endpoint. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.5 |
| juniIpsecTunnelRemoteEndPt The tunnel remote endpoint. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.6 |
| juniIpsecTunnelTransformSet The transform set. It refers to a transform set that is defined in
the transform set table. | column | OctetString | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.7 |
| juniIpsecTunnelSrcType The tunnel source type. The tunnel source may be identified by:
1. an IP(V4) address, or
2. a fully qualified domain name string, or
3. a user fully qualified domain name string. | column | JuniIpsecIdentityType | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.8 |
| juniIpsecTunnelSrcAddr The tunnel source IP(V4) address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4874.2.2.70.1.1.2.1.9 |