juniAtm1483ProfileSubscriberName

Juniper-ATM-1483-Profile-MIB · .1.3.6.1.4.1.4874.2.2.58.1.1.4.1.4
Commands MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
If juniAtm1483ProfileSubscriberNamePrefix has the value 'enabled', the
value of this object serves as the prefix of a full subscriber name.
The full name is constructed by appending local geographic information
(slot, port, etc.) that uniquely distinguishes the subscriber.
              
This parameter is valid only when juniAtm1483ProfileSubscriberEncaps is
configured to one of the following values:
    ip(0),
    bridgedEthernet(19)
              
For all other values of juniAtm1483ProfileSubscriberEncaps it returns an
empty string.

Context

MIB
Juniper-ATM-1483-Profile-MIB
OID
.1.3.6.1.4.1.4874.2.2.58.1.1.4.1.4
Type
column
Access
readwrite
Status
current
Parent
juniAtm1483ProfileSubscriberEntry
Groups
6

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-ATM-1483-Profile-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-ATM-1483-Profile-MIB::juniAtm1483ProfileSubscriberName'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'Juniper-ATM-1483-Profile-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-ATM-1483-Profile-MIB::juniAtm1483ProfileSubscriberName.<juniAtm1483ProfileSubscriberId>.<juniAtm1483ProfileSubscriberEncaps>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'Juniper-ATM-1483-Profile-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'Juniper-ATM-1483-Profile-MIB::juniAtm1483ProfileSubscriberName'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255

Conformance

Member of
juniAtm1483ProfileGroup juniAtm1483ProfileGroup2 juniAtm1483ProfileGroup3 juniAtm1483ProfileGroup4 juniAtm1483ProfileGroup5 juniAtm1483ProfileGroup6