Jetnet5010G Table View

Table of descriptive information and configuration about
the IP of the device.

ipConfigurationEntry row .1.3.6.1.4.1.24062.2.2.1.2.3.1.1

Information configuring static IP or DHCP configuration
of the device.

Indexes

ipConfigurationIndex

Column	Syntax	OID
ipConfigurationIndexmandatory This object identifies IP configuration entries.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.2.3.1.1.1
ipConfigurationDHCPStatusmandatory Parameter configuring DHCP client functionality of the device. When enabled, device will be a DHCP client and request for the IP configuration from DHCP server. The Dynamic Host Configuration Protocol (…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.24062.2.2.1.2.3.1.1.2
ipConfigurationAddressmandatory The IP address of switch. An IP address (Internet Protocol address) is a unique address that devices use in order to identify and communicate with each other on a computer network utilizing the Internet Protocol stan…	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.24062.2.2.1.2.3.1.1.3
ipConfigurationSubMaskmandatory The subnet mask is a 32-bit number in the same format and representation as IP addresses. The subnet mask determines which bits in the IP address are interpreted as the network number, which as the subnetwork number,…	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.24062.2.2.1.2.3.1.1.4
ipConfigurationGatewaymandatory The default gateway IP address identifies the gateway (for example, a router) that receives and forwards those packets whose addresses are unknown to the local network. The agent uses the default gateway address when…	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.24062.2.2.1.2.3.1.1.5
ipConfigurationDNS1mandatory Parameter configuring the first DNS server of the device. The domain name system (DNS) stores and associates many types of information with domain names. Most importantly, it translates domain names (c…	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.24062.2.2.1.2.3.1.1.6
ipConfigurationDNS2mandatory Parameter configuring the second DNS server of the device.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.24062.2.2.1.2.3.1.1.7
ipConfigurationStatusmandatory The status of the IP configuration entry. Only one configuration entry is supported on the device. Set active(1) to activate the parameters of the entry on the device.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.24062.2.2.1.2.3.1.1.8

Table of descriptive information and configuration about NTP 
servers. 
          
NTP (Network Time Protocol) synchronizes timekeeping among a 
set of distributed time servers and clients. This synchronization 
allows events to be correlated when system logs are created and 
other time-specific events occur.
          
An NTP server is configured to synchronize NTP clients. Servers 
can be configured to synchronize any client or only specific 
clients. NTP servers, however, will accept no synchronization 
information from their clients and therefore will not let 
clients update or affect the server's time settings.
          
This switch acts as an NTP client, which tries to let its clock 
be set and synchronized by an external NTP timeserver. It can be 
configured to use multiple servers (upto 4 servers).

ntpEntry row .1.3.6.1.4.1.24062.2.2.1.2.4.4.3.1.1

Information configuring IP addresses of NTP servers.

Indexes

ntpIndex

Column	Syntax	OID
ntpIndexmandatory This object identifies the entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.2.4.4.3.1.1.1
ntpServerIPmandatory The IP address of an NTP Server. Set 0.0.0.0 or 255.255.255.255 to remove this config.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.24062.2.2.1.2.4.4.3.1.1.2

Table of descriptive information and configuration about
DHCP server of the switch.

dhcpServerPoolEntry row .1.3.6.1.4.1.24062.2.2.1.2.5.2.1

An entry containing DHCP server information
of the switch.

Indexes

dhcpServerPoolIndex

Column	Syntax	OID
dhcpServerPoolIndexmandatory The index of the Address Pool.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.2.5.2.1.1
dhcpServerPoolNamemandatory The address pool name.	OctetString Constraints: range: 1-20	.1.3.6.1.4.1.24062.2.2.1.2.5.2.1.2
dhcpServerPoolNetworkmandatory The Subnet of the IP Address Pool.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.24062.2.2.1.2.5.2.1.3
dhcpServerPoolSubMaskmandatory The subnet mask of the IP Address Pool.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.24062.2.2.1.2.5.2.1.4
dhcpServerPoolGatewaymandatory The gateway address of the IP Address Pool.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.24062.2.2.1.2.5.2.1.5
dhcpServerPoolLeaseTimemandatory The lease time(in second) of the Address Pool.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.2.5.2.1.6
dhcpServerPoolStatusmandatory The status of the Address Pool.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.24062.2.2.1.2.5.2.1.7

Table of descriptive information and configuration about
DHCP server of the switch.

dhcpExcludedEntry row .1.3.6.1.4.1.24062.2.2.1.2.5.3.1

An entry containing DHCP server information
of the switch.

Indexes

dhcpServerPoolIndex dhcpExcludedIndex

Column	Syntax	OID
dhcpExcludedIndexmandatory The index of the Excluded Table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.2.5.3.1.1
dhcpExcludedIpmandatory The IP address .	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.24062.2.2.1.2.5.3.1.2
dhcpExcludedStatusmandatory The status of a address pool.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.24062.2.2.1.2.5.3.1.3

Table of descriptive information and configuration about
DHCP server of the switch.

dhcpManualBindingEntry row .1.3.6.1.4.1.24062.2.2.1.2.5.4.1

An entry containing DHCP server information
of the switch.

Indexes

dhcpServerPoolIndex dhcpManualBindingIndex

Column	Syntax	OID
dhcpManualBindingIndexmandatory The index of the Static Binding Table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.2.5.4.1.1
dhcpManualBindingIpmandatory The IP address.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.24062.2.2.1.2.5.4.1.2
dhcpManualBindingMacmandatory The MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.24062.2.2.1.2.5.4.1.3
dhcpManualBindingStatusmandatory The status of the binding.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.24062.2.2.1.2.5.4.1.4

Table of descriptive information and configuration about
DHCP server of the switch.

dhcpStaticPortEntry row .1.3.6.1.4.1.24062.2.2.1.2.5.5.1

An entry containing DHCP server information
of the switch.

Indexes

dhcpServerPoolIndex dhcpStaticPortIndex

Column	Syntax	OID
dhcpStaticPortIndexmandatory The index of the StaticPort Table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.2.5.5.1.1
dhcpStaticPortNumbermandatory The port number .	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.2.5.5.1.2
dhcpStaticPortIpmandatory The IP address .	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.24062.2.2.1.2.5.5.1.3
dhcpStaticPortStatusmandatory The status of a static port entry.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.24062.2.2.1.2.5.5.1.4

DHCP server option82 table.

dhcpOption82Entry row .1.3.6.1.4.1.24062.2.2.1.2.5.6.1

DHCP server option82 entry.

Indexes

dhcpServerPoolIndex dhcpOption82Index

Column	Syntax	OID
dhcpOption82Indexmandatory The index of the table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.2.5.6.1.1
dhcpOption82CircuitIdTypemandatory The Circuit-ID type of this option.	Enumerationr/w Enumerated Values: 0 any 2 string 3 hexadecimal	.1.3.6.1.4.1.24062.2.2.1.2.5.6.1.2
dhcpOption82CircuitIdValuemandatory The Circuit-ID value of this option.	OctetStringr/w	.1.3.6.1.4.1.24062.2.2.1.2.5.6.1.3
dhcpOption82RemoteIdTypemandatory The Remote-ID type of this option.	Enumerationr/w Enumerated Values: 0 any 2 string 3 hexadecimal	.1.3.6.1.4.1.24062.2.2.1.2.5.6.1.4
dhcpOption82RemoteIdValuemandatory The Remote-ID value of this option.	OctetStringr/w	.1.3.6.1.4.1.24062.2.2.1.2.5.6.1.5
dhcpOption82Ipmandatory The IP Address bind to this option.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.24062.2.2.1.2.5.6.1.6
dhcpOption82Statusmandatory he status of a static port entry.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.24062.2.2.1.2.5.6.1.7

Table of descriptive information and configuration about
DHCP server of the switch.

dhcpServerLeasedEntry row .1.3.6.1.4.1.24062.2.2.1.2.5.7.1

An entry containing DHCP server information
of the switch.

Indexes

dhcpServerPoolIndex dhcpServerLeasedIndex

Column	Syntax	OID
dhcpServerLeasedIndexmandatory The index of the Leased Table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.2.5.7.1.1
dhcpServerLeasedIpmandatory The client IP address.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.24062.2.2.1.2.5.7.1.2
dhcpServerLeasedMacmandatory The client MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.24062.2.2.1.2.5.7.1.3
dhcpServerLeasedTypemandatory .	Enumeration Enumerated Values: 1 manual 2 dynamic	.1.3.6.1.4.1.24062.2.2.1.2.5.7.1.4
dhcpServerLeasedTimemandatory The lease time of the client.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.2.5.7.1.5

Description.

dhcpRelayAgentCircuitIdEntry row .1.3.6.1.4.1.24062.2.2.1.2.5.10.1

Description.

Indexes

dhcpRelayAgentCircuitIdPortNum

Column	Syntax	OID
dhcpRelayAgentCircuitIdPortNummandatory Description.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.2.5.10.1.1
dhcpRelayAgentCircuitIdValuemandatory Circuit-ID value of the Option82 added by Relay Agent, the format can be String or Hexadecimal value.	OctetStringr/w	.1.3.6.1.4.1.24062.2.2.1.2.5.10.1.3
dhcpRelayAgentCircuitIdDisplaymandatory Display the Circuit-ID value by Hexadecimal format	OctetString	.1.3.6.1.4.1.24062.2.2.1.2.5.10.1.4

Table of descriptive information and configuration about
DHCP relay helper address of the switch.

dhcpHelperAddressEntry row .1.3.6.1.4.1.24062.2.2.1.2.5.14.1

An entry containing DHCP relay information
of the switch.

Indexes

dhcpHelperAddress

Column	Syntax	OID
dhcpHelperAddressmandatory The IP address .	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.24062.2.2.1.2.5.14.1.1

Table of information and configuration for each ports.

portCtrlEntry row .1.3.6.1.4.1.24062.2.2.1.3.1.1.1

An entry containing information and configuration for a port.

Indexes

portCtrlIndex

Column	Syntax	OID
portCtrlIndexmandatory Index of the port control entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.3.1.1.1.1
portCtrlPortNamemandatory The name of port.	OctetString Constraints: range: 0-7	.1.3.6.1.4.1.24062.2.2.1.3.1.1.1.2
portCtrlPortStatusmandatory To enable or disable of this port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.24062.2.2.1.3.1.1.1.3
portCtrlSpeedAndDuplexmandatory Speed and duplex configuraion. Different speed and duplex modes are available. There are speeds: 1000 megabits per second (Gigabit Ethernet), 100 megabits per second (Fast Ethernet), and 10 megabits per …	Enumerationr/w Enumerated Values: 1 autoNegotiation 2 tenMbpsHalfDuplex 3 tenMbpsFullDuplex 4 hundredMbpsHalfDuplex 5 hundredMbpsFullDuplex 6 thousandMbpsFullDuplex	.1.3.6.1.4.1.24062.2.2.1.3.1.1.1.4
portCtrlFlowControlmandatory Flow control configuration. Flow control is used to throttle the throughput rate of an end station to avoid dropping packets during network congestion. If flow control mode is not set and if there is no…	Enumerationr/w Enumerated Values: 1 disable 2 symmetric	.1.3.6.1.4.1.24062.2.2.1.3.1.1.1.5
portCtrlPortDescriptionmandatory The description of port.	OctetStringr/w Constraints: range: 0-138	.1.3.6.1.4.1.24062.2.2.1.3.1.1.1.6

Table of descriptive and statistics information about 
each ports.

portStatusEntry row .1.3.6.1.4.1.24062.2.2.1.3.2.1.1

An entry containing statistics information of a port.

Indexes

portStatusIndex

Column	Syntax	OID
portStatusIndexmandatory Index of port statistic table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.3.2.1.1.1
portStatusTypemandatory Indicates the type of the port.	Enumeration Enumerated Values: 1 hundredBaseTX 2 thousandBaseT 3 hundredBaseFX 4 thousandBaseSX 5 thousandBaseLX 6 other 7 notPresent	.1.3.6.1.4.1.24062.2.2.1.3.2.1.1.2
portStatusLinkmandatory Indicate the link state of the port.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.24062.2.2.1.3.2.1.1.3
portStatusStatemandatory Indicate the state of the port.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.24062.2.2.1.3.2.1.1.4
portStatusSpeedDuplexmandatory Indicate the speed and duplex mode of the port.	Enumeration Enumerated Values: 1 autoNegotiation 2 tenMbpsHalfDuplex 3 tenMbpsFullDuplex 4 hundredMbpsHalfDuplex 5 hundredMbpsFullDuplex 6 thousandMbpsFullDuplex	.1.3.6.1.4.1.24062.2.2.1.3.2.1.1.5
portStatusFlowCtrlmandatory Indicate the flow control status of the port.	Enumeration Enumerated Values: 1 disable 2 symmetric	.1.3.6.1.4.1.24062.2.2.1.3.2.1.1.6
sfpVendermandatory The vender name of the Small Form Pluggable (SFP) optical transceiver module.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.24062.2.2.1.3.2.1.1.7
sfpWavelengthmandatory The wave length in nanometers (nm) of the Small Form Pluggable (SFP) optical transceiver module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.3.2.1.1.8
sfpDistancemandatory The maximum transimission distance in meters of the Small Form Pluggable (SFP) optical transceiver module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.3.2.1.1.9

Table of descriptive information about SFP

portSfpEntry row .1.3.6.1.4.1.24062.2.2.1.3.2.2.1

An entry containing SFP information of a port.

Indexes

portSfpIndex

Column	Syntax	OID
portSfpIndexmandatory Index of port SFP table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.3.2.2.1.1
portSfpEjectmandatory Eject SFP	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.24062.2.2.1.3.2.2.1.2
portSfpScanmandatory Scan SFP	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.24062.2.2.1.3.2.2.1.3
portSfpDdmStatusmandatory (1)Enable SFP digital diagnostic and monitoring. (2)Disable SFP digital diagnostic and monitoring.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.24062.2.2.1.3.2.2.1.4
portSfpDdmTempatureCurrentmandatory The current SFP Tempature of port.	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.24062.2.2.1.3.2.2.1.5
portSfpDdmTempatureRangemandatory The range of SFP Tempature of port.	OctetString Constraints: range: 0-31	.1.3.6.1.4.1.24062.2.2.1.3.2.2.1.6
portSfpDdmTxPowerCurrentmandatory The current SFP Transmitted Power of port.	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.24062.2.2.1.3.2.2.1.7
portSfpDdmTxPowerRangemandatory The range of SFP Transmitted Power of port.	OctetString Constraints: range: 0-31	.1.3.6.1.4.1.24062.2.2.1.3.2.2.1.8
portSfpDdmRxPowerCurrentmandatory The current SFP Receiveed Power of port.	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.24062.2.2.1.3.2.2.1.9
portSfpDdmRxPowerRangemandatory The range of SFP Receiveed Power of port.	OctetString Constraints: range: 0-31	.1.3.6.1.4.1.24062.2.2.1.3.2.2.1.10

Table of descriptive information and configuration about 
port rate limiting. You can set up bandwidth rate and packet 
limitation type for each ports.
          
Rate limiting is used to control the rate of traffic sent or 
received on a network interface. For ingress rate limiting, 
traffic that is less than or equal to the specified rate is 
received, whereas traffic that exceeds the rate is dropped.
For egress rate limiting, traffic that is less than or equal 
to the specified rate is sent, whereas traffic that exceeds 
the rate is dropped.

rateLimitingEntry row .1.3.6.1.4.1.24062.2.2.1.3.3.1.1

An entry containing information and configuration about
port rate limiting.

Indexes

rateLimitingPortNum

Column	Syntax	OID
rateLimitingPortNummandatory The port number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.3.3.1.1.1
rateLimitingIngressLimitTypemandatory The type of ingress packets to be filtered.	Enumerationr/w Enumerated Values: 1 all 2 broadcastMulticastFloodedUnicast 3 broadcastMulticast 4 broadcastOnly	.1.3.6.1.4.1.24062.2.2.1.3.3.1.1.2
rateLimitingIngressRatemandatory Ingress rate in Mbps, the rate range is from 1 Mbps to 100 Mbps and zero means no limit.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.3.3.1.1.3
rateLimitingEgressRatemandatory Egress rate in Mbps, the rate range is from 1 Mbps to 100 Mbps and zero means no limit. Egress rate limiting has effect on all types of packets, including unicast, multicast and broadcast packets.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.3.3.1.1.4

Table of descriptive information and configuration about
of each trunk group in this system.
          
Link aggregation, or IEEE 802.3ad, is a method of combining 
physical network links into a single logical link for 
increased bandwidth. With Link aggregation we are able to 
increase the capacity and availability of the communications 
channel between devices (both switches and end stations) 
using existing Fast Ethernet and Gigabit Ethernet technology. 
Two or more Gigabit Ethernet connections are combined in 
order to increase the bandwidth capability and to create 
resilient and redundant links. A set of multiple parallel 
physical links between two devices is grouped together to 
form a single logical link. 
          
Link Aggregation also provides load balancing where the 
processing and communications activity is distributed across 
the links in a trunk so that no single link is overwhelmed.

portTrunkAggregatorSettingEntry row .1.3.6.1.4.1.24062.2.2.1.3.4.1.1.1

Information controlling aggregator configuration.

Indexes

portTrunkPortIndex

Column	Syntax	OID
portTrunkPortIndexmandatory The port number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.3.4.1.1.1.1
portTrunkAggregatorGroupIdmandatory Trunk group Id. Upto 8 ports can be aggregated into a group and 5 groups can be configured in the device.	Enumerationr/w Enumerated Values: 1 trunkGroup1 2 trunkGroup2 3 trunkGroup3 4 trunkGroup4 5 trunkGroup5 6 none	.1.3.6.1.4.1.24062.2.2.1.3.4.1.1.1.2
portTrunkAggregatorTypemandatory The Aggregator type. You can assign the aggregator staticly by setting to static(1), or setting to lacp(2) to enable the LACP protocol. The Link Aggregation Control Protocol (LACP) is required for dyn…	Enumerationr/w Enumerated Values: 1 static 2 lacp	.1.3.6.1.4.1.24062.2.2.1.3.4.1.1.1.3

Table of descriptive information about trunk groups in 
the device.

portTrunkAggregatorStatusEntry row .1.3.6.1.4.1.24062.2.2.1.3.4.2.1.1

An entry containing information about current configuration
of trunk groups.

Indexes

portTrunkAggregatorGroupIndex

Column	Syntax	OID
portTrunkAggregatorGroupIndexmandatory The trunk group identifier.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.3.4.2.1.1.1
portTrunkAggregatorGroupTypemandatory The Aggregator type. (1) The trunk group is LACP disabled and configured staticly by administrator. (2) The trunk group is LACP enabled.	Enumeration Enumerated Values: 1 static 2 lacp	.1.3.6.1.4.1.24062.2.2.1.3.4.2.1.1.2
portTrunkAggregatorGroupMembermandatory The ports are aggregated with other ports.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.24062.2.2.1.3.4.2.1.1.3
portTrunkAggregatorIndividualmandatory A port is LACP enabled but not aggregated with other ports.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.24062.2.2.1.3.4.2.1.1.4
portTrunkAggregatorLinkDownmandatory The ports which are linked down.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.24062.2.2.1.3.4.2.1.1.5

Table of configuration about redundany protocol in the device.

multipleSuperRingConfigEntry row .1.3.6.1.4.1.24062.2.2.1.4.4.1.1

An entry containing information about current configuration
of rings.

Indexes

superRingConfigId

Column	Syntax	OID
superRingConfigIdmandatory Ring Id.	Integer32 Constraints: range: 0-31	.1.3.6.1.4.1.24062.2.2.1.4.4.1.1.1
superRingNamemandatory Super Ring name.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.24062.2.2.1.4.4.1.1.2
superRingConfigVersionmandatory Super Ring funtion version selection. Super Ring: Backward compatible with legacy super ring mechanism. Note: This model supports v1 non-Redundancy Management mode only. Rapid Super Ring: New mechanism. The recovery …	Enumerationr/w Enumerated Values: 1 superRing 2 rapidSuperRing 3 anyRing	.1.3.6.1.4.1.24062.2.2.1.4.4.1.1.3
superRingDevicePrioritymandatory Super Ring device priority setting.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.24062.2.2.1.4.4.1.1.4
superRingRingPort1mandatory RingPort1 should not equal to RingRort2.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.4.1.1.5
superRingRingPort2mandatory RingPort2 should not equal to RingRort1.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.4.1.1.6
superRingRingPort1PathCostmandatory	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.24062.2.2.1.4.4.1.1.7
superRingRingPort2PathCostmandatory	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.24062.2.2.1.4.4.1.1.8
superRingRapidDualHomingStatusmandatory Rapid Dual Homing funtion status. Rapid Dual Homing is a redundancy protocol, which is compatible with RSTP. (1) Rapid Dual Homing function is enabled. (2) Rapid Dual Homing function is disabled.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.24062.2.2.1.4.4.1.1.9
superRingStatusmandatory Status of this ring.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.24062.2.2.1.4.4.1.1.10
superChainStatusmandatory Status of this chain.	Enumerationr/w Enumerated Values: 0 disabled 1 member 2 border	.1.3.6.1.4.1.24062.2.2.1.4.4.1.1.11
superChainEdgePortmandatory EdgePort of the chain.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.4.1.1.12
superRingRapidDualHomingExtensionIdmandatory Rapid Dual Homing Extension ID. The Extension ID and Ring ID cannot be the same, when dual home to the same foreing network. The Extension ID range from 0 to 7. With the combination of Extension ID(0 to 7) and R…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.24062.2.2.1.4.4.1.1.13

Table of status information about redundany protocol in 
the device.

multipleSuperRingStatusEntry row .1.3.6.1.4.1.24062.2.2.1.4.4.2.1

An entry containing information about current status
of rings.

Indexes

superRingStatusId

Column	Syntax	OID
superRingStatusIdmandatory Ring Id.	Integer32 Constraints: range: 0-31	.1.3.6.1.4.1.24062.2.2.1.4.4.2.1.1
superRingVersionmandatory Super Ring funtion version selection. Super Ring: Backward compatible with legacy super ring mechanism. Note: This model supports v1 non-Redundancy Management mode only. Rapid Super Ring: New mechanism. The recovery …	Enumeration Enumerated Values: 1 superRing 2 rapidSuperRing 3 anyRing 4 notSupported	.1.3.6.1.4.1.24062.2.2.1.4.4.2.1.2
superRingDeviceRolemandatory Super Ring role status. (1) disabled. (2) Redundancy manager. (3) Non redundancy manager.	Enumeration Enumerated Values: 1 disabled 2 rm 3 non-RM	.1.3.6.1.4.1.24062.2.2.1.4.4.2.1.3
superRingRingPortList1mandatory Port list for ring port1.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.24062.2.2.1.4.4.2.1.4
superRingRingPortList2mandatory Port list for ring port2.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.24062.2.2.1.4.4.2.1.5
superRingRingStatusmandatory Super Ring ring status. (1) Disabled - The ring on this device is disabled. (1) Normal - Ring is complete. (2) Abnormal - Ring is not complete.	Enumeration Enumerated Values: 1 disabled 2 normal 3 abnormal	.1.3.6.1.4.1.24062.2.2.1.4.4.2.1.6
superRingRmMacmandatory RM mac address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.24062.2.2.1.4.4.2.1.7
superRingBlockedPortmandatory The blocked ports in ring Normal state.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.24062.2.2.1.4.4.2.1.8
superRingRoleTransitionCountmandatory	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.4.2.1.9
superRingRingStateTransitionCountmandatory	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.4.2.1.10
superChainRolemandatory	Enumeration Enumerated Values: 0 disabled 1 member 2 border	.1.3.6.1.4.1.24062.2.2.1.4.4.2.1.11
superChainEdgePortListmandatory Edge Port list for SuperChain.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.24062.2.2.1.4.4.2.1.12

Table of descriptive information and configuration about
STP on each port.

stpPerPortCfgEntry row .1.3.6.1.4.1.24062.2.2.1.4.5.7.1

Information configuring STP on a port.

Indexes

stpPerPortCfgPortNum

Column	Syntax	OID
stpPerPortCfgPortNummandatory The port number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.5.7.1.1
stpPerPortCfgStpStatemandatory Enable/Disable STP/RSTP/MSTP at this port. Disable STP state when connecting a device in order to avoid STP waiting periods.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.24062.2.2.1.4.5.7.1.2
stpPerPortCfgPathCostmandatory The cost of the path to the other bridge from this transmitting bridge at the specified port. Enter a number from 1 through 200000000. (0 will auto set path cost to standard recommended value)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.5.7.1.3
stpPerPortCfgLinkTypemandatory Some of the rapid state transactions that are possible within RSTP are dependent upon whether the Port concerned can only be connected to exactly one other Bridge(ie., it is served by a point-to-point LAN segment), or c…	Enumerationr/w Enumerated Values: 1 auto 2 point2Point 3 shared 4 notSupport	.1.3.6.1.4.1.24062.2.2.1.4.5.7.1.5
stpPerPortCfgEdgePortmandatory Present in implementations that support the identification of edge ports. All ports directly connected to end stations cannot create bridging loops in the network and can thus directly transition to forwarding, skipping…	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.24062.2.2.1.4.5.7.1.6

Table of descriptive information about root bridge
of rapid spanning tree in this system.

stpRootInformationEntry row .1.3.6.1.4.1.24062.2.2.1.4.6.1.1

An entry in the table, containing information
about root bridge information of the STP.

Indexes

stpRootInformationIndex

Column	Syntax	OID
stpRootInformationIndexmandatory Index of root bridge information table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.6.1.1.1
stpRootInformationRootAddressmandatory Root Address.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.24062.2.2.1.4.6.1.1.2
stpRootInformationRootPrioritymandatory Root Priority.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.6.1.1.3
stpRootInformationRootPortmandatory Root Port.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.24062.2.2.1.4.6.1.1.4
stpRootInformationRootPathCostmandatory Root Path Cost.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.6.1.1.5
stpRootInformationMaxAgemandatory Max Age.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.6.1.1.6
stpRootInformationHelloTimemandatory Hello Time.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.6.1.1.7
stpRootInformationForwardDelaymandatory Forward Delay Time.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.6.1.1.8

Table of descriptive information and configuration about
rapid spanning tree (Per port).

stpPerPortInfoEntry row .1.3.6.1.4.1.24062.2.2.1.4.6.2.1

An entry in the table, containing inforamtion
about STP (Per port).

Indexes

stpPerPortInfoPortNum

Column	Syntax	OID
stpPerPortInfoPortNummandatory Port number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.6.2.1.1
stpPerPortInfoRolemandatory Descriptive information about RSTP switch port roles: root(1) A forwarding port that has been elected for the spanning-tree topology. alternate(2) An alternate path to the root bridge. This …	Enumeration Enumerated Values: 1 root 2 alternated 3 designated 4 backup 5 disabled 6 nonStp 7 unknown	.1.3.6.1.4.1.24062.2.2.1.4.6.2.1.2
stpPerPortInfoStatemandatory	Enumeration Enumerated Values: 1 disabled 2 learning 3 forwarding 4 blocking 5 unknown 6 nonStp	.1.3.6.1.4.1.24062.2.2.1.4.6.2.1.3
stpPerPortInfoPathCostmandatory The cost of the path to the other bridge from this transmitting bridge at the specified port. Enter a number 1 through 200000000.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.6.2.1.4
stpPerPortInfoPrioritymandatory Decide which port should be blocked by priority in LAN. Enter a number 0 through 240 in steps of 16.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.6.2.1.5
stpPerPortInfoLinkTypemandatory Some of the rapid state transactions that are possible within RSTP are dependent upon whether the Port concerned can only be connected to exactly one other Bridge(ie., it is served by a point-to-point LAN segment), or c…	Enumeration Enumerated Values: 1 auto 2 point2Point 3 shared 4 notSupport	.1.3.6.1.4.1.24062.2.2.1.4.6.2.1.6
stpPerPortInfoEdgePortmandatory Present in implementations that support the identification of edge ports. All ports directly connected to end stations cannot create bridging loops in the network and can thus directly transition to forwarding, skipping…	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.24062.2.2.1.4.6.2.1.7

Table of descriptive information and configuration about
STP on each port.

mstpPerInstCfgEntry row .1.3.6.1.4.1.24062.2.2.1.4.7.3.1

Information configuring MSTP on a instance.

Indexes

mstpPerInstCfgInstanceID

Column	Syntax	OID
mstpPerInstCfgInstanceIDmandatory The instance ID.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.7.3.1.1
mstpPerInstCfgVlanGroupmandatory VLAN group of instance.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.24062.2.2.1.4.7.3.1.2
mstpPerInstCfgStatusmandatory Status of this Instance.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.24062.2.2.1.4.7.3.1.4

Table of descriptive information and configuration about
MSTP on each port.

mstpPerPortCfgEntry row .1.3.6.1.4.1.24062.2.2.1.4.7.4.1

Information configuring MSTP on a port.

Indexes

mstpPerPortCfgIndex

Column	Syntax	OID
mstpPerPortCfgIndexmandatory The index of MstpPerPortCfgEntry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.7.4.1.1
mstpPerPortCfgInstanceIDmandatory The instance ID.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.7.4.1.2
mstpPerPortCfgPortNummandatory The port number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.7.4.1.3
mstpPerPortCfgPathCostmandatory The cost of the path to the other bridge from this transmitting bridge at the specified port. Enter a number from 1 through 200000000. (0 will auto set path cost to standard recommended value)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.7.4.1.4
mstpPerPortCfgLinkTypemandatory Some of the rapid state transactions that are possible within RSTP are dependent upon whether the Port concerned can only be connected to exactly one other Bridge(ie., it is served by a point-to-point LAN segment), or c…	Enumerationr/w Enumerated Values: 1 auto 2 point2Point 3 shared 4 notSupport	.1.3.6.1.4.1.24062.2.2.1.4.7.4.1.6
mstpPerPortCfgEdgePortmandatory Present in implementations that support the identification of edge ports. All ports directly connected to end stations cannot create bridging loops in the network and can thus directly transition to forwarding, skipping…	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.24062.2.2.1.4.7.4.1.7

Table of descriptive information about root bridge
of rapid spanning tree in this system.

mstpRootInformationEntry row .1.3.6.1.4.1.24062.2.2.1.4.8.1.1

An entry in the table, containing information
about root bridge information of the MSTP.

Indexes

mstpRootInformationInstanceID

Column	Syntax	OID
mstpRootInformationInstanceIDmandatory The instance ID.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.8.1.1.1
mstpRootInformationRootAddressmandatory Root Address.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.24062.2.2.1.4.8.1.1.2
mstpRootInformationRootPrioritymandatory Root Priority.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.8.1.1.3
mstpRootInformationRootPortmandatory Root Port.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.24062.2.2.1.4.8.1.1.4
mstpRootInformationRootPathCostmandatory Root Path Cost.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.8.1.1.5
mstpRootInformationMaxAgemandatory Max Age.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.8.1.1.6
mstpRootInformationHelloTimemandatory Hello Time.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.8.1.1.7
mstpRootInformationForwardDelaymandatory Forward Delay Time.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.8.1.1.8

Table of descriptive information and configuration about
rapid spanning tree (Per port).

mstpPerPortInfoEntry row .1.3.6.1.4.1.24062.2.2.1.4.8.2.1

An entry in the table, containing information
about MSTP (Per port).

Indexes

mstpPerPortInfoIndex

Column	Syntax	OID
mstpPerPortInfoIndexmandatory The index of MstpPerPortInfoEntry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.8.2.1.1
mstpPerPortInfoInstanceIDmandatory The instance ID.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.8.2.1.2
mstpPerPortInfoPortNummandatory Port number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.8.2.1.3
mstpPerPortInfoRolemandatory Descriptive information about MSTP switch port roles: disabled(1) MSTP is disabled on this port. root(2) A forwarding port that has been elected for the spanning-tree topology. designated(3) A…	Enumeration Enumerated Values: 1 root 2 alternate 3 designated 4 backup 5 master 6 disabled 7 boundary 8 unknown	.1.3.6.1.4.1.24062.2.2.1.4.8.2.1.4
mstpPerPortInfoStatemandatory	Enumeration Enumerated Values: 1 disabled 2 listening 3 learning 4 forwarding 5 blocking 6 unknown	.1.3.6.1.4.1.24062.2.2.1.4.8.2.1.5
mstpPerPortInfoPathCostmandatory The cost of the path to the other bridge from this transmitting bridge at the specified port. Enter a number 1 through 200000000.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.8.2.1.6
mstpPerPortInfoPrioritymandatory Decide which port should be blocked by priority in LAN. Enter a number 0 through 240 in steps of 16.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.4.8.2.1.7
mstpPerPortInfoLinkTypemandatory Some of the rapid state transactions that are possible within MSTP are dependent upon whether the Port concerned can only be connected to exactly one other Bridge(ie., it is served by a point-to-point LAN segment), or c…	Enumeration Enumerated Values: 1 p2p-bound-stp 2 p2p-bound-rstp 3 p2p-bound-mstp 4 p2p-internal-mstp 5 shared-bound-stp 6 shared-bound-rstp 7 shared-bound-mstp 8 shared-internal-mstp	.1.3.6.1.4.1.24062.2.2.1.4.8.2.1.8
mstpPerPortInfoEdgePortmandatory Present in implementations that support the identification of edge ports. All ports directly connected to end stations cannot create bridging loops in the network and can thus directly transition to forwarding, skipping…	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.24062.2.2.1.4.8.2.1.9

A table containing per port control and status information 
for IEEE802.1Q VLAN configuration in the device.

dot1qPortVlanEntry row .1.3.6.1.4.1.24062.2.2.1.5.2.1.1

Information controlling IEEE802.1Q VLAN configuration for
a port on the device.

Indexes

dot1qPortIndex

Column	Syntax	OID
dot1qPortIndexmandatory The port identifier.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.24062.2.2.1.5.2.1.1.1
dot1qPvidmandatory The default Port VID, the VLAN ID assigned to an untagged frame or a Priority-Tagged frame received on the port.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.24062.2.2.1.5.2.1.1.2
dot1qPortAcceptableFrameTypesmandatory When admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged only frames received on this port. When admitAll(1), untagged frames or Priority-Tagged only frames received on this port will be…	Enumerationr/w Enumerated Values: 1 admitAll 2 admitOnlyVlanTagged	.1.3.6.1.4.1.24062.2.2.1.5.2.1.1.3
dot1qPortIngressFilteringmandatory When true(1) the device will discard incoming frames whose VLAN classification do not include this port in its Member set. When false(2), the port will accept all incoming frames regardless its VLAN classification. T…	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.24062.2.2.1.5.2.1.1.4

A table containing configuration information for each VLAN 
configured into the device by management. All entries are 
permanent and will be restored after the device is reset.
Upto 64 VLANs can be configured in this device.
          
IEEE 802.1Q Virtual LANs (VLANs) allow a single physical LAN 
to be partitioned into several smaller logical LANs. VLANs 
limit the broadcast domain, improve security and performance 
and are ideal for separating systems or departments from each 
other.

dot1qVlanStaticEntry row .1.3.6.1.4.1.24062.2.2.1.5.2.2.1

Static information of a VLAN configured into the device by
management.

Indexes

dot1qVlanIndex

Column	Syntax	OID
dot1qVlanIndexmandatory The VLAN Identifier (VID) refering to this VLAN. The valid range is from 1 to 4094.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.24062.2.2.1.5.2.2.1.1
dot1qVlanStaticNamemandatory An administratively assigned string, which is used to identify the VLAN.	OctetStringr/w Constraints: range: 0-12	.1.3.6.1.4.1.24062.2.2.1.5.2.2.1.2
dot1qVlanStaticEgressPortsmandatory The set of ports which are permanently configured to transmitting traffic for this VLAN as either tagged or untagged frames. Each octet within this value specifies a set of eight ports, with the first o…	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.24062.2.2.1.5.2.2.1.3
dot1qVlanStaticUntaggedPortsmandatory The set of ports which are permanently configured to transmitting traffic for this VLAN as untagged frames. Each octet within this value specifies a set of eight ports, with the first octet specifying po…	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.24062.2.2.1.5.2.2.1.4
dot1qVlanStaticTaggedPortsmandatory The set of ports which are permanently configured to transmitting traffic for this VLAN as tagged frames. Each octet within this value specifies a set of eight ports, with the first octet specifying port…	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.24062.2.2.1.5.2.2.1.5
dot1qVlanStaticRowStatusmandatory This object is used to manage to creation and deletion of a VLAN, and is used to indicate the status of this entry. To Creating and activate a VLAN, first select a unused VID for dot1qVlanIndex and then…	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.24062.2.2.1.5.2.2.1.6

A table containing per port control and status information 
for GVRP configuration in the device.

dot1qPortGvrpEntry row .1.3.6.1.4.1.24062.2.2.1.5.2.3.2.1

Information controlling GVRP configuration for a port on the
device.

Indexes

dot1qPortGvrpIndex

Column	Syntax	OID
dot1qPortGvrpIndexmandatory The port identifier.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.5.2.3.2.1.1
dot1qPortGvrpStatusmandatory The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device. When disabled(2) but dot1qGvrpStatus is still e…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.24062.2.2.1.5.2.3.2.1.2
dot1qPortGarpJoinTimermandatory The GARP Join timer, in centiseconds.	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.24062.2.2.1.5.2.3.2.1.3
dot1qPortGarpLeaveTimermandatory The GARP Leave time, in centiseconds.	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.24062.2.2.1.5.2.3.2.1.4
dot1qPortGarpLeaveAllTimermandatory The GARP LeaveAll time, in centiseconds.	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.24062.2.2.1.5.2.3.2.1.5

A table containing information about currently configured 
VLANs, either by (local or network) management, or dynamically 
created as a result of GVRP requests received.

dot1qVlanCurrentEntry row .1.3.6.1.4.1.24062.2.2.1.5.2.4.1

Information for a VLAN configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received.

Indexes

dot1qVlanCurrentIndex

Column	Syntax	OID
dot1qVlanCurrentIndexmandatory The VLAN Identifier (VID) refering to this VLAN.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.5.2.4.1.1
dot1qVlanCurrentEgressPortsmandatory The set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.24062.2.2.1.5.2.4.1.2
dot1qVlanCurrentUntaggedPortsmandatory The set of ports which are transmitting traffic for this VLAN as untagged frames.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.24062.2.2.1.5.2.4.1.3
dot1qVlanStatusmandatory This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. permanent(2) - this entry, correspondi…	Enumeration Enumerated Values: 1 other 2 permanent 3 dynamicGvrp	.1.3.6.1.4.1.24062.2.2.1.5.2.4.1.4

A table containing per tunnel access or uplink port information in the device.

dot1qTunnelPortEntry row .1.3.6.1.4.1.24062.2.2.1.5.2.5.2.1

Information controlling tunnel configuration for a port on the device.

Indexes

dot1qTunnelPortIndex

Column	Syntax	OID
dot1qTunnelPortIndexmandatory The port identifier.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.5.2.5.2.1.1
dot1qTunnelPortModemandatory Tunnel mode controls	Enumerationr/w Enumerated Values: 1 normal 2 access 3 uplink 4 uplink-add-pvid	.1.3.6.1.4.1.24062.2.2.1.5.2.5.2.1.2

A table containing per Private VLAN ID information in the device.

privateVlanIdEntry row .1.3.6.1.4.1.24062.2.2.1.5.3.1.1

Information controlling Private VLAN ID configuration on the device.

Indexes

privateVlanId

Column	Syntax	OID
privateVlanIdmandatory The Private VLAN ID.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.5.3.1.1.1
privateVlanIdTypemandatory Private VLAN ID type controls	Enumerationr/w Enumerated Values: 1 normal 2 community 3 isolated 4 primary	.1.3.6.1.4.1.24062.2.2.1.5.3.1.1.2

A table containing per Private VLAN Port information in the device.

privateVlanPortEntry row .1.3.6.1.4.1.24062.2.2.1.5.3.2.1

Information controlling Private VLAN Port configuration on the device.

Indexes

privateVlanPortIndex

Column	Syntax	OID
privateVlanPortIndexmandatory The Private Port Index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.5.3.2.1.1
privateVlanPortModemandatory Private VLAN Port mode controls	Enumerationr/w Enumerated Values: 1 normal 2 host 3 promiscuous	.1.3.6.1.4.1.24062.2.2.1.5.3.2.1.2

A table containing per Private VLAN host port association information in the device.

privateVlanHostAssociationEntry row .1.3.6.1.4.1.24062.2.2.1.5.3.3.1

Information controlling Private VLAN host port association configuration on the device.

Indexes

privateVlanHostAssociationPortIndex

Column	Syntax	OID
privateVlanHostAssociationPortIndexmandatory The Private Host Port Index.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.24062.2.2.1.5.3.3.1.1
privateVlanHostAssociationPrimaryVidmandatory Private VLAN host Port association primary VLAN ID. If enter 0 then clear setting.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.5.3.3.1.2
privateVlanHostAssociationSecondaryVidmandatory Private VLAN host Port association secondary VLAN ID(isolated/community). If enter 0 then clear setting.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.5.3.3.1.3

A table containing per Private VLAN promiscuous port mapping information in the device.

privateVlanMappingEntry row .1.3.6.1.4.1.24062.2.2.1.5.3.4.1

Information controlling Private VLAN promiscuous port mapping configuration on the device.

Indexes

privateVlanMappingPromiscuousPortIndex

Column	Syntax	OID
privateVlanMappingPromiscuousPortIndexmandatory The Private Promiscuous Port Index.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.24062.2.2.1.5.3.4.1.1
privateVlanMappingPrimaryVidmandatory Private VLAN promiscuous Port mapping primary VLAN ID. If enter 0 then clear setting.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.5.3.4.1.2
privateVlanMappingSecondaryVidListmandatory Private VLAN promiscuous Port mapping secondary VLAN ID list. If enter zero-length string then clear setting.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.24062.2.2.1.5.3.4.1.3

Table of descriptive information and configuration about
port default cos value.

qosPortDefaultCosEntry row .1.3.6.1.4.1.24062.2.2.1.6.2.1

An entry in the table, containing inforamtion
about port default cos value.

Indexes

qosPortNum

Column	Syntax	OID
qosPortNummandatory Port number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.6.2.1.1
qosPortDefaultCosmandatory The port priority will follow the default port priority	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.24062.2.2.1.6.2.1.3

Table of descriptive information and configuration about
COS QOS.

qosCOSEntry row .1.3.6.1.4.1.24062.2.2.1.6.3.1

An entry in the table, containing inforamtion about COS QOS.

Indexes

qosCOSPriority

Column	Syntax	OID
qosCOSPrioritymandatory COS priority.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.24062.2.2.1.6.3.1.1
qosCOSmandatory The port priority will follow the COS priority that you have assigned (0)low, (1)middle, (2)high, or (3)highest.	Enumerationr/w Enumerated Values: 0 low 1 middle 2 high 3 highest	.1.3.6.1.4.1.24062.2.2.1.6.3.1.2

Table of descriptive information and configuration about
DSCP QOS.

qosDscpEntry row .1.3.6.1.4.1.24062.2.2.1.6.4.1

An entry in the table, containing inforamtion
about DSCP QOS.

Indexes

qosDscpPriority

Column	Syntax	OID
qosDscpPrioritymandatory Dscp priority.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.24062.2.2.1.6.4.1.1
qosDscpmandatory The port priority will follow the Dscp priority that you have assigned (0)low (1)middle, (2)high, (3)highest.	Enumerationr/w Enumerated Values: 0 low 1 middle 2 high 3 highest	.1.3.6.1.4.1.24062.2.2.1.6.4.1.2

Table of descriptive information about on which vlan is IGMP 
snooping enabled.

igmpSnoopingEntry row .1.3.6.1.4.1.24062.2.2.1.7.2.2.1

Inforamtion enabling or disabling IGMP snooping on a vlan.

Indexes

igmpSnoopingEntryVID

Column	Syntax	OID
igmpSnoopingEntryVIDmandatory The vlan id.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.7.2.2.1.1
igmpSnoopingEntryStatusmandatory The state of igmp snooping functionality on a vlan. Set to enabled(1) indicates that igmp snooping is enabled on the vlan. When igmpSnoopingStatus is also turned on, each IGMP packets on the vlan will be processed. Wh…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.24062.2.2.1.7.2.2.1.2

Table of descriptive information about IGMP snooped multicast 
groups.

igmpSnoopingGroupEntry row .1.3.6.1.4.1.24062.2.2.1.7.2.3.1

Information containing a multicast group and its member ports.

Indexes

igmpSnoopingGroupEntryVID igmpSnoopingGroupEntryIPAddr

Column	Syntax	OID
igmpSnoopingGroupEntryVIDmandatory The VLAN ID of an IGMP entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.7.2.3.1.1
igmpSnoopingGroupEntryIPAddrmandatory The multicast group IP address.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.24062.2.2.1.7.2.3.1.2
igmpSnoopingGroupEntryMembersmandatory The member ports of the group.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.24062.2.2.1.7.2.3.1.3

Table of information configuring community strings of 
SNMP agent.
          
An SNMP community string is a text string that acts as 
a password. It is used to authenticate messages that 
are sent between the management station (the SNMP manager) 
and the device (the SNMP agent). The community string is 
included in every packet that is transmitted between the 
SNMP manager and the SNMP agent. 
          
After receiving an SNMP request, the SNMP agent compares 
the community string in the request to the community 
strings that are configured for the agent. The requests 
are valid under these circumstances: 
          
- Only SNMP Get and Get-next requests are valid if the 
  community string in the request matches the read-only 
  community. 
          
- SNMP Get, Get-next, and Set requests are valid if the 
  community string in the request matches the agent's 
  read-write community.
          
By default, 'public' is the read-only community and 
'private' is the read-write community. Total 4 community
strings are allowed to configure in the device.

snmpCommunityStringEntry row .1.3.6.1.4.1.24062.2.2.1.8.1.1

Inforamtion configuring an community string.

Indexes

snmpCommunityStringIndex

Column	Syntax	OID
snmpCommunityStringIndexmandatory Index of community string.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.8.1.1.1
snmpCommunityStringNamemandatory A community string with maximum 32 characters.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.24062.2.2.1.8.1.1.2
snmpCommunityStringPrivilegemandatory The access privilege of the community string.	Enumerationr/w Enumerated Values: 1 ro 2 rw	.1.3.6.1.4.1.24062.2.2.1.8.1.1.3
snmpCommunityStringStatusmandatory The status of this entry. Set to (5)createAndWait to create a new entry. A new entry or an active entry can be edited. Once an entry is modified, its status becomes (3)notReady. Set to (1)active to apply the modificati…	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.24062.2.2.1.8.1.1.4

Table of descriptive and information about trap servers.
A trap server is the recipient of an SNMP trap. The device 
does not send a trap unless it knows to which station it 
should send a trap.

snmpV3UserEntry row .1.3.6.1.4.1.24062.2.2.1.8.2.1

An entry in the table, containing inforamtion about a
trap server of SNMP agent.

Indexes

snmpTrapServerIndex

Column	Syntax	OID
snmpV3UserIndexmandatory Index of snmp v3 user.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.8.2.1.1
snmpV3UserNamemandatory	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.24062.2.2.1.8.2.1.2
snmpV3UserSecurityLevelmandatory Specifiy the authentication and privacy level - noauth(1) no authentication and no privacy. - auth(2) enables MD5 or SHA packet authentication. - priv(3) enables MD5 or SHA packet authentication and DES …	Enumerationr/w Enumerated Values: 1 noauth 2 auth 3 priv	.1.3.6.1.4.1.24062.2.2.1.8.2.1.3
snmpV3UserAuthProtocolmandatory MD5(Message Digest 5) or SHA (Secure Hash Algorithm)	Enumerationr/w Enumerated Values: 1 none 2 md5 3 sha	.1.3.6.1.4.1.24062.2.2.1.8.2.1.4
snmpV3UserAuthPasswordmandatory	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.24062.2.2.1.8.2.1.5
snmpV3UserDesPasswordmandatory	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.24062.2.2.1.8.2.1.6
snmpV3UserStatusmandatory	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.24062.2.2.1.8.2.1.7

Table of descriptive and information about trap servers.
A trap server is the recipient of an SNMP trap. The device 
does not send a trap unless it knows to which station it 
should send a trap.

snmpTrapServerEntry row .1.3.6.1.4.1.24062.2.2.1.8.4.1

An entry in the table, containing inforamtion about a
trap server of SNMP agent.

Indexes

snmpTrapServerIndex

Column	Syntax	OID
snmpTrapServerIndexmandatory Index of trap server.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.8.4.1.1
snmpTrapServerIPAddrmandatory Trap Server IP Address.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.24062.2.2.1.8.4.1.2
snmpTrapServerTrapCommmandatory The community string of trap server. The password-like string will be sent with the notification operation.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.24062.2.2.1.8.4.1.3
snmpTrapServerTrapVermandatory The trap version.	Enumerationr/w Enumerated Values: 1 v1 2 v2c	.1.3.6.1.4.1.24062.2.2.1.8.4.1.4
snmpTrapServerStatusmandatory The status of this entry. Set to (5)createAndWait to create a new entry. A new entry or an active entry can be edited. Once an entry is modified, its status becomes (3)notReady. Set to (1)active to apply the modificati…	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.24062.2.2.1.8.4.1.5

A table containing information about port security status on 
each port.
          
Port security prevents a port from address learning. Only 
those MAC addresses that are configured by management are 
allowed to access the switch or transmit/receive through the
port. Upto 10 MAC addresses can assigned to each port by adding
address entries to portSecurityMacTable or macAddrTable. 
          
If the port security functionality is enabled but without any 
MAC address configured on a port, no traffic can access the 
switch or transmit/receive from the port.

portSecurityStatusEntry row .1.3.6.1.4.1.24062.2.2.1.9.1.1.1

An entry configuring port security for a port.

Indexes

portSecurityPortIndex

Column	Syntax	OID
portSecurityPortIndexmandatory The port id.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.24062.2.2.1.9.1.1.1.1
portSecurityPortStatusmandatory (1)enable port security on this port. (2)disable port security on this port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.24062.2.2.1.9.1.1.1.2