portCtrlSpeedAndDuplex – Jetnet5010G

Object

column mandatory r/w Enumeration

Speed and duplex configuraion.
              
Different speed and duplex modes are available. There are speeds:
1000 megabits per second (Gigabit Ethernet), 100 megabits per 
second (Fast Ethernet), and 10 megabits per second (Legacy 
Ethernet). 
              
Full-duplex allows packets to be transmitted in both directions 
at the same time, while half-duplex allows a device to either 
transmit or receive, but not both at the same time. Full-duplex
may have double bandwidth than half-duplex.
              
You can configure manually from the possible options, listed from
best to worst:
  1Gb full-duplex(6)                  
  100Mb full-duplex(5)
  100Mb half-duplex(4) 
  10Mb full-duplex(3)
  10Mb half-duplex(2) 
              
Set to autoNegotiation(1) to allow the two interfaces on the link 
to exchange the capabilities and characteristics of the each side, 
and select the best operating mode automatically when a cable is 
plugged in.

Context

MIB: Jetnet5010G
OID: .1.3.6.1.4.1.24062.2.2.1.3.1.1.1.4
Type: column
Access: readwrite
Status: mandatory
Parent: portCtrlEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Jetnet5010G' -M '/opt/observium/mibs/korenix:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Jetnet5010G::portCtrlSpeedAndDuplex'

More examples

Read one indexed instance

/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'Jetnet5010G' -M '/opt/observium/mibs/korenix:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Jetnet5010G::portCtrlSpeedAndDuplex.<portCtrlIndex>'

Translate to a numeric OID

/usr/bin/snmptranslate -Pud -Ir -On -m 'Jetnet5010G' -M '/opt/observium/mibs/korenix:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'Jetnet5010G::portCtrlSpeedAndDuplex'

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	autoNegotiation
`2`	tenMbpsHalfDuplex
`3`	tenMbpsFullDuplex
`4`	hundredMbpsHalfDuplex
`5`	hundredMbpsFullDuplex
`6`	thousandMbpsFullDuplex