juniAaaSubscriberInterfaceId
Juniper-AAA-MIB ·
.1.3.6.1.4.1.4874.2.2.20.1.8.4.1.9
Object
column SNMPv2-TCDisplayString
A text string describing the local interface associated with this
subscriber. Types/formats/examples for this string include:
ERX: <portLocation> == <slot>/<port>;
E320: <portLocation> == <slot>/<adapter>/<port>;
ATM Virtual Circuit
atm <portLocation>:<vpi>.<vci>
'atm 3/2:0.100' (ERX)
'atm 3/0/2:0.100' (E320)
Ethernet
{ fastEthernet | gigabitEthernet } <portLocation>
'fastEthernet 3/2' (ERX)
'gigabitEthernet 3/2' (ERX)
'gigabitEthernet 3/0/2' (E320)
'tenGigabitEthernet 3/0/2' (E320)
Ethernet VLAN
{ fastEthernet | gigabitEthernet } <portLocation>:<vlanID>
'fastEthernet 3/2:1000' (ERX)
'gigabitEthernet 3/2:1000' (ERX)
'gigabitEthernet 3/0/2:1000' (E320)
'tenGigabitEthernet 3/0/2:1000' (E320)
Channelized Serial
serial <portLocation>:<channelSpecifier>[/<channelSpecifier>]*
'serial 3/2:4' (ERX T1/E1)
'serial 3/2:2/4' (ERX T3/E3)
'serial 3/2:2/1/1/4' (ERX OC3/OC12 - channelized DS3)
'serial 3/2:2/1/1/1/4' (ERX OC3/OC12 - virtual tributaries)
'serial 3/0/2:2/1/1/4' (E320 OC3/OC12 - channelized DS3)
'serial 3/0/2:2/1/1/1/4' (E320 OC3/OC12 - virtual tributaries)
L2TP over IP
ip:<localIpAddr>:<peerIpAddr>:<localTunnelID>:<peerTunnelID>:
<localSessionID>:<peerSessionID>:<callSerialNumber>
'ip:10.10.0.1:20.20.0.2:1234:5678:9abc:def0:6789abcd'
(Note: tunnelIDs, sessionIDs, and callSerialNumber are in
hexadecimal.)
Other formats may be supported over time.
Context
- MIB
- Juniper-AAA-MIB
- OID
.1.3.6.1.4.1.4874.2.2.20.1.8.4.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- juniAaaSubscriberEntry
- Groups
- 5
Net-SNMP examples
How SNMP and these commands workWalk the column to discover its indexed instances, or supply every index to read one instance.
Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaSubscriberInterfaceId'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaSubscriberInterfaceId.<juniAaaSubscriberHandle>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'Juniper-AAA-MIB::juniAaaSubscriberInterfaceId'
Syntax
- Source
- SNMPv2-TCDisplayString
- Base type
OctetString- Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as
US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special
meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the
same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is
illegal. (Note that this also means that a string may
end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255
characters in length.
Values & Constraints
Type Constraints
range: 0..255