Juniper-AAA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
25
Rows
25
Columns
145
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1 · 1 row entry · 21 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaAssignDomainTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaAssignDomainTable'
The entries in this table specify the assignment of a remote access
user to a virtual router, based on the user's domain.
juniAaaAssignDomainEntry row .1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1
A specification of the virtual router to which users on a specified
domain should be assigned.
Column Syntax OID
juniAaaAssignDomainNameThe domain name uniquely identifying this entry.JuniAaaDomainName
Type Constraints:
range: 1..63
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.1
juniAaaAssignDomainRowStatusControls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.2
This variable is replaced by juniAaaAssignDomainAuthRouterName and
juniAaaAssignDomainIpRouterName. It returns same value as
juniAaaAssignDomainAuthRouterName.
Juniper-TCJuniName
Type Constraints:
range: 0..256
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.3
The number of the loopback interface, associated with the specified
virtual router, whose IP address is used as the source address when
transmitting IP packets on unnumbered remote access user links.

For …
Integer32r/w
Constraints:
range: -1-32000
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.4
juniAaaAssignDomainIpHintEnables/disables the IP hint feature, which causes the system to
allocate an IP address before going to RADIUS for authentication.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.5
juniAaaAssignDomainAtmServiceLevelThe Service category for this circuit:
ubr Unspecified bit rate (best effort).
ubrPcr Unspecified Bit Rate with Peak Cell Rate limit.
nrtVbr Non-realtime Variable Bit Rate.
cbr Constant bit rat…
Enumerationr/w
Enumerated Values:
0none
1ubr
2ubrPcr
3nrtVbr
4cbr
5rtVbr
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.6
juniAaaAssignDomainAtmPcrPeak Cell Rate, in kilobits per second (kbps), of this circuit.

This parameter is only required when juniAaaAssignDomainAtmServiceLevel
is configured to have one of the following values:
ubrPcr
nr…
kbpsUnsigned32r/w
Constraints:
range: 0-4294967294
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.7
juniAaaAssignDomainAtmScrSustained Cell Rate, in kilobits per second (kbps), of this circuit.

This parameter is only required when juniAaaAssignDomainAtmServiceLevel
is configured to have one of the following values:
nrtVbr
kbpsUnsigned32r/w
Constraints:
range: 0-4294967294
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.8
juniAaaAssignDomainAtmMbsMaximum Burst Size, in cells, of this circuit.

This parameter is only required when juniAaaAssugbDomainAtmServiceLevel
is configured to have one of the following values:
nrtVbr
cellsUnsigned32r/w
Constraints:
range: 0-4294967294
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.9
juniAaaAssignDomainOverrideUserNameThe override user name associated with this entry. This object is used
to override the user name of the remote client.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.10
juniAaaAssignDomainOverridePasswordThe override password for the user name defined by
juniAaaAssignDomainOverrideUserName. This object is used to override
the password part of the username/password pair of the remote client.
This value returns a string …
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.11
juniAaaAssignDomainStripDomainEnables/disables the domain name stripping feature, which causes the
system to strip the domain name before sending the access-request to
RADIUS for authentication.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.12
juniAaaAssignDomainPoolNameThe name of the local address pool from which to allocate an IP address
for the subscriber when none is returned from the authentication
server.
OctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.13
juniAaaAssignDomainLocalInterfaceThe local interface, associated with the specified virtual router,
whose IP address is used as the source address when transmitting
IP packets on remote access user links.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.14
juniAaaAssignDomainIpv6RouterNameThe name of the virtual router to which remote access users within this
domain are assigned for IPv6 interfaces.
Juniper-TCJuniNamer/w
Type Constraints:
range: 0..256
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.15
juniAaaAssignDomainIpv6LocalInterfaceThe local interface, associated with the specified virtual router,
whose IPv6 address is used as the source address when transmitting IPv6
packets on remote access user links.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.16
juniAaaAssignDomainTunnelGroupThe tunnel group assigned to this domain map. Non default
configuration of this object cannot coexist with matching tunnel
entries in juniAaaAssignDomainTunnelTable.
JuniAaaTunnelGroupNamer/w
Type Constraints:
range: 1..63
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.17
juniAaaAssignDomainAuthRouterNameThe name of the virtual router where remote access users within this
domain will be authenticated.
Juniper-TCJuniNamer/w
Type Constraints:
range: 0..256
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.18
juniAaaAssignDomainIpRouterNameThe name of the virtual router to which remote access users within this
domain are assigned for IP interfaces.
Juniper-TCJuniNamer/w
Type Constraints:
range: 0..256
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.19
juniAaaAssignDomainTunnelSubscriberAuthenticationWhen there are tunnel configurations under this domain, enable or
disable subscribers of this domain authenticate with configured
authentication server.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.20
juniAaaAssignDomainBackupPoolNameThe name of the backup local address pool from which to allocate an IP address
for the subscriber when the primary address pool is 100% allocated
OctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.4874.2.2.20.1.1.2.1.1.21
.1.3.6.1.4.1.4874.2.2.20.1.1.2.2 · 1 row entry · 17 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaAssignDomainTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaAssignDomainTunnelTable'
The entries in this table specify the tunnels associated with a
domain.
juniAaaAssignDomainTunnelEntry row .1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1
A specification of the tunnels associated with a domain.
Column Syntax OID
juniAaaAssignDomainTunnelNameThe domain name associated with this entry.JuniAaaDomainName
Type Constraints:
range: 1..63
.1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.1
juniAaaAssignDomainTunnelTagThe tunnel tag value associated with this entry.Integer32
Constraints:
range: 1-31
.1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.2
juniAaaAssignDomainTunnelPreferenceThe tunnel's preference value associated with this entry. The value 0
is the highest preference.
Integer32r/w
Constraints:
range: 0-2000
.1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.3
juniAaaAssignDomainTunnelTypeThe tunnel type associated with this entry. Attempts to set this
object to tunnelUnknown(2) and tunnelL2f(3) will fail (wrongValue).
Enumerationr/w
Enumerated Values:
1tunnelL2tp
2tunnelUnknown
3tunnelL2f
.1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.4
juniAaaAssignDomainTunnelMediumThe tunnel medium associated with this entry. The medium dictates the
format of the tunnel address. Attempts to set this object to
tunnelMediumUnknown(2) will fail (wrongValue).
Enumerationr/w
Enumerated Values:
1tunnelMediumIPv4
2tunnelMediumUnknown
.1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.5
juniAaaAssignDomainTunnelAddressThe tunnel server address associated with this entry. The
juniAaaAssignDomainTunnelMedium object defines the format of the
address.

MEDIUM EXAMPLE FORMAT
tunnelMedium_IPv4 xyz.xy…
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.6
juniAaaAssignDomainTunnelPasswordThe tunnel password associated with this entry. The object returns a
null length string on reads due to security concerns.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.7
juniAaaAssignDomainTunnelIdThe tunnel identifier associated with this entry. The tunnel
identifier is used to distinguish between multiple tunnels to the same
juniAaaAssignDomainTunnelAddress.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.8
juniAaaAssignDomainTunnelHostNameThe tunnel client hostname associated with this entry. This object is
analogous to the RADIUS attribute Tunnel-Client-Auth-ID. When a tunnel
is established with a peer, this object can be used to distinguish
groups of…
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.9
juniAaaAssignDomainTunnelRowStatusControls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.10
juniAaaAssignDomainTunnelServerNameThe tunnel server hostname associated with this entry. This object is
analogous to the RADIUS attribute Tunnel-Server-Auth-ID. When a tunnel
is established with a peer, this object can be used to distinguish
groups of…
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.11
juniAaaAssignDomainTunnelClientAddressThe tunnel client address associated with this entry. The
juniAaaAssignDomainTunnelMedium object defines the format of the
address.

MEDIUM EXAMPLE FORMAT
tunnelMedium_IPv4 xyz.xy…
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.12
juniAaaAssignDomainTunnelMaxSessionsThe tunnel's max-session value associated with this entry. The value 0
indicates no maximum session value.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.13
juniAaaAssignDomainTunnelReceiveWindowSizeFor an L2TP tunnel this object represents the receive window
size. A value of 0 indicates that this object has no effect
on the tunnel's receive window size.
Integer32r/w
Constraints:
range: 0-0
range: 4-4
.1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.14
juniAaaAssignDomainTunnelFailoverResyncFor an L2TP tunnel this object represents the failover resync
mechanism:
disable(0) - Disable failover resync
failoverProtocol(1) - Use the L2TP Failover Protocol
silentFailover(2) - Use the JUNOSe Silent Failover Mech…
Enumerationr/w
Enumerated Values:
0disable
1failoverProtocol
2silentFailover
3failoverProtocolFallbackToSilentFailover
4notConfigured
.1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.15
juniAaaAssignDomainTunnelSwitchProfileThe name of the L2TP tunnel switch profile to apply in tunnel
switching scenarios.
JuniAaaTunnelSwitchProfileNamer/w
Type Constraints:
range: 0..64
.1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.16
juniAaaAssignDomainTunnelTxConnectSpeedMethodFor an L2TP tunnel this object represents the tx connect speed method
mechanism at the LAC:
notSet(0) - this parameter has not been configured
staticLayer2(1) - use static layer 2 settings
dynamicLayer2(2) - use…
Enumerationr/w
Enumerated Values:
0notSet
1staticLayer2
2dynamicLayer2
3qos
4actual
.1.3.6.1.4.1.4874.2.2.20.1.1.2.2.1.17
.1.3.6.1.4.1.4874.2.2.20.1.1.2.3 · 1 row entry · 4 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaAssignDomainPadnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaAssignDomainPadnTable'
The entries in this table specify the PPPoE active discovery network
(PADN) parameters associated with a domain.
juniAaaAssignDomainPadnEntry row .1.3.6.1.4.1.4874.2.2.20.1.1.2.3.1
A specification of the PPPoE active discovery network parameters
associated with a domain.
Column Syntax OID
juniAaaAssignDomainPadnIpAddressThe IP address of this entry.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.4874.2.2.20.1.1.2.3.1.1
juniAaaAssignDomainPadnIpMaskThe IP mask of this entry.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.4874.2.2.20.1.1.2.3.1.2
juniAaaAssignDomainPadnRowStatusControls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4874.2.2.20.1.1.2.3.1.3
juniAaaAssignDomainPadnDistanceThe administrative distance metric of this entry.Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.4874.2.2.20.1.1.2.3.1.4
.1.3.6.1.4.1.4874.2.2.20.1.2.1.2 · 1 row entry · 2 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaAuthMethodsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaAuthMethodsTable'
The entries in this table specify the assignment of authentication methods
for a particular subscriber type.
juniAaaAuthMethodsEntry row .1.3.6.1.4.1.4874.2.2.20.1.2.1.2.1
A specification of the authentication methods for a particular
subscriber type.
Column Syntax OID
juniAaaAuthMethodsSubscriberTypeThe subscriber type.JuniAaaAuthenticationSubscriberTypes
Type Values:
1ppp
2atm1483
3ip
4tunnel
5radiusRelay
6ipsec
.1.3.6.1.4.1.4874.2.2.20.1.2.1.2.1.1
juniAaaAuthMethodsAuthenticationThe set of authentication protocols configured on this system. Each
octet in this object contains one of the values defined in the
JuniAaaAuthenticationMethods TEXTUAL-CONVENTION.

The system will sequenc…
OctetStringr/w
Constraints:
range: 0-5
.1.3.6.1.4.1.4874.2.2.20.1.2.1.2.1.2
.1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1 · 1 row entry · 7 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaLocalAuthUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaLocalAuthUserTable'
This table contains entries for users present in the
local user databases.
juniAaaLocalAuthUserEntry row .1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1
Each entry in this table represents a single user in a local
user database.
Column Syntax OID
juniAaaLocalAuthUserNameThe name of the user.OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.1
juniAaaLocalAuthUserRowStatusControls creation/deletion of entries in this table. Only
'createAndGo' and 'destroy' enumeration values are supported.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.2
juniAaaLocalAuthUserPasswordThe password for this user. If the juniAaaLocalAuthUserEncrypted
object is not set with this object, the password value is assumed
to be unencrypted. When set, any existing password is overwritten.
Setting a zero leng…
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.3
juniAaaLocalAuthUserEncryptionThe encryption type of the password value being set with the
juniAaaLocalAuthUserPassword object. Reading this object always
results in a value of encryptionNone.

encyptionNone - The password is unen…
Enumerationr/w
Enumerated Values:
0encryptionNone
5encryptionSecret
8encryptionPassword
.1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.4
juniAaaLocalAuthUserIpAddressThe IP address this user is to be assigned, once authenticated.
This object corresponds to the Framed-IP-Address attribute in RADIUS
authentication servers.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.5
juniAaaLocalAuthUserIpAddressPoolThe name of the local address pool this user is to be allocated an
IP address from, once authenticated. This object corresponds to the
Framed-Pool attribute in RADIUS authentication servers.
OctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.6
juniAaaLocalAuthUserRouterNameThe name of the router this user is to be assigned to, once
authenticated. This object corresponds to the Unispher-Virtual-Router
attribute in RADIUS authentication servers.
Juniper-TCJuniNamer/w
Type Constraints:
range: 0..256
.1.3.6.1.4.1.4874.2.2.20.1.2.2.1.1.1.7
.1.3.6.1.4.1.4874.2.2.20.1.2.2.2.1 · 1 row entry · 2 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaLocalAuthUserDbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaLocalAuthUserDbTable'
This table contains entries for local user databases.
juniAaaLocalAuthUserDbEntry row .1.3.6.1.4.1.4874.2.2.20.1.2.2.2.1.1
Each entry in this table represents a single local user database.
Column Syntax OID
juniAaaLocalAuthUserDbNameThe name of this local user database.OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.4874.2.2.20.1.2.2.2.1.1.1
juniAaaLocalAuthUserDbRowStatusControls creation/deletion of entries in this table. Only
'createAndGo' and 'destroy' enumeration values are supported.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4874.2.2.20.1.2.2.2.1.1.2
.1.3.6.1.4.1.4874.2.2.20.1.2.2.3.1 · 1 row entry · 2 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaLocalAuthUserDbAssocTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaLocalAuthUserDbAssocTable'
This table contains entries that identify the local user
database that is associated with each virtual router.
juniAaaLocalAuthUserDbAssocEntry row .1.3.6.1.4.1.4874.2.2.20.1.2.2.3.1.1
Each entry in this table represents a single association
between a virtual router and local user database. The same
database can be referenced by multiple virtual routers; however,
a virtual router can reference only o…
Column Syntax OID
juniAaaLocalAuthUserDbAssocRowStatusControls creation/deletion of entries in this table. Only
'createAndGo' and 'destroy' enumeration values are supported.

When a virtual router is deleted, its corresponding entries
in this table will be d…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4874.2.2.20.1.2.2.3.1.1.1
juniAaaLocalAuthUserDbAssocDbNameThe name of local user database associated with this virtual
router. Setting the name to the default local user database,
'default', will delete this entry, as this is the default
association for all virtual routers.
OctetStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.4874.2.2.20.1.2.2.3.1.1.2
.1.3.6.1.4.1.4874.2.2.20.1.3.1.7 · 1 row entry · 2 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaAcctMethodsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaAcctMethodsTable'
The entries in this table specify the assignment of accounting methods
for a particular subscriber type.
juniAaaAcctMethodsEntry row .1.3.6.1.4.1.4874.2.2.20.1.3.1.7.1
A specification of the accounting methods for a particular
subscriber type.
Column Syntax OID
juniAaaAcctMethodsSubscriberTypeThe subscriber type.JuniAaaAccountingSubscriberTypes
Type Values:
1ppp
2atm1483
3ip
4tunnel
5radiusRelay
6ipsec
.1.3.6.1.4.1.4874.2.2.20.1.3.1.7.1.1
juniAaaAcctMethodsAccountingThe set of accounting protocols configured on this system. Each octet
in this object contains one of the values defined in the
JuniAaaAccountingMethods TEXTUAL CONVENTION.

The system will sequence throug…
OctetStringr/w
Constraints:
range: 0-5
.1.3.6.1.4.1.4874.2.2.20.1.3.1.7.1.2
.1.3.6.1.4.1.4874.2.2.20.1.3.2.1 · 1 row entry · 6 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaAcctBcastServerGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaAcctBcastServerGroupTable'
The entries in this table specify broadcast accounting routers
of the named group. 
          
In addition to row status operations if juniAaaAcctBrasServerGroupRouter1,
juniAaaAcctBrasServerGroupRouter2, juniAaaAcctBrasServerGroupRouter3 and
juniAaaAcctBrasServerGroupRouter4 are all set zero length strings,
the entry will be deleted.
          
At least one non zero length string router is required to
successfully create and entry. All non zero length string
routers have to be unique within the group.
juniAaaAcctBcastServerGroupEntry row .1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1
A specification of the accounting servers for a particular
group.
Column Syntax OID
juniAaaAcctBcastServerGroupThe group name.Juniper-TCJuniVrfGroupName
Type Constraints:
range: 0..32
.1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1.1
juniAaaAcctBcastServerGroupRouter1The name of the first router in the group.Juniper-TCJuniNamer/w
Type Constraints:
range: 0..256
.1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1.2
juniAaaAcctBcastServerGroupRouter2The name of the second router in the group.Juniper-TCJuniNamer/w
Type Constraints:
range: 0..256
.1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1.3
juniAaaAcctBcastServerGroupRouter3The name of the third router in the group.Juniper-TCJuniNamer/w
Type Constraints:
range: 0..256
.1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1.4
juniAaaAcctBcastServerGroupRouter4The name of the third router in the group.Juniper-TCJuniNamer/w
Type Constraints:
range: 0..256
.1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1.5
juniAaaAcctBcastServerGroupRowStatusControls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET.
In addition to row status operations if
juniAaaAcctBrasServerGroupRouter1, juniAaaAcctBrasServerGroupRouter2,…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4874.2.2.20.1.3.2.1.1.6
.1.3.6.1.4.1.4874.2.2.20.1.7.2.1 · 1 row entry · 2 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaTunnelGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaTunnelGroupTable'
The entries in this table specify tunnel attributes sufficient tunnel establishment.
juniAaaTunnelGroupEntry row .1.3.6.1.4.1.4874.2.2.20.1.7.2.1.1
An entry in the tunnel group table.
Column Syntax OID
juniAaaTunnelGroupNameThe tunnel group name uniquely identifying this entry.JuniAaaTunnelGroupName
Type Constraints:
range: 1..63
.1.3.6.1.4.1.4874.2.2.20.1.7.2.1.1.1
juniAaaTunnelGroupRowStatusControls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4874.2.2.20.1.7.2.1.1.2
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2 · 1 row entry · 18 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaTunnelGroupTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaTunnelGroupTunnelTable'
The entries in this table specify the tunnels associated with a
tunnel group.
juniAaaTunnelGroupTunnelEntry row .1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1
A specification of the tunnels associated with a tunnel group.
Column Syntax OID
juniAaaTunnelGroupTunnelNameThe tunnel group name associated with this entry.JuniAaaTunnelGroupName
Type Constraints:
range: 1..63
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.1
juniAaaTunnelGroupTunnelTagThe tunnel tag value associated with this entry.Integer32
Constraints:
range: 1-31
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.2
juniAaaTunnelGroupTunnelPreferenceThe tunnel's preference value associated with this entry. The value 0
is the highest preference.
Integer32r/w
Constraints:
range: 0-2000
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.3
juniAaaTunnelGroupTunnelTypeThe tunnel type associated with this entry.Enumerationr/w
Enumerated Values:
1tunnelL2tp
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.4
juniAaaTunnelGroupTunnelMediumThe tunnel medium associated with this entry. The medium dictates the
format of the tunnel address. Attempts to set this object to
tunnelMediumUnknown(2) will fail (wrongValue).
Enumerationr/w
Enumerated Values:
1tunnelMediumIPv4
2tunnelMediumUnknown
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.5
juniAaaTunnelGroupTunnelAddressThe tunnel server address associated with this entry. The
juniAaaTunnelGroupTunnelMedium object defines the format of the
address.

MEDIUM EXAMPLE FORMAT
tunnelMedium_IPv4 xyz.xyz…
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.6
juniAaaTunnelGroupTunnelPasswordThe tunnel password associated with this entry. The object returns a
null length string on reads due to security concerns.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.7
juniAaaTunnelGroupTunnelIdThe tunnel identifier associated with this entry. The tunnel
identifier is used to distinguish between multiple tunnels to the same
juniAaaTunnelGroupTunnelAddress.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.8
juniAaaTunnelGroupTunnelHostNameThe tunnel client hostname associated with this entry. This object is
analogous to the RADIUS attribute Tunnel-Client-Auth-ID. When a tunnel
is established with a peer, this object can be used to distinguish
groups of…
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.9
juniAaaTunnelGroupTunnelRowStatusControls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.10
juniAaaTunnelGroupTunnelServerNameThe tunnel server hostname associated with this entry. This object is
analogous to the RADIUS attribute Tunnel-Server-Auth-ID. When a tunnel
is established with a peer, this object can be used to distinguish
groups of…
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.11
juniAaaTunnelGroupTunnelClientAddressThe tunnel client address associated with this entry. The
juniAaaTunnelGroupTunnelMedium object defines the format of the
address.

MEDIUM EXAMPLE FORMAT
tunnelMedium_IPv4 xyz.xyz…
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.12
juniAaaTunnelGroupTunnelMaxSessionsThe tunnel's max-session value associated with this entry. The value 0
indicates no maximum session value.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.13
juniAaaTunnelGroupTunnelReceiveWindowSizeFor an L2TP tunnel this object represents the receive window
size. A value of 0 indicates that this object has no effect
on the tunnel's receive window size.
Integer32r/w
Constraints:
range: 0-0
range: 4-4
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.14
juniAaaTunnelGroupTunnelRouterNameThe name of the virtual router to which remote access users within this
tunnel are assigned.
Juniper-TCJuniNamer/w
Type Constraints:
range: 0..256
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.15
juniAaaTunnelGroupTunnelFailoverResyncFor an L2TP tunnel this object represents the failover resync
mechanism:
disable(0) - Disable failover resync
failoverProtocol(1) - Use the L2TP Failover Protocol
silentFailover(2) - Use the JUNOSe Silent Failover Mech…
Enumerationr/w
Enumerated Values:
0disable
1failoverProtocol
2silentFailover
3failoverProtocolFallbackToSilentFailover
4notConfigured
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.16
juniAaaTunnelGroupTunnelSwitchProfileThe name of the L2TP tunnel switch profile to apply in tunnel
switching scenarios.
JuniAaaTunnelSwitchProfileNamer/w
Type Constraints:
range: 0..64
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.17
juniAaaTunnelGroupTunnelTxConnectSpeedMethodFor an L2TP tunnel this object represents the tx connect speed method
mechanism at the LAC:
notSet(0) - this parameter has not been configured
staticLayer2(1) - use static layer 2 settings
dynamicLayer2(2) - use…
Enumerationr/w
Enumerated Values:
0notSet
1staticLayer2
2dynamicLayer2
3qos
4actual
.1.3.6.1.4.1.4874.2.2.20.1.7.2.2.1.18
.1.3.6.1.4.1.4874.2.2.20.1.8.4 · 1 row entry · 17 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaSubscriberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaSubscriberTable'
The entries in this table represent subscribers by subscriber handle
value.
juniAaaSubscriberEntry row .1.3.6.1.4.1.4874.2.2.20.1.8.4.1
A specification of subscribers by subscriber handle.
Column Syntax OID
juniAaaSubscriberHandleThe subscriber handle associated with this subscriber. A subscriber
handle is a monotomically increasing integer.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.4.1.1
juniAaaSubscriberUserNameThe RADIUS userName associated with this subscriber.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4874.2.2.20.1.8.4.1.2
juniAaaSubscriberRouterNameThe virtual router assigned to this subscriber.Juniper-TCJuniName
Type Constraints:
range: 0..256
.1.3.6.1.4.1.4874.2.2.20.1.8.4.1.3
juniAaaSubscriberRouterIndexThe router index that identifies the virtual router associated with
this subscriber. The value of this object can be used to index the
router in the juniRouterTable.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.4.1.4
juniAaaSubscriberLoginTimeThe time this subscriber logged in to RADIUS server.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4874.2.2.20.1.8.4.1.5
juniAaaSubscriberIpAddressThe client IP Address assigned to this subscriber.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.4874.2.2.20.1.8.4.1.6
juniAaaSubscriberIpAddressMaskThe client IP Address Mask assigned to this subscriber.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.4874.2.2.20.1.8.4.1.7
juniAaaSubscriberAddrAssignTypeThe address assignment type for this subscriber.JuniAddressAssignType
Type Values:
0none
1radius
2localPool
3dhcp
4user
5application
6localAuthenticationServer
7notSet
.1.3.6.1.4.1.4874.2.2.20.1.8.4.1.8
juniAaaSubscriberInterfaceIdA text string describing the local interface associated with this
subscriber. Types/formats/examples for this string include:

ERX: <portLocation> == <slot>/<port>;
E320: <portLocation> == <slot>/<adapte…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4874.2.2.20.1.8.4.1.9
juniAaaSubscriberStateThe state of this subscriber.JuniSubscriberState
Type Values:
0pending
1established
2deleting
3tunneling
4tunnelAcct
5terminated
6counted
7clientHandleSet
8sentAcctStart
.1.3.6.1.4.1.4874.2.2.20.1.8.4.1.10
juniAaaSubscriberClientTypeThe client type for this subscriber. Certain client types (e.g.,
'other') might be suppressed from representation in this table.
JuniSubscriberClientType
Type Values:
0ppp
1login
2ip
3config
4tunnel
5other
.1.3.6.1.4.1.4874.2.2.20.1.8.4.1.11
juniAaaSubscriberIngressPolicyNameThe Ingress Policy Name associated with this subscriber.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4874.2.2.20.1.8.4.1.12
juniAaaSubscriberEgressPolicyNameThe Egress Policy Name associated with this subscriber.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4874.2.2.20.1.8.4.1.13
juniAaaSubscriberQosProfileNameThe QoS Profile Name associated with this subscriber.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4874.2.2.20.1.8.4.1.14
juniAaaSubscriberRowStatusControls the deletion of the subscriber from this table. Deletion of
the subscriber is analogous to logging the subscriber out of the
network.

Note: only 'destroy' is supported for SNMP SET operations.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4874.2.2.20.1.8.4.1.15
juniAaaSubscriberIpv6RouterIndexThe router index that identifies the virtual router associated with
this subscriber's IPv6 interface. The value of this object can be used
to index the router in the juniRouterTable.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.4.1.16
juniAaaSubscriberIpv6AddrIfIdentifierThe client IPv6 Address Interface Identifier assigned to this
subscriber.
IPV6-TCIpv6AddressIfIdentifier
Type Constraints:
range: 0..8
.1.3.6.1.4.1.4874.2.2.20.1.8.4.1.17
.1.3.6.1.4.1.4874.2.2.20.1.8.5 · 1 row entry · 2 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaSubscriberRouterSummaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaSubscriberRouterSummaryTable'
The entries in this table report number of subscribers per router.
juniAaaSubscriberRouterSummaryEntry row .1.3.6.1.4.1.4874.2.2.20.1.8.5.1
A specification of subscribers for a router.
Column Syntax OID
juniAaaSubscriberRouterSummaryRouterIndexThe router index of the virtual router. The value of this object can
be used to retrieve additional information in the router mib.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.5.1.1
juniAaaSubscriberRouterSummaryCountThe number of subscribers on this router.SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.5.1.2
.1.3.6.1.4.1.4874.2.2.20.1.8.6 · 1 row entry · 3 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaSubscriberRouterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaSubscriberRouterTable'
The entries in this table sort subscribers by router ID.
juniAaaSubscriberRouterEntry row .1.3.6.1.4.1.4874.2.2.20.1.8.6.1
A specification of subscribers by router ID.
Column Syntax OID
juniAaaSubscriberRouterRouterIndexThe router index of the virtual router. The value of this object can
be used to retrieve additional information in the router MIB.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.6.1.1
juniAaaSubscriberRouterHandleThe subscriber handle associated with this subscriber. A subscriber
handle is a monotonically increasing integer.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.6.1.2
juniAaaSubscriberRouterRowStatusAlways has value 'active'.SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4874.2.2.20.1.8.6.1.3
.1.3.6.1.4.1.4874.2.2.20.1.8.8 · 1 row entry · 2 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaSubscriberLocationSummaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaSubscriberLocationSummaryTable'
The entries in this table report number of subscribers per interface
location.
juniAaaSubscriberLocationSummaryEntry row .1.3.6.1.4.1.4874.2.2.20.1.8.8.1
A specification of subscribers on an interface location.
Column Syntax OID
juniAaaSubscriberLocationSummaryLocationIndexThe value of a platform interface location.Juniper-TCJuniInterfaceLocationValue
Type Constraints:
range: 1..16
.1.3.6.1.4.1.4874.2.2.20.1.8.8.1.1
juniAaaSubscriberLocationSummaryCountThe number of subscribers associated with this interface location.SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.8.1.2
.1.3.6.1.4.1.4874.2.2.20.1.8.9 · 1 row entry · 3 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaSubscriberLocationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaSubscriberLocationTable'
The entries in this table sort subscribers by interface location.
juniAaaSubscriberLocationEntry row .1.3.6.1.4.1.4874.2.2.20.1.8.9.1
An association of a subscriber to an interface location.
Column Syntax OID
juniAaaSubscriberLocationLocationIndexThe value of a platform interface location.Juniper-TCJuniInterfaceLocationValue
Type Constraints:
range: 1..16
.1.3.6.1.4.1.4874.2.2.20.1.8.9.1.1
juniAaaSubscriberLocationHandleThe subscriber handle associated with this subscriber. A subscriber
handle is a monotonically increasing integer.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.9.1.2
juniAaaSubscriberLocationRowStatusAlways has value 'active'.SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4874.2.2.20.1.8.9.1.3
.1.3.6.1.4.1.4874.2.2.20.1.8.12 · 1 row entry · 2 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaSubscriberIpv6AddrPrefixTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaSubscriberIpv6AddrPrefixTable'
The entries in this table represent IPv6 Address Prefixes by subscriber
handle value.
juniAaaSubscriberIpv6AddrPrefixEntry row .1.3.6.1.4.1.4874.2.2.20.1.8.12.1
A specification of IPv6 Address Prefixes by subscriber handle.
Column Syntax OID
juniAaaSubscriberIpv6AddrPrefixThe client IPv6 Address Prefix assigned to this subscriber.IPV6-TCIpv6AddressPrefix
Type Constraints:
range: 0..16
.1.3.6.1.4.1.4874.2.2.20.1.8.12.1.1
juniAaaSubscriberIpv6AddrPrefixSizeThe size of the client IPv6 Address Prefix assigned to this
subscriber.
Integer32
Constraints:
range: 0-128
.1.3.6.1.4.1.4874.2.2.20.1.8.12.1.2
.1.3.6.1.4.1.4874.2.2.20.1.8.13 · 1 row entry · 14 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaSubscriberExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaSubscriberExtTable'
The entries in this table represent subscribers extension attributes 
by subscriber handle value.
juniAaaSubscriberExtEntry row .1.3.6.1.4.1.4874.2.2.20.1.8.13.1
A specification of subscribers extension attributes by subscriber
handle.
Column Syntax OID
juniAaaSubscriberExtUserNameThe user name associated with this subscriber.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4874.2.2.20.1.8.13.1.1
juniAaaSubscriberExtLoginTimeThe time this subscriber logged in using AAA protocol.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4874.2.2.20.1.8.13.1.2
juniAaaSubscriberExtIpAddressThe client IP Address assigned to this subscriber.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.4874.2.2.20.1.8.13.1.3
juniAaaSubscriberExtIpAddressMaskThe client IP Address Mask assigned to this subscriber.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.4874.2.2.20.1.8.13.1.4
juniAaaSubscriberExtAddrAssignTypeThe address assignment type for this subscriber.JuniAddressAssignType
Type Values:
0none
1radius
2localPool
3dhcp
4user
5application
6localAuthenticationServer
7notSet
.1.3.6.1.4.1.4874.2.2.20.1.8.13.1.5
juniAaaSubscriberExtStateThe state of this subscriber.JuniSubscriberState
Type Values:
0pending
1established
2deleting
3tunneling
4tunnelAcct
5terminated
6counted
7clientHandleSet
8sentAcctStart
.1.3.6.1.4.1.4874.2.2.20.1.8.13.1.6
juniAaaSubscriberExtClientTypeThe client type for this subscriber. Certain client types (e.g.,
'other') might be suppressed from representation in this table.
JuniSubscriberClientType
Type Values:
0ppp
1login
2ip
3config
4tunnel
5other
.1.3.6.1.4.1.4874.2.2.20.1.8.13.1.7
juniAaaSubscriberExtAcctSessionIdAccount session ID associated with this subscriber. The value
and encoding of this attribute depends on the way AAA protocol is
configured. For example it is attribute 44 for RADIUS.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4874.2.2.20.1.8.13.1.8
juniAaaSubscriberExtClassClassification attribute associated with this subscriber. The value
and encoding of this attribute depends on the way AAA protocol is
configured. For example it is attribute 25 for RADIUS.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4874.2.2.20.1.8.13.1.9
juniAaaSubscriberExtNasPortAssociated NAS port with this subscriber. The value and encoding of
this attribute depends on the way AAA protocol is configured. For
example it is attribute 5 for RADIUS.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.13.1.10
juniAaaSubscriberExtNasPortTypeAssociated NAS port type attribute associated with this subscriber.
The value and encoding of this attribute depends on the way AAA protocol
is configured. For example it is attribute 61 for RADIUS.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.13.1.11
juniAaaSubscriberExtCalledStationIdCalled ID associated with this subscriber. The value and encoding of
this attribute depends on the way AAA protocol is configured. For
example it is attribute 30 for RADIUS.
OctetString
Constraints:
range: 0-255
.1.3.6.1.4.1.4874.2.2.20.1.8.13.1.12
juniAaaSubscriberExtCallingStationIdCalling ID associated with this subscriber. The value and
encoding of this attribute depends on the way AAA protocol
is configured. For example it is attribute 31 for RADIUS.
OctetString
Constraints:
range: 0-255
.1.3.6.1.4.1.4874.2.2.20.1.8.13.1.13
juniAaaSubscriberExtL2tpTunnelIdL2TP Tunnel ID associated with this subscriber of concerned LNS.
A value 0 for this attribute indicates the terminated subscriber.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.4874.2.2.20.1.8.13.1.14
.1.3.6.1.4.1.4874.2.2.20.1.8.14 · 1 row entry · 3 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaSubscriberInterfaceSummaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaSubscriberInterfaceSummaryTable'
The entries in this table report number of subscribers per subscriber
interface which includes the port type (1 = atm; 2 = ethernet), slot,
port and sub-interface.
juniAaaSubscriberInterfaceSummaryEntry row .1.3.6.1.4.1.4874.2.2.20.1.8.14.1
A specification of subscribers on an subscriber interface.
Column Syntax OID
juniAaaSubscriberInterfaceSummaryIndexThe value of a subscriber interface.JuniSubscriberInterfaceValue
Type Constraints:
range: 1..16
.1.3.6.1.4.1.4874.2.2.20.1.8.14.1.1
juniAaaSubscriberSubInterfaceSummaryIndexThe value of a subscriber sub-interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4874.2.2.20.1.8.14.1.2
juniAaaSubscriberInterfaceSummaryCountThe number of subscribers associated with this subscriber interface.SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.14.1.3
.1.3.6.1.4.1.4874.2.2.20.1.8.15 · 1 row entry · 4 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaSubscriberInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaSubscriberInterfaceTable'
The subscriber entries in this table sorted by subscriber interface.
juniAaaSubscriberInterfaceEntry row .1.3.6.1.4.1.4874.2.2.20.1.8.15.1
An association of a subscriber to a subscriber interface.
Column Syntax OID
juniAaaSubscriberInterfaceIndexThe value of a subscriber interface. This includes the
port type (1 = ATM; 2 = Ethernet), slot, port, and sub-interface.
JuniSubscriberInterfaceValue
Type Constraints:
range: 1..16
.1.3.6.1.4.1.4874.2.2.20.1.8.15.1.1
juniAaaSubscriberSubInterfaceIndexThe value of a subscriber sub-interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4874.2.2.20.1.8.15.1.2
juniAaaSubscriberInterfaceHandleThe subscriber handle associated with this subscriber interface.
A subscriber handle is a monotonically increasing integer.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.15.1.3
juniAaaSubscriberInterfaceRowStatusAlways has value 'active'.SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4874.2.2.20.1.8.15.1.4
.1.3.6.1.4.1.4874.2.2.20.1.8.16 · 1 row entry · 2 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaSubscriberSlotSummaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaSubscriberSlotSummaryTable'
The entries in this table report number of subscribers per slot.
juniAaaSubscriberSlotSummaryEntry row .1.3.6.1.4.1.4874.2.2.20.1.8.16.1
A specification of subscribers for a slot.
Column Syntax OID
juniAaaSubscriberSlotSummarySlotIndexThe index of the slot.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.16.1.1
juniAaaSubscriberSlotSummaryCountThe number of subscribers on this slot.SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.16.1.2
.1.3.6.1.4.1.4874.2.2.20.1.8.17 · 1 row entry · 3 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaSubscriberSlotTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaSubscriberSlotTable'
The subscriber in this table sorted by slot.
juniAaaSubscriberSlotEntry row .1.3.6.1.4.1.4874.2.2.20.1.8.17.1
A specification of subscribers by slot.
Column Syntax OID
juniAaaSubscriberSlotIndexThe index of the slot.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.17.1.1
juniAaaSubscriberSlotHandleThe subscriber handle associated with this slot. The subscriber
handle is a monotonically increasing integer.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.17.1.2
juniAaaSubscriberSlotRowStatusAlways has value 'active'.SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4874.2.2.20.1.8.17.1.3
.1.3.6.1.4.1.4874.2.2.20.1.8.18 · 1 row entry · 2 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaSubscriberProfileSummaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaSubscriberProfileSummaryTable'
The entries in this table report number of subscribers per profile.
juniAaaSubscriberProfileSummaryEntry row .1.3.6.1.4.1.4874.2.2.20.1.8.18.1
A specification of subscribers for a profile.
Column Syntax OID
juniAaaSubscriberProfileSummaryProfileNameThe name of the profile.OctetString
Constraints:
range: 1-80
.1.3.6.1.4.1.4874.2.2.20.1.8.18.1.1
juniAaaSubscriberProfileSummaryCountThe number of subscribers on this profile.SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.18.1.2
.1.3.6.1.4.1.4874.2.2.20.1.8.19 · 1 row entry · 3 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaSubscriberProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaSubscriberProfileTable'
The entries in this table sort subscribers by profileName + profileHandle.
juniAaaSubscriberProfileEntry row .1.3.6.1.4.1.4874.2.2.20.1.8.19.1
A specification of subscribers by profile ID.
Column Syntax OID
juniAaaSubscriberProfileNameThe DCM profile name associated with this subscriber.OctetString
Constraints:
range: 1-80
.1.3.6.1.4.1.4874.2.2.20.1.8.19.1.1
juniAaaSubscriberProfileHandleThe subscriber handle associated with this subscriber. A subscriber
handle is a monotonically increasing integer.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.19.1.2
juniAaaSubscriberProfileRowStatusAlways has value 'active'.SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4874.2.2.20.1.8.19.1.3
.1.3.6.1.4.1.4874.2.2.20.1.8.20 · 1 row entry · 2 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniAaaSubscriberLagInterfaceSummaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-AAA-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-AAA-MIB::juniAaaSubscriberLagInterfaceSummaryTable'
The entries in this table report number of subscribers per lag.
juniAaaSubscriberLagInterfaceSummaryEntry row .1.3.6.1.4.1.4874.2.2.20.1.8.20.1
A specification of subscribers for a lag.
Column Syntax OID
juniAaaSubscriberLagInterfaceSummaryLagNameThe name of the lag.OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.4874.2.2.20.1.8.20.1.1
juniAaaSubscriberLagInterfaceSummaryCountThe number of subscribers on this lag.SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.20.1.8.20.1.2