Juniper-ATM-1483-Profile-MIB Table View

This table contains profiles for configuring bulk ATM circuits.
          
Entries in this table are created/deleted as a side-effect of
corresponding operations to the juniProfileNameTable in the
Juniper-PROFILE-MIB.

juniAtm1483ProfileEntry row .1.3.6.1.4.1.4874.2.2.58.1.1.1.1

A profile describing VCC configuration of an ATM subinterface.

Indexes

juniAtm1483ProfileId

Column	Syntax	OID
juniAtm1483ProfileId The integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the juniProfileNameTable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.58.1.1.1.1.1
juniAtm1483ProfileSetMap A bitmap representing which objects in this entry have been explicitly configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for details of use. The INDEX object(s) and this object are excl…	Juniper-TCJuniSetMapr/w Type Constraints: range: 0..8	.1.3.6.1.4.1.4874.2.2.58.1.1.1.1.2
juniAtm1483ProfileVccType Specifies the encapsulation used by the circuit to carry IP datagrams. Encapsulations are as specified in RFC1483 Multiprotocol Interconnect over ATM. 'autoconfig' will recognize both VcMux and LLC formats.	Enumerationr/w Enumerated Values: 0 rfc1483VcMux 1 rfc1483Llc 2 autoconfig	.1.3.6.1.4.1.4874.2.2.58.1.1.1.1.3
juniAtm1483ProfileVccServiceCategory Service category for this circuit: ubr Unspecified Bit Rate (best effort). ubrPcr Unspecified Bit Rate with Peak Cell Rate limit. nrtVbr Non-realtime Variable Bit Rate. cbr Constant Bit Rate. r…	Enumerationr/w Enumerated Values: 0 ubr 1 ubrPcr 2 nrtVbr 3 cbr 4 rtVbr	.1.3.6.1.4.1.4874.2.2.58.1.1.1.1.4
juniAtm1483ProfileVccPcr Peak Cell Rate, in kilo-bits per second (kbps), of this circuit. This parameter is only required when juniAtm1483ProfileVccServiceCategory is configured to have one of the following values: ubrPcr …	kilo-bits per secondSNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.58.1.1.1.1.5
juniAtm1483ProfileVccScr Sustained Cell Rate, in kilo-bits per second (kbps), of this circuit. This parameter is only required when juniAtm1483ProfileVccServiceCategory is configured to have one of the following values: nrtVb…	kilo-bits per secondSNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.58.1.1.1.1.6
juniAtm1483ProfileVccMbs Maximum Burst Size, in cells, of this circuit. This parameter is only required when juniAtm1483ProfileVccServiceCategory is configured to have one of the following values: nrtVbr rtVbr	cellsSNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.58.1.1.1.1.7
juniAtm1483ProfileIfAlias This object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. This object initializes ifAlias for the interface. Note, all interfaces create…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.4874.2.2.58.1.1.1.1.8
juniAtm1483ProfileAdvisoryRxSpeed Advisory receive speed, in kilobits per second (kbps), of this subinterface. This object has no impact on forwarding performance but may be used as a hint for the underlying circuit receive speed. A value of 0 indicate…	kilo-bits per secondInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.4874.2.2.58.1.1.1.1.9
juniAtm1483ProfileVccOamAdminStatus The administrative state of OAM for the interface identified by this entry.	Enumerationr/w Enumerated Values: 1 oamAdminStateDisabled 2 oamAdminStateEnabled	.1.3.6.1.4.1.4874.2.2.58.1.1.1.1.10
juniAtm1483ProfileVccOamLoopbackFrequency The OAM loopback frequency for the interface identified by this entry.	secondsUnsigned32r/w Constraints: range: 0-600	.1.3.6.1.4.1.4874.2.2.58.1.1.1.1.11
juniAtm1483ProfileVcClassName The name of the ATM VC class assigned to this profile.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.4874.2.2.58.1.1.1.1.12

Configures recognition of incoming data encapsulation types that
trigger autoconfiguration on an interface.

juniAtm1483ProfileAutoConfEntry row .1.3.6.1.4.1.4874.2.2.58.1.1.2.1

Configures recognition of an incoming data encapsulation type that
triggers autoconfiguration on an interface.

Indexes

juniAtm1483ProfileAutoConfId juniAtm1483ProfileAutoConfEncaps

Column	Syntax	OID
juniAtm1483ProfileAutoConfId The integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the juniProfileNameTable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.58.1.1.2.1.1
juniAtm1483ProfileAutoConfEncaps The encapsulating protocol type to which the autconfiguration information in this entry applies. The valid values are: ip(0), ppp(1), pppoe(17), bridgedEthernet(19)	Juniper-PROFILE-MIBJuniProfileIfEncaps Type Values: 0 ip 1 ppp 11 atm1483 17 pppoe 19 bridgedEthernet 127 any	.1.3.6.1.4.1.4874.2.2.58.1.1.2.1.2
juniAtm1483ProfileAutoConfEnable When enabled, permits autoconfiguration of the specified interface when the specified encapsulation is recognized in an incoming data frame. This parameter can only be set when juniAtm1483ProfileAutoConfE…	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.58.1.1.2.1.3
juniAtm1483ProfileAutoConfLockoutMin The lower bound, in seconds, of the time range used to specify the duration of the lockout of the encapsulation type from recognition for the specified interface. This only takes effect if juniAtm1483ProfileAutoConfE…	Integer32r/w Constraints: range: 0-86400	.1.3.6.1.4.1.4874.2.2.58.1.1.2.1.4
juniAtm1483ProfileAutoConfLockoutMax The upper bound, in seconds, of the time range used to specify the duration of the lockout of the encapsulation type from recognition for the specified interface. This value must equal or exceed the value for juniAtm…	Integer32r/w Constraints: range: 0-86400	.1.3.6.1.4.1.4874.2.2.58.1.1.2.1.5

Specifies nested profiles for incoming data encapsulation types.
          
Entries in this table are created/deleted as a side-effect of
corresponding operations to the juniProfileNameTable in the
Juniper-PROFILE-MIB.

juniAtm1483ProfileNestedProfileEntry row .1.3.6.1.4.1.4874.2.2.58.1.1.3.1

Specifies nested profile for incoming data encapsulation type.

Indexes

juniAtm1483ProfileNestedProfileId juniAtm1483ProfileNestedProfileEncaps

Column	Syntax	OID
juniAtm1483ProfileNestedProfileId The integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the juniProfileNameTable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.58.1.1.3.1.1
juniAtm1483ProfileNestedProfileEncaps The encapsulating protocol type to which the nested profile specified in this entry applies. The valid values are: ip(0), ppp(1), pppoe(17), bridgedEthernet(19)	Juniper-PROFILE-MIBJuniProfileIfEncaps Type Values: 0 ip 1 ppp 11 atm1483 17 pppoe 19 bridgedEthernet 127 any	.1.3.6.1.4.1.4874.2.2.58.1.1.3.1.2
juniAtm1483ProfileNestedProfileUpperIfProfileName The name of profile used for the protocol type specified by juniAtm1483ProfileNestedProfileEncaps.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4874.2.2.58.1.1.3.1.3

Configures subscriber identity used in circumstances where the remote
subscriber's identity cannot be queried directly (e.g. dynamic IPoA
operation).
          
Entries in this table are created/deleted as a side-effect of
corresponding operations to the juniProfileNameTable in the
Juniper-PROFILE-MIB.

juniAtm1483ProfileSubscriberEntry row .1.3.6.1.4.1.4874.2.2.58.1.1.4.1

Configures subscriber identity used in circumstances where the remote
subscriber's identity cannot be queried directly (e.g. dynamic IPoA
operation).

Indexes

juniAtm1483ProfileSubscriberId juniAtm1483ProfileSubscriberEncaps

Column	Syntax	OID
juniAtm1483ProfileSubscriberId The integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the juniProfileNameTable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.58.1.1.4.1.1
juniAtm1483ProfileSubscriberEncaps The encapsulating protocol type to which the subscriber information in this entry applies. The valid values are: ip(0), bridgedEthernet(19)	Juniper-PROFILE-MIBJuniProfileIfEncaps Type Values: 0 ip 1 ppp 11 atm1483 17 pppoe 19 bridgedEthernet 127 any	.1.3.6.1.4.1.4874.2.2.58.1.1.4.1.2
juniAtm1483ProfileSubscriberNamePrefix If enabled, indicates whether the value of juniSubscriberName is a prefix rather than a full name. This parameter is valid only when juniAtm1483ProfileSubscriberEncaps is configured to one of the followin…	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.58.1.1.4.1.3
juniAtm1483ProfileSubscriberName If juniAtm1483ProfileSubscriberNamePrefix has the value 'enabled', the value of this object serves as the prefix of a full subscriber name. The full name is constructed by appending local geographic information (slot, p…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4874.2.2.58.1.1.4.1.4
juniAtm1483ProfileSubscriberPasswordPrefix If enabled, indicates whether the value of juniAtm1483ProfileSubscriberPassword is a prefix rather than a full password. This parameter is valid only when juniAtm1483ProfileSubscriberEncaps is configured …	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.58.1.1.4.1.5
juniAtm1483ProfileSubscriberPassword The subscriber's password. If juniAtm1483ProfileSubscriberPasswordPrefix has the value 'enabled', the value of this object serves as the prefix of a full subscriber password. The full password is constru…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4874.2.2.58.1.1.4.1.6
juniAtm1483ProfileSubscriberDomain The subscriber's domain. This parameter is valid only when juniAtm1483ProfileSubscriberEncaps is configured to one of the following values: ip(0), bridgedEthernet(19) For all other …	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4874.2.2.58.1.1.4.1.7